From edc158894c6dd7dbd4a0e8c95e3cdd52ff521906 Mon Sep 17 00:00:00 2001 From: Ozkan Sezer Date: Sat, 3 Aug 2019 12:49:50 +0300 Subject: [PATCH] remove test/aclocal.m4 --- .hgignore | 2 + test/aclocal.m4 | 359 ------------------------------------------------ 2 files changed, 2 insertions(+), 359 deletions(-) delete mode 100644 test/aclocal.m4 diff --git a/.hgignore b/.hgignore index d839b714e83d2..a0e882426f180 100644 --- a/.hgignore +++ b/.hgignore @@ -59,6 +59,8 @@ VisualC/visualtest/testsprite2_sample.parameters android-project/local.properties sdl.pc + +test/aclocal.m4 test/autom4te* test/config.cache test/config.log diff --git a/test/aclocal.m4 b/test/aclocal.m4 deleted file mode 100644 index ead69e5149c14..0000000000000 --- a/test/aclocal.m4 +++ /dev/null @@ -1,359 +0,0 @@ -# Configure paths for SDL -# Sam Lantinga 9/21/99 -# stolen from Manish Singh -# stolen back from Frank Belew -# stolen from Manish Singh -# Shamelessly stolen from Owen Taylor - -# serial 1 - -dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) -dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS -dnl -AC_DEFUN([AM_PATH_SDL2], -[dnl -dnl Get the cflags and libraries from the sdl2-config script -dnl -AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)], - sdl_prefix="$withval", sdl_prefix="") -AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)], - sdl_exec_prefix="$withval", sdl_exec_prefix="") -AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program], - , enable_sdltest=yes) - - min_sdl_version=ifelse([$1], ,0.9.0,$1) - - if test "x$sdl_prefix$sdl_exec_prefix" = x ; then - PKG_CHECK_MODULES([SDL], [sdl2 >= $min_sdl_version], - [sdl_pc=yes], - [sdl_pc=no]) - else - sdl_pc=no - if test x$sdl_exec_prefix != x ; then - sdl_config_args="$sdl_config_args --exec-prefix=$sdl_exec_prefix" - if test x${SDL_CONFIG+set} != xset ; then - SDL_CONFIG=$sdl_exec_prefix/bin/sdl2-config - fi - fi - if test x$sdl_prefix != x ; then - sdl_config_args="$sdl_config_args --prefix=$sdl_prefix" - if test x${SDL_CONFIG+set} != xset ; then - SDL_CONFIG=$sdl_prefix/bin/sdl2-config - fi - fi - fi - - if test "x$sdl_pc" = xyes ; then - no_sdl="" - SDL_CONFIG="pkg-config sdl2" - else - as_save_PATH="$PATH" - if test "x$prefix" != xNONE && test "$cross_compiling" != yes; then - PATH="$prefix/bin:$prefix/usr/bin:$PATH" - fi - AC_PATH_PROG(SDL_CONFIG, sdl2-config, no, [$PATH]) - PATH="$as_save_PATH" - AC_MSG_CHECKING(for SDL - version >= $min_sdl_version) - no_sdl="" - - if test "$SDL_CONFIG" = "no" ; then - no_sdl=yes - else - SDL_CFLAGS=`$SDL_CONFIG $sdl_config_args --cflags` - SDL_LIBS=`$SDL_CONFIG $sdl_config_args --libs` - - sdl_major_version=`$SDL_CONFIG $sdl_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` - sdl_minor_version=`$SDL_CONFIG $sdl_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` - sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` - if test "x$enable_sdltest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_CXXFLAGS="$CXXFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $SDL_CFLAGS" - CXXFLAGS="$CXXFLAGS $SDL_CFLAGS" - LIBS="$LIBS $SDL_LIBS" -dnl -dnl Now check if the installed SDL is sufficiently new. (Also sanity -dnl checks the results of sdl2-config to some extent -dnl - rm -f conf.sdltest - AC_TRY_RUN([ -#include -#include -#include -#include "SDL.h" - -char* -my_strdup (char *str) -{ - char *new_str; - - if (str) - { - new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); - strcpy (new_str, str); - } - else - new_str = NULL; - - return new_str; -} - -int main (int argc, char *argv[]) -{ - int major, minor, micro; - char *tmp_version; - - /* This hangs on some systems (?) - system ("touch conf.sdltest"); - */ - { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); } - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = my_strdup("$min_sdl_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_sdl_version"); - exit(1); - } - - if (($sdl_major_version > major) || - (($sdl_major_version == major) && ($sdl_minor_version > minor)) || - (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** 'sdl2-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version); - printf("*** of SDL required is %d.%d.%d. If sdl2-config is correct, then it is\n", major, minor, micro); - printf("*** best to upgrade to the required version.\n"); - printf("*** If sdl2-config was wrong, set the environment variable SDL_CONFIG\n"); - printf("*** to point to the correct copy of sdl2-config, and remove the file\n"); - printf("*** config.cache before re-running configure\n"); - return 1; - } -} - -],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - CXXFLAGS="$ac_save_CXXFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - if test "x$no_sdl" = x ; then - AC_MSG_RESULT(yes) - else - AC_MSG_RESULT(no) - fi - fi - if test "x$no_sdl" = x ; then - ifelse([$2], , :, [$2]) - else - if test "$SDL_CONFIG" = "no" ; then - echo "*** The sdl2-config script installed by SDL could not be found" - echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the SDL_CONFIG environment variable to the" - echo "*** full path to sdl2-config." - else - if test -f conf.sdltest ; then - : - else - echo "*** Could not run SDL test program, checking why..." - CFLAGS="$CFLAGS $SDL_CFLAGS" - CXXFLAGS="$CXXFLAGS $SDL_CFLAGS" - LIBS="$LIBS $SDL_LIBS" - AC_TRY_LINK([ -#include -#include "SDL.h" - -int main(int argc, char *argv[]) -{ return 0; } -#undef main -#define main K_and_R_C_main -], [ return 0; ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding SDL or finding the wrong" - echo "*** version of SDL. If it is not finding SDL, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means SDL was incorrectly installed" - echo "*** or that you have moved SDL since it was installed. In the latter case, you" - echo "*** may want to edit the sdl2-config script: $SDL_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - CXXFLAGS="$ac_save_CXXFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - SDL_CFLAGS="" - SDL_LIBS="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(SDL_CFLAGS) - AC_SUBST(SDL_LIBS) - rm -f conf.sdltest -]) -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 1 (pkg-config-0.24) -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) -AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) -AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi -fi[]dnl -])# PKG_PROG_PKG_CONFIG - -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -# only at the first occurence in configure.ac, so if the first place -# it's called might be skipped (such as if it is within an "if", you -# have to call PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_default([$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])# _PKG_CONFIG - -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED - - -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - m4_default([$4], [AC_MSG_ERROR( -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT])dnl - ]) -elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) - m4_default([$4], [AC_MSG_FAILURE( -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see .])dnl - ]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - $3 -fi[]dnl -])# PKG_CHECK_MODULES