USING THE IJG JPEG LIBRARY

Copyright (C) 1994-2013, Thomas G. Lane, Guido Vollbeding.

This file is part of the Independent JPEG Group's software.

For conditions of distribution and use, see the accompanying README file.

This file describes how to use the IJG JPEG library within an application

program. Read it if you want to write a program that uses the library.

The file example.c provides heavily commented skeleton code for calling the

JPEG library. Also see jpeglib.h (the include file to be used by application

programs) for full details about data structures and function parameter lists.

The library source code, of course, is the ultimate reference.

Note that there have been *major* changes from the application interface

presented by IJG version 4 and earlier versions. The old design had several

inherent limitations, and it had accumulated a lot of cruft as we added

features while trying to minimize application-interface changes. We have

sacrificed backward compatibility in the version 5 rewrite, but we think the

improvements justify this.

TABLE OF CONTENTS

-----------------

Overview:

Functions provided by the library

Outline of typical usage

Basic library usage:

Data formats

Compression details

Decompression details

Mechanics of usage: include files, linking, etc

Advanced features:

Compression parameter selection

Decompression parameter selection

Special color spaces

Error handling

Compressed data handling (source and destination managers)

I/O suspension

Progressive JPEG support

Buffered-image mode

Abbreviated datastreams and multiple images

Special markers

Raw (downsampled) image data

Really raw data: DCT coefficients

Progress monitoring

Memory management

Memory usage

Library compile-time options

Portability considerations

Notes for MS-DOS implementors

You should read at least the overview and basic usage sections before trying

to program with the library. The sections on advanced features can be read

if and when you need them.

OVERVIEW

========

Functions provided by the library

---------------------------------

The IJG JPEG library provides C code to read and write JPEG-compressed image

files. The surrounding application program receives or supplies image data a

scanline at a time, using a straightforward uncompressed image format. All

details of color conversion and other preprocessing/postprocessing can be

handled by the library.

The library includes a substantial amount of code that is not covered by the

JPEG standard but is necessary for typical applications of JPEG. These

functions preprocess the image before JPEG compression or postprocess it after

decompression. They include colorspace conversion, downsampling/upsampling,

and color quantization. The application indirectly selects use of this code

by specifying the format in which it wishes to supply or receive image data.

For example, if colormapped output is requested, then the decompression

library automatically invokes color quantization.

A wide range of quality vs. speed tradeoffs are possible in JPEG processing,

and even more so in decompression postprocessing. The decompression library

provides multiple implementations that cover most of the useful tradeoffs,

ranging from very-high-quality down to fast-preview operation. On the

compression side we have generally not provided low-quality choices, since

compression is normally less time-critical. It should be understood that the

low-quality modes may not meet the JPEG standard's accuracy requirements;

nonetheless, they are useful for viewers.

A word about functions *not* provided by the library. We handle a subset of

the ISO JPEG standard; most baseline, extended-sequential, and progressive

JPEG processes are supported. (Our subset includes all features now in common

use.) Unsupported ISO options include:

* Hierarchical storage

* Lossless JPEG

* DNL marker

* Nonintegral subsampling ratios

We support 8-bit to 12-bit data precision, but this is a compile-time choice

rather than a run-time choice; hence it is difficult to use different

precisions in a single application.

By itself, the library handles only interchange JPEG datastreams --- in

particular the widely used JFIF file format. The library can be used by

surrounding code to process interchange or abbreviated JPEG datastreams that

are embedded in more complex file formats. (For example, this library is

used by the free LIBTIFF library to support JPEG compression in TIFF.)

Outline of typical usage

------------------------

The rough outline of a JPEG compression operation is:

Allocate and initialize a JPEG compression object

Specify the destination for the compressed data (eg, a file)

Set parameters for compression, including image size & colorspace

jpeg_start_compress(...);

while (scan lines remain to be written)

jpeg_write_scanlines(...);

jpeg_finish_compress(...);

Release the JPEG compression object

A JPEG compression object holds parameters and working state for the JPEG

library. We make creation/destruction of the object separate from starting

or finishing compression of an image; the same object can be re-used for a

series of image compression operations. This makes it easy to re-use the

same parameter settings for a sequence of images. Re-use of a JPEG object

also has important implications for processing abbreviated JPEG datastreams,

as discussed later.

The image data to be compressed is supplied to jpeg_write_scanlines() from

in-memory buffers. If the application is doing file-to-file compression,

reading image data from the source file is the application's responsibility.

The library emits compressed data by calling a "data destination manager",

which typically will write the data into a file; but the application can

provide its own destination manager to do something else.

Similarly, the rough outline of a JPEG decompression operation is:

Allocate and initialize a JPEG decompression object

Specify the source of the compressed data (eg, a file)

Call jpeg_read_header() to obtain image info

Set parameters for decompression

jpeg_start_decompress(...);

while (scan lines remain to be read)

jpeg_read_scanlines(...);

jpeg_finish_decompress(...);

Release the JPEG decompression object

This is comparable to the compression outline except that reading the

datastream header is a separate step. This is helpful because information

about the image's size, colorspace, etc is available when the application

selects decompression parameters. For example, the application can choose an

output scaling ratio that will fit the image into the available screen size.

The decompression library obtains compressed data by calling a data source

manager, which typically will read the data from a file; but other behaviors

can be obtained with a custom source manager. Decompressed data is delivered

into in-memory buffers passed to jpeg_read_scanlines().

It is possible to abort an incomplete compression or decompression operation

by calling jpeg_abort(); or, if you do not need to retain the JPEG object,

simply release it by calling jpeg_destroy().

JPEG compression and decompression objects are two separate struct types.

However, they share some common fields, and certain routines such as

jpeg_destroy() can work on either type of object.

The JPEG library has no static variables: all state is in the compression

or decompression object. Therefore it is possible to process multiple

compression and decompression operations concurrently, using multiple JPEG

objects.

Both compression and decompression can be done in an incremental memory-to-

memory fashion, if suitable source/destination managers are used. See the

section on "I/O suspension" for more details.

BASIC LIBRARY USAGE

===================

Data formats

------------

Before diving into procedural details, it is helpful to understand the

image data format that the JPEG library expects or returns.

The standard input image format is a rectangular array of pixels, with each

pixel having the same number of "component" or "sample" values (color

channels). You must specify how many components there are and the colorspace

interpretation of the components. Most applications will use RGB data

(three components per pixel) or grayscale data (one component per pixel).

PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE.

A remarkable number of people manage to miss this, only to find that their

programs don't work with grayscale JPEG files.

There is no provision for colormapped input. JPEG files are always full-color

or full grayscale (or sometimes another colorspace such as CMYK). You can

feed in a colormapped image by expanding it to full-color format. However

JPEG often doesn't work very well with source data that has been colormapped,

because of dithering noise. This is discussed in more detail in the JPEG FAQ

and the other references mentioned in the README file.

Pixels are stored by scanlines, with each scanline running from left to

right. The component values for each pixel are adjacent in the row; for

example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color. Each scanline is an

array of data type JSAMPLE --- which is typically "unsigned char", unless

you've changed jmorecfg.h. (You can also change the RGB pixel layout, say

to B,G,R order, by modifying jmorecfg.h. But see the restrictions listed in

that file before doing so.)

A 2-D array of pixels is formed by making a list of pointers to the starts of

scanlines; so the scanlines need not be physically adjacent in memory. Even

if you process just one scanline at a time, you must make a one-element

pointer array to conform to this structure. Pointers to JSAMPLE rows are of

type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY.

The library accepts or supplies one or more complete scanlines per call.

It is not possible to process part of a row at a time. Scanlines are always

processed top-to-bottom. You can process an entire image in one call if you

have it all in memory, but usually it's simplest to process one scanline at

a time.

For best results, source data values should have the precision specified by

BITS_IN_JSAMPLE (normally 8 bits). For instance, if you choose to compress

data that's only 6 bits/channel, you should left-justify each value in a

byte before passing it to the compressor. If you need to compress data

that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 9 to 12.

(See "Library compile-time options", later.)

The data format returned by the decompressor is the same in all details,

except that colormapped output is supported. (Again, a JPEG file is never

colormapped. But you can ask the decompressor to perform on-the-fly color

quantization to deliver colormapped output.) If you request colormapped

output then the returned data array contains a single JSAMPLE per pixel;

its value is an index into a color map. The color map is represented as

a 2-D JSAMPARRAY in which each row holds the values of one color component,

that is, colormap[i][j] is the value of the i'th color component for pixel

value (map index) j. Note that since the colormap indexes are stored in

JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE

(ie, at most 256 colors for an 8-bit JPEG library).

Compression details

-------------------

Here we revisit the JPEG compression outline given in the overview.

1. Allocate and initialize a JPEG compression object.

A JPEG compression object is a "struct jpeg_compress_struct". (It also has

a bunch of subsidiary structures which are allocated via malloc(), but the

application doesn't control those directly.) This struct can be just a local

variable in the calling routine, if a single routine is going to execute the

whole JPEG compression sequence. Otherwise it can be static or allocated

from malloc().

You will also need a structure representing a JPEG error handler. The part

of this that the library cares about is a "struct jpeg_error_mgr". If you

are providing your own error handler, you'll typically want to embed the

jpeg_error_mgr struct in a larger structure; this is discussed later under

"Error handling". For now we'll assume you are just using the default error

handler. The default error handler will print JPEG error/warning messages

on stderr, and it will call exit() if a fatal error occurs.

You must initialize the error handler structure, store a pointer to it into

the JPEG object's "err" field, and then call jpeg_create_compress() to

initialize the rest of the JPEG object.

Typical code for this step, if you are using the default error handler, is

struct jpeg_compress_struct cinfo;

struct jpeg_error_mgr jerr;

...

cinfo.err = jpeg_std_error(&jerr);

jpeg_create_compress(&cinfo);

jpeg_create_compress allocates a small amount of memory, so it could fail

if you are out of memory. In that case it will exit via the error handler;

that's why the error handler must be initialized first.

2. Specify the destination for the compressed data (eg, a file).

As previously mentioned, the JPEG library delivers compressed data to a

"data destination" module. The library includes one data destination

module which knows how to write to a stdio stream. You can use your own

destination module if you want to do something else, as discussed later.

If you use the standard destination module, you must open the target stdio

stream beforehand. Typical code for this step looks like:

FILE * outfile;

...

if ((outfile = fopen(filename, "wb")) == NULL) {

fprintf(stderr, "can't open %s\n", filename);

exit(1);

}

jpeg_stdio_dest(&cinfo, outfile);

where the last line invokes the standard destination module.

WARNING: it is critical that the binary compressed data be delivered to the

output file unchanged. On non-Unix systems the stdio library may perform

newline translation or otherwise corrupt binary data. To suppress this

behavior, you may need to use a "b" option to fopen (as shown above), or use

setmode() or another routine to put the stdio stream in binary mode. See

cjpeg.c and djpeg.c for code that has been found to work on many systems.

You can select the data destination after setting other parameters (step 3),

if that's more convenient. You may not change the destination between

calling jpeg_start_compress() and jpeg_finish_compress().

3. Set parameters for compression, including image size & colorspace.

You must supply information about the source image by setting the following

fields in the JPEG object (cinfo structure):

image_width Width of image, in pixels

image_height Height of image, in pixels

input_components Number of color channels (samples per pixel)

in_color_space Color space of source image

The image dimensions are, hopefully, obvious. JPEG supports image dimensions

of 1 to 64K pixels in either direction. The input color space is typically

RGB or grayscale, and input_components is 3 or 1 accordingly. (See "Special

color spaces", later, for more info.) The in_color_space field must be

assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or

JCS_GRAYSCALE.

JPEG has a large number of compression parameters that determine how the

image is encoded. Most applications don't need or want to know about all

these parameters. You can set all the parameters to reasonable defaults by

calling jpeg_set_defaults(); then, if there are particular values you want

to change, you can do so after that. The "Compression parameter selection"

section tells about all the parameters.

You must set in_color_space correctly before calling jpeg_set_defaults(),

because the defaults depend on the source image colorspace. However the

other three source image parameters need not be valid until you call

jpeg_start_compress(). There's no harm in calling jpeg_set_defaults() more

than once, if that happens to be convenient.

Typical code for a 24-bit RGB source image is

cinfo.image_width = Width; /* image width and height, in pixels */

cinfo.image_height = Height;

cinfo.input_components = 3; /* # of color components per pixel */

cinfo.in_color_space = JCS_RGB; /* colorspace of input image */

jpeg_set_defaults(&cinfo);

/* Make optional parameter settings here */

4. jpeg_start_compress(...);

After you have established the data destination and set all the necessary

source image info and other parameters, call jpeg_start_compress() to begin

a compression cycle. This will initialize internal state, allocate working

storage, and emit the first few bytes of the JPEG datastream header.

Typical code:

jpeg_start_compress(&cinfo, TRUE);

The "TRUE" parameter ensures that a complete JPEG interchange datastream

will be written. This is appropriate in most cases. If you think you might

want to use an abbreviated datastream, read the section on abbreviated

datastreams, below.

Once you have called jpeg_start_compress(), you may not alter any JPEG

parameters or other fields of the JPEG object until you have completed

the compression cycle.

5. while (scan lines remain to be written)

jpeg_write_scanlines(...);

Now write all the required image data by calling jpeg_write_scanlines()

one or more times. You can pass one or more scanlines in each call, up

to the total image height. In most applications it is convenient to pass

just one or a few scanlines at a time. The expected format for the passed

data is discussed under "Data formats", above.

Image data should be written in top-to-bottom scanline order. The JPEG spec

contains some weasel wording about how top and bottom are application-defined

terms (a curious interpretation of the English language...) but if you want

your files to be compatible with everyone else's, you WILL use top-to-bottom

order. If the source data must be read in bottom-to-top order, you can use

the JPEG library's virtual array mechanism to invert the data efficiently.

Examples of this can be found in the sample application cjpeg.

The library maintains a count of the number of scanlines written so far

in the next_scanline field of the JPEG object. Usually you can just use

this variable as the loop counter, so that the loop test looks like

"while (cinfo.next_scanline < cinfo.image_height)".

Code for this step depends heavily on the way that you store the source data.

example.c shows the following code for the case of a full-size 2-D source

array containing 3-byte RGB pixels:

JSAMPROW row_pointer[1]; /* pointer to a single row */

int row_stride; /* physical row width in buffer */

row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */

while (cinfo.next_scanline < cinfo.image_height) {

row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];

jpeg_write_scanlines(&cinfo, row_pointer, 1);

}

jpeg_write_scanlines() returns the number of scanlines actually written.

This will normally be equal to the number passed in, so you can usually

ignore the return value. It is different in just two cases:

* If you try to write more scanlines than the declared image height,

the additional scanlines are ignored.

* If you use a suspending data destination manager, output buffer overrun

will cause the compressor to return before accepting all the passed lines.

This feature is discussed under "I/O suspension", below. The normal

stdio destination manager will NOT cause this to happen.

In any case, the return value is the same as the change in the value of

next_scanline.

6. jpeg_finish_compress(...);

After all the image data has been written, call jpeg_finish_compress() to

complete the compression cycle. This step is ESSENTIAL to ensure that the

last bufferload of data is written to the data destination.

jpeg_finish_compress() also releases working memory associated with the JPEG

object.

Typical code:

jpeg_finish_compress(&cinfo);

If using the stdio destination manager, don't forget to close the output

stdio stream (if necessary) afterwards.

If you have requested a multi-pass operating mode, such as Huffman code

optimization, jpeg_finish_compress() will perform the additional passes using

data buffered by the first pass. In this case jpeg_finish_compress() may take

quite a while to complete. With the default compression parameters, this will

not happen.

It is an error to call jpeg_finish_compress() before writing the necessary

total number of scanlines. If you wish to abort compression, call

jpeg_abort() as discussed below.

After completing a compression cycle, you may dispose of the JPEG object

as discussed next, or you may use it to compress another image. In that case

return to step 2, 3, or 4 as appropriate. If you do not change the

destination manager, the new datastream will be written to the same target.

If you do not change any JPEG parameters, the new datastream will be written

with the same parameters as before. Note that you can change the input image

dimensions freely between cycles, but if you change the input colorspace, you

should call jpeg_set_defaults() to adjust for the new colorspace; and then

you'll need to repeat all of step 3.

7. Release the JPEG compression object.

When you are done with a JPEG compression object, destroy it by calling

jpeg_destroy_compress(). This will free all subsidiary memory (regardless of

the previous state of the object). Or you can call jpeg_destroy(), which

works for either compression or decompression objects --- this may be more

convenient if you are sharing code between compression and decompression

cases. (Actually, these routines are equivalent except for the declared type

of the passed pointer. To avoid gripes from ANSI C compilers, jpeg_destroy()

should be passed a j_common_ptr.)

If you allocated the jpeg_compress_struct structure from malloc(), freeing

it is your responsibility --- jpeg_destroy() won't. Ditto for the error

handler structure.

Typical code:

jpeg_destroy_compress(&cinfo);

8. Aborting.

If you decide to abort a compression cycle before finishing, you can clean up

in either of two ways:

* If you don't need the JPEG object any more, just call

jpeg_destroy_compress() or jpeg_destroy() to release memory. This is

legitimate at any point after calling jpeg_create_compress() --- in fact,

it's safe even if jpeg_create_compress() fails.

* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call

jpeg_abort() which works on both compression and decompression objects.

This will return the object to an idle state, releasing any working memory.

jpeg_abort() is allowed at any time after successful object creation.

Note that cleaning up the data destination, if required, is your

responsibility; neither of these routines will call term_destination().

(See "Compressed data handling", below, for more about that.)

jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG

object that has reported an error by calling error_exit (see "Error handling"

for more info). The internal state of such an object is likely to be out of

whack. Either of these two routines will return the object to a known state.

Decompression details

---------------------

Here we revisit the JPEG decompression outline given in the overview.

1. Allocate and initialize a JPEG decompression object.

This is just like initialization for compression, as discussed above,

except that the object is a "struct jpeg_decompress_struct" and you

call jpeg_create_decompress(). Error handling is exactly the same.

Typical code:

struct jpeg_decompress_struct cinfo;

struct jpeg_error_mgr jerr;

...

cinfo.err = jpeg_std_error(&jerr);

jpeg_create_decompress(&cinfo);

(Both here and in the IJG code, we usually use variable name "cinfo" for

both compression and decompression objects.)

2. Specify the source of the compressed data (eg, a file).

As previously mentioned, the JPEG library reads compressed data from a "data

source" module. The library includes one data source module which knows how

to read from a stdio stream. You can use your own source module if you want

to do something else, as discussed later.

If you use the standard source module, you must open the source stdio stream

beforehand. Typical code for this step looks like:

FILE * infile;

...

if ((infile = fopen(filename, "rb")) == NULL) {

fprintf(stderr, "can't open %s\n", filename);

exit(1);

}

jpeg_stdio_src(&cinfo, infile);

where the last line invokes the standard source module.

WARNING: it is critical that the binary compressed data be read unchanged.

On non-Unix systems the stdio library may perform newline translation or

otherwise corrupt binary data. To suppress this behavior, you may need to use

a "b" option to fopen (as shown above), or use setmode() or another routine to

put the stdio stream in binary mode. See cjpeg.c and djpeg.c for code that

has been found to work on many systems.

You may not change the data source between calling jpeg_read_header() and

jpeg_finish_decompress(). If you wish to read a series of JPEG images from

a single source file, you should repeat the jpeg_read_header() to

jpeg_finish_decompress() sequence without reinitializing either the JPEG

object or the data source module; this prevents buffered input data from

being discarded.

3. Call jpeg_read_header() to obtain image info.

Typical code for this step is just

jpeg_read_header(&cinfo, TRUE);

This will read the source datastream header markers, up to the beginning

of the compressed data proper. On return, the image dimensions and other

info have been stored in the JPEG object. The application may wish to

consult this information before selecting decompression parameters.

More complex code is necessary if

* A suspending data source is used --- in that case jpeg_read_header()

may return before it has read all the header data. See "I/O suspension",

below. The normal stdio source manager will NOT cause this to happen.

* Abbreviated JPEG files are to be processed --- see the section on

abbreviated datastreams. Standard applications that deal only in

interchange JPEG files need not be concerned with this case either.

It is permissible to stop at this point if you just wanted to find out the

image dimensions and other header info for a JPEG file. In that case,

call jpeg_destroy() when you are done with the JPEG object, or call

jpeg_abort() to return it to an idle state before selecting a new data

source and reading another header.

4. Set parameters for decompression.

jpeg_read_header() sets appropriate default decompression parameters based on

the properties of the image (in particular, its colorspace). However, you

may well want to alter these defaults before beginning the decompression.

For example, the default is to produce full color output from a color file.

If you want colormapped output you must ask for it. Other options allow the

returned image to be scaled and allow various speed/quality tradeoffs to be

selected. "Decompression parameter selection", below, gives details.

If the defaults are appropriate, nothing need be done at this step.

Note that all default values are set by each call to jpeg_read_header().

If you reuse a decompression object, you cannot expect your parameter

settings to be preserved across cycles, as you can for compression.

You must set desired parameter values each time.

5. jpeg_start_decompress(...);

Once the parameter values are satisfactory, call jpeg_start_decompress() to

begin decompression. This will initialize internal state, allocate working

memory, and prepare for returning data.

Typical code is just

jpeg_start_decompress(&cinfo);

If you have requested a multi-pass operating mode, such as 2-pass color

quantization, jpeg_start_decompress() will do everything needed before data

output can begin. In this case jpeg_start_decompress() may take quite a while

to complete. With a single-scan (non progressive) JPEG file and default

decompression parameters, this will not happen; jpeg_start_decompress() will

return quickly.

After this call, the final output image dimensions, including any requested

scaling, are available in the JPEG object; so is the selected colormap, if

colormapped output has been requested. Useful fields include

output_width image width and height, as scaled

output_height

out_color_components # of color components in out_color_space

output_components # of color components returned per pixel

colormap the selected colormap, if any

actual_number_of_colors number of entries in colormap

output_components is 1 (a colormap index) when quantizing colors; otherwise it

equals out_color_components. It is the number of JSAMPLE values that will be

emitted per pixel in the output arrays.

Typically you will need to allocate data buffers to hold the incoming image.

You will need output_width * output_components JSAMPLEs per scanline in your

output buffer, and a total of output_height scanlines will be returned.

Note: if you are using the JPEG library's internal memory manager to allocate

data buffers (as djpeg does), then the manager's protocol requires that you

request large buffers *before* calling jpeg_start_decompress(). This is a

little tricky since the output_XXX fields are not normally valid then. You

can make them valid by calling jpeg_calc_output_dimensions() after setting the

relevant parameters (scaling, output color space, and quantization flag).

6. while (scan lines remain to be read)

jpeg_read_scanlines(...);

Now you can read the decompressed image data by calling jpeg_read_scanlines()

one or more times. At each call, you pass in the maximum number of scanlines

to be read (ie, the height of your working buffer); jpeg_read_scanlines()

will return up to that many lines. The return value is the number of lines

actually read. The format of the returned data is discussed under "Data

formats", above. Don't forget that grayscale and color JPEGs will return

different data formats!

Image data is returned in top-to-bottom scanline order. If you must write

out the image in bottom-to-top order, you can use the JPEG library's virtual

array mechanism to invert the data efficiently. Examples of this can be

found in the sample application djpeg.

The library maintains a count of the number of scanlines returned so far

in the output_scanline field of the JPEG object. Usually you can just use

this variable as the loop counter, so that the loop test looks like

"while (cinfo.output_scanline < cinfo.output_height)". (Note that the test

should NOT be against image_height, unless you never use scaling. The

image_height field is the height of the original unscaled image.)

The return value always equals the change in the value of output_scanline.

If you don't use a suspending data source, it is safe to assume that

jpeg_read_scanlines() reads at least one scanline per call, until the

bottom of the image has been reached.

If you use a buffer larger than one scanline, it is NOT safe to assume that

jpeg_read_scanlines() fills it. (The current implementation returns only a

few scanlines per call, no matter how large a buffer you pass.) So you must

always provide a loop that calls jpeg_read_scanlines() repeatedly until the

whole image has been read.

7. jpeg_finish_decompress(...);

After all the image data has been read, call jpeg_finish_decompress() to

complete the decompression cycle. This causes working memory associated

with the JPEG object to be released.

Typical code:

jpeg_finish_decompress(&cinfo);

If using the stdio source manager, don't forget to close the source stdio

stream if necessary.

It is an error to call jpeg_finish_decompress() before reading the correct

total number of scanlines. If you wish to abort decompression, call

jpeg_abort() as discussed below.

After completing a decompression cycle, you may dispose of the JPEG object as

discussed next, or you may use it to decompress another image. In that case

return to step 2 or 3 as appropriate. If you do not change the source

manager, the next image will be read from the same source.

8. Release the JPEG decompression object.

When you are done with a JPEG decompression object, destroy it by calling

jpeg_destroy_decompress() or jpeg_destroy(). The previous discussion of

destroying compression objects applies here too.

Typical code:

jpeg_destroy_decompress(&cinfo);

9. Aborting.

You can abort a decompression cycle by calling jpeg_destroy_decompress() or

jpeg_destroy() if you don't need the JPEG object any more, or

jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object.

The previous discussion of aborting compression cycles applies here too.

Mechanics of usage: include files, linking, etc

-----------------------------------------------

Applications using the JPEG library should include the header file jpeglib.h

to obtain declarations of data types and routines. Before including

jpeglib.h, include system headers that define at least the typedefs FILE and

size_t. On ANSI-conforming systems, including <stdio.h> is sufficient; on

older Unix systems, you may need <sys/types.h> to define size_t.

If the application needs to refer to individual JPEG library error codes, also

include jerror.h to define those symbols.

jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h. If you are

installing the JPEG header files in a system directory, you will want to

install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h.

The most convenient way to include the JPEG code into your executable program

is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix

machines) and reference it at your link step. If you use only half of the

library (only compression or only decompression), only that much code will be

included from the library, unless your linker is hopelessly brain-damaged.

The supplied makefiles build libjpeg.a automatically (see install.txt).

While you can build the JPEG library as a shared library if the whim strikes

you, we don't really recommend it. The trouble with shared libraries is that

at some point you'll probably try to substitute a new version of the library

without recompiling the calling applications. That generally doesn't work

because the parameter struct declarations usually change with each new

version. In other words, the library's API is *not* guaranteed binary

compatible across versions; we only try to ensure source-code compatibility.

(In hindsight, it might have been smarter to hide the parameter structs from

applications and introduce a ton of access functions instead. Too late now,

however.)

On some systems your application may need to set up a signal handler to ensure

that temporary files are deleted if the program is interrupted. This is most

critical if you are on MS-DOS and use the jmemdos.c memory manager back end;

it will try to grab extended memory for temp files, and that space will NOT be

freed automatically. See cjpeg.c or djpeg.c for an example signal handler.

It may be worth pointing out that the core JPEG library does not actually

require the stdio library: only the default source/destination managers and

error handler need it. You can use the library in a stdio-less environment

if you replace those modules and use jmemnobs.c (or another memory manager of

your own devising). More info about the minimum system library requirements

may be found in jinclude.h.

ADVANCED FEATURES

=================

Compression parameter selection

-------------------------------

This section describes all the optional parameters you can set for JPEG

compression, as well as the "helper" routines provided to assist in this

task. Proper setting of some parameters requires detailed understanding

of the JPEG standard; if you don't know what a parameter is for, it's best

not to mess with it! See REFERENCES in the README file for pointers to

more info about JPEG.

It's a good idea to call jpeg_set_defaults() first, even if you plan to set

all the parameters; that way your code is more likely to work with future JPEG

libraries that have additional parameters. For the same reason, we recommend

you use a helper routine where one is provided, in preference to twiddling

cinfo fields directly.

The helper routines are:

jpeg_set_defaults (j_compress_ptr cinfo)

This routine sets all JPEG parameters to reasonable defaults, using

only the input image's color space (field in_color_space, which must

already be set in cinfo). Many applications will only need to use

this routine and perhaps jpeg_set_quality().

jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)

Sets the JPEG file's colorspace (field jpeg_color_space) as specified,

and sets other color-space-dependent parameters appropriately. See

"Special color spaces", below, before using this. A large number of

parameters, including all per-component parameters, are set by this

routine; if you want to twiddle individual parameters you should call

jpeg_set_colorspace() before rather than after.

jpeg_default_colorspace (j_compress_ptr cinfo)

Selects an appropriate JPEG colorspace based on cinfo->in_color_space,

and calls jpeg_set_colorspace(). This is actually a subroutine of

jpeg_set_defaults(). It's broken out in case you want to change

just the colorspace-dependent JPEG parameters.

jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)

Constructs JPEG quantization tables appropriate for the indicated

quality setting. The quality value is expressed on the 0..100 scale

recommended by IJG (cjpeg's "-quality" switch uses this routine).

Note that the exact mapping from quality values to tables may change

in future IJG releases as more is learned about DCT quantization.

If the force_baseline parameter is TRUE, then the quantization table

entries are constrained to the range 1..255 for full JPEG baseline

compatibility. In the current implementation, this only makes a

difference for quality settings below 25, and it effectively prevents

very small/low quality files from being generated. The IJG decoder

is capable of reading the non-baseline files generated at low quality

settings when force_baseline is FALSE, but other decoders may not be.

jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,

boolean force_baseline)

Same as jpeg_set_quality() except that the generated tables are the

sample tables given in the JPEC spec section K.1, multiplied by the

specified scale factor (which is expressed as a percentage; thus

scale_factor = 100 reproduces the spec's tables). Note that larger

scale factors give lower quality. This entry point is useful for

conforming to the Adobe PostScript DCT conventions, but we do not

recommend linear scaling as a user-visible quality scale otherwise.

force_baseline again constrains the computed table entries to 1..255.

int jpeg_quality_scaling (int quality)

Converts a value on the IJG-recommended quality scale to a linear

scaling percentage. Note that this routine may change or go away

in future releases --- IJG may choose to adopt a scaling method that

can't be expressed as a simple scalar multiplier, in which case the

premise of this routine collapses. Caveat user.

jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)

Set default quantization tables with linear q_scale_factor[] values

(see below).

jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,

const unsigned int *basic_table,

int scale_factor, boolean force_baseline)

Allows an arbitrary quantization table to be created. which_tbl

indicates which table slot to fill. basic_table points to an array

of 64 unsigned ints given in normal array order. These values are

multiplied by scale_factor/100 and then clamped to the range 1..65535

(or to 1..255 if force_baseline is TRUE).

CAUTION: prior to library version 6a, jpeg_add_quant_table expected

the basic table to be given in JPEG zigzag order. If you need to

write code that works with either older or newer versions of this

routine, you must check the library version number. Something like

"#if JPEG_LIB_VERSION >= 61" is the right test.

jpeg_simple_progression (j_compress_ptr cinfo)

Generates a default scan script for writing a progressive-JPEG file.

This is the recommended method of creating a progressive file,

unless you want to make a custom scan sequence. You must ensure that

the JPEG color space is set correctly before calling this routine.

Compression parameters (cinfo fields) include:

boolean arith_code

If TRUE, use arithmetic coding.

If FALSE, use Huffman coding.

int block_size

Set DCT block size. All N from 1 to 16 are possible.

Default is 8 (baseline format).

Larger values produce higher compression,

smaller values produce higher quality.

An exact DCT stage is possible with 1 or 2.

With the default quality of 75 and default Luminance qtable

the DCT+Quantization stage is lossless for value 1.

Note that values other than 8 require a SmartScale capable decoder,

introduced with IJG JPEG 8. Setting the block_size parameter for

compression works with version 8c and later.

J_DCT_METHOD dct_method

Selects the algorithm used for the DCT step. Choices are:

JDCT_ISLOW: slow but accurate integer algorithm

JDCT_IFAST: faster, less accurate integer method

JDCT_FLOAT: floating-point method

JDCT_DEFAULT: default method (normally JDCT_ISLOW)

JDCT_FASTEST: fastest method (normally JDCT_IFAST)

The FLOAT method is very slightly more accurate than the ISLOW method,

but may give different results on different machines due to varying

roundoff behavior. The integer methods should give the same results

on all machines. On machines with sufficiently fast FP hardware, the

floating-point method may also be the fastest. The IFAST method is

considerably less accurate than the other two; its use is not

recommended if high quality is a concern. JDCT_DEFAULT and

JDCT_FASTEST are macros configurable by each installation.

unsigned int scale_num, scale_denom

Scale the image by the fraction scale_num/scale_denom. Default is

1/1, or no scaling. Currently, the supported scaling ratios are

M/N with all N from 1 to 16, where M is the destination DCT size,

which is 8 by default (see block_size parameter above).

(The library design allows for arbitrary scaling ratios but this

is not likely to be implemented any time soon.)

J_COLOR_SPACE jpeg_color_space

int num_components

The JPEG color space and corresponding number of components; see

"Special color spaces", below, for more info. We recommend using

jpeg_set_colorspace() if you want to change these.

J_COLOR_TRANSFORM color_transform

Internal color transform identifier, writes LSE marker if nonzero

(requires decoder with inverse color transform support, introduced

with IJG JPEG 9).

Two values are currently possible: JCT_NONE and JCT_SUBTRACT_GREEN.

Set this value for lossless RGB application *before* calling

jpeg_set_colorspace(), because entropy table assignment in

jpeg_set_colorspace() depends on color_transform.

boolean optimize_coding

TRUE causes the compressor to compute optimal Huffman coding tables

for the image. This requires an extra pass over the data and

therefore costs a good deal of space and time. The default is

FALSE, which tells the compressor to use the supplied or default

Huffman tables. In most cases optimal tables save only a few percent

of file size compared to the default tables. Note that when this is

TRUE, you need not supply Huffman tables at all, and any you do

supply will be overwritten.

unsigned int restart_interval

int restart_in_rows

To emit restart markers in the JPEG file, set one of these nonzero.

Set restart_interval to specify the exact interval in MCU blocks.

Set restart_in_rows to specify the interval in MCU rows. (If

restart_in_rows is not 0, then restart_interval is set after the

image width in MCUs is computed.) Defaults are zero (no restarts).

One restart marker per MCU row is often a good choice.

NOTE: the overhead of restart markers is higher in grayscale JPEG

files than in color files, and MUCH higher in progressive JPEGs.

If you use restarts, you may want to use larger intervals in those

cases.

const jpeg_scan_info * scan_info

int num_scans

By default, scan_info is NULL; this causes the compressor to write a

single-scan sequential JPEG file. If not NULL, scan_info points to

an array of scan definition records of length num_scans. The

compressor will then write a JPEG file having one scan for each scan

definition record. This is used to generate noninterleaved or

progressive JPEG files. The library checks that the scan array

defines a valid JPEG scan sequence. (jpeg_simple_progression creates

a suitable scan definition array for progressive JPEG.) This is

discussed further under "Progressive JPEG support".

boolean do_fancy_downsampling

If TRUE, use direct DCT scaling with DCT size > 8 for downsampling

of chroma components.

If FALSE, use only DCT size <= 8 and simple separate downsampling.

Default is TRUE.

For better image stability in multiple generation compression cycles

it is preferable that this value matches the corresponding

do_fancy_upsampling value in decompression.

int smoothing_factor

If non-zero, the input image is smoothed; the value should be 1 for

minimal smoothing to 100 for maximum smoothing. Consult jcsample.c

for details of the smoothing algorithm. The default is zero.

boolean write_JFIF_header

If TRUE, a JFIF APP0 marker is emitted. jpeg_set_defaults() and

jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space

(ie, YCbCr or grayscale) is selected, otherwise FALSE.

UINT8 JFIF_major_version

UINT8 JFIF_minor_version

The version number to be written into the JFIF marker.

jpeg_set_defaults() initializes the version to 1.01 (major=minor=1).

You should set it to 1.02 (major=1, minor=2) if you plan to write

any JFIF 1.02 extension markers.

UINT8 density_unit

UINT16 X_density

UINT16 Y_density

The resolution information to be written into the JFIF marker;

not used otherwise. density_unit may be 0 for unknown,

1 for dots/inch, or 2 for dots/cm. The default values are 0,1,1