# Local macros for the SDL configure.in script dnl Function to link an architecture specific file dnl LINK_ARCH_SRC(source_dir, arch, source_file) AC_DEFUN([COPY_ARCH_SRC], [ old="$srcdir/$1/$2/$3" new="$1/$3" if test ! -d $1; then echo "Creating directory $1" mkdir -p $1 fi echo "Copying $old -> $new" cat >$new <<__EOF__ /* WARNING: This file was automatically generated! * Original: $old */ __EOF__ cat >>$new <$old ]) ############################################################################## dnl Configure Paths for Alsa dnl Some modifications by Richard Boulton dnl Christopher Lansdown dnl Jaroslav Kysela dnl Last modification: alsa.m4,v 1.23 2004/01/16 18:14:22 tiwai Exp dnl AM_PATH_ALSA([MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for libasound, and define ALSA_CFLAGS and ALSA_LIBS as appropriate. dnl enables arguments --with-alsa-prefix= dnl --with-alsa-enc-prefix= dnl --disable-alsatest dnl dnl For backwards compatibility, if ACTION_IF_NOT_FOUND is not specified, dnl and the alsa libraries are not found, a fatal AC_MSG_ERROR() will result. dnl AC_DEFUN([AM_PATH_ALSA], [dnl Save the original CFLAGS, LDFLAGS, and LIBS alsa_save_CFLAGS="$CFLAGS" alsa_save_LDFLAGS="$LDFLAGS" alsa_save_LIBS="$LIBS" alsa_found=yes dnl dnl Get the cflags and libraries for alsa dnl AC_ARG_WITH(alsa-prefix, [ --with-alsa-prefix=PFX Prefix where Alsa library is installed(optional)], [alsa_prefix="$withval"], [alsa_prefix=""]) AC_ARG_WITH(alsa-inc-prefix, [ --with-alsa-inc-prefix=PFX Prefix where include libraries are (optional)], [alsa_inc_prefix="$withval"], [alsa_inc_prefix=""]) dnl FIXME: this is not yet implemented AC_ARG_ENABLE(alsatest, [ --disable-alsatest Do not try to compile and run a test Alsa program], [enable_alsatest="$enableval"], [enable_alsatest=yes]) dnl Add any special include directories AC_MSG_CHECKING(for ALSA CFLAGS) if test "$alsa_inc_prefix" != "" ; then ALSA_CFLAGS="$ALSA_CFLAGS -I$alsa_inc_prefix" CFLAGS="$CFLAGS -I$alsa_inc_prefix" fi AC_MSG_RESULT($ALSA_CFLAGS) dnl add any special lib dirs AC_MSG_CHECKING(for ALSA LDFLAGS) if test "$alsa_prefix" != "" ; then ALSA_LIBS="$ALSA_LIBS -L$alsa_prefix" LDFLAGS="$LDFLAGS $ALSA_LIBS" fi dnl add the alsa library ALSA_LIBS="$ALSA_LIBS -lasound -lm -ldl -lpthread" LIBS=`echo $LIBS | sed 's/-lm//'` LIBS=`echo $LIBS | sed 's/-ldl//'` LIBS=`echo $LIBS | sed 's/-lpthread//'` LIBS=`echo $LIBS | sed 's/ //'` LIBS="$ALSA_LIBS $LIBS" AC_MSG_RESULT($ALSA_LIBS) dnl Check for a working version of libasound that is of the right version. min_alsa_version=ifelse([$1], ,0.1.1,$1) AC_MSG_CHECKING(for libasound headers version >= $min_alsa_version) no_alsa="" alsa_min_major_version=`echo $min_alsa_version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` alsa_min_minor_version=`echo $min_alsa_version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` alsa_min_micro_version=`echo $min_alsa_version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` AC_LANG_SAVE AC_LANG_C AC_TRY_COMPILE([ #include ], [ /* ensure backward compatibility */ #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR) #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR #endif #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR) #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR #endif #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR) #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR #endif # if(SND_LIB_MAJOR > $alsa_min_major_version) exit(0); # else # if(SND_LIB_MAJOR < $alsa_min_major_version) # error not present # endif # if(SND_LIB_MINOR > $alsa_min_minor_version) exit(0); # else # if(SND_LIB_MINOR < $alsa_min_minor_version) # error not present # endif # if(SND_LIB_SUBMINOR < $alsa_min_micro_version) # error not present # endif # endif # endif exit(0); ], [AC_MSG_RESULT(found.)], [AC_MSG_RESULT(not present.) ifelse([$3], , [AC_MSG_ERROR(Sufficiently new version of libasound not found.)]) alsa_found=no] ) AC_LANG_RESTORE dnl Now that we know that we have the right version, let's see if we have the library and not just the headers. if test "x$enable_alsatest" = "xyes"; then AC_CHECK_LIB([asound], [snd_ctl_open],, [ifelse([$3], , [AC_MSG_ERROR(No linkable libasound was found.)]) alsa_found=no] ) fi if test "x$alsa_found" = "xyes" ; then ifelse([$2], , :, [$2]) LIBS=`echo $LIBS | sed 's/-lasound//g'` LIBS=`echo $LIBS | sed 's/ //'` LIBS="-lasound $LIBS" fi if test "x$alsa_found" = "xno" ; then ifelse([$3], , :, [$3]) CFLAGS="$alsa_save_CFLAGS" LDFLAGS="$alsa_save_LDFLAGS" LIBS="$alsa_save_LIBS" ALSA_CFLAGS="" ALSA_LIBS="" fi dnl That should be it. Now just export out symbols: AC_SUBST(ALSA_CFLAGS) AC_SUBST(ALSA_LIBS) ]) ############################################################################## # # --- esd.m4 --- # # Configure paths for ESD # Manish Singh 98-9-30 # stolen back from Frank Belew # stolen from Manish Singh # Shamelessly stolen from Owen Taylor dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS dnl AC_DEFUN([AM_PATH_ESD], [dnl dnl Get the cflags and libraries from the esd-config script dnl AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)], esd_prefix="$withval", esd_prefix="") AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)], esd_exec_prefix="$withval", esd_exec_prefix="") AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program], , enable_esdtest=yes) if test x$esd_exec_prefix != x ; then esd_args="$esd_args --exec-prefix=$esd_exec_prefix" if test x${ESD_CONFIG+set} != xset ; then ESD_CONFIG=$esd_exec_prefix/bin/esd-config fi fi if test x$esd_prefix != x ; then esd_args="$esd_args --prefix=$esd_prefix" if test x${ESD_CONFIG+set} != xset ; then ESD_CONFIG=$esd_prefix/bin/esd-config fi fi AC_PATH_PROG(ESD_CONFIG, esd-config, no) min_esd_version=ifelse([$1], ,0.2.7,$1) AC_MSG_CHECKING(for ESD - version >= $min_esd_version) no_esd="" if test "$ESD_CONFIG" = "no" ; then no_esd=yes else ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags` ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs` esd_major_version=`$ESD_CONFIG $esd_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` esd_minor_version=`$ESD_CONFIG $esd_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_esdtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $ESD_CFLAGS" LIBS="$LIBS $ESD_LIBS" dnl dnl Now check if the installed ESD is sufficiently new. (Also sanity dnl checks the results of esd-config to some extent dnl rm -f conf.esdtest AC_TRY_RUN([ #include #include #include #include char* my_strdup (char *str) { char *new_str; if (str) { new_str = malloc ((strlen (str) + 1) * sizeof(char)); strcpy (new_str, str); } else new_str = NULL; return new_str; } int main () { int major, minor, micro; char *tmp_version; system ("touch conf.esdtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = my_strdup("$min_esd_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_esd_version"); exit(1); } if (($esd_major_version > major) || (($esd_major_version == major) && ($esd_minor_version > minor)) || (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro))) { return 0; } else { printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version); printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n"); printf("*** to point to the correct copy of esd-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_esd" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$ESD_CONFIG" = "no" ; then echo "*** The esd-config script installed by ESD could not be found" echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the ESD_CONFIG environment variable to the" echo "*** full path to esd-config." else if test -f conf.esdtest ; then : else echo "*** Could not run ESD test program, checking why..." CFLAGS="$CFLAGS $ESD_CFLAGS" LIBS="$LIBS $ESD_LIBS" AC_TRY_LINK([ #include #include ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding ESD or finding the wrong" echo "*** version of ESD. If it is not finding ESD, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means ESD was incorrectly installed" echo "*** or that you have moved ESD since it was installed. In the latter case, you" echo "*** may want to edit the esd-config script: $ESD_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi ESD_CFLAGS="" ESD_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(ESD_CFLAGS) AC_SUBST(ESD_LIBS) rm -f conf.esdtest ]) ############################################################################## # Based on libtool-1.5.8 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- ## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 ## Free Software Foundation, Inc. ## Originally by Gordon Matzigkeit , 1996 ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## As a special exception to the GNU General Public License, if you ## distribute this file as part of a program that contains a ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. # serial 47 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) # ----------------------------------------------------------- # If this macro is not defined by Autoconf, define it here. m4_ifdef([AC_PROVIDE_IFELSE], [], [m4_define([AC_PROVIDE_IFELSE], [m4_ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_PROG_LIBTOOL # --------------- AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl And a similar setup for Fortran 77 support AC_PROVIDE_IFELSE([AC_PROG_F77], [AC_LIBTOOL_F77], [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) ])])# AC_PROG_LIBTOOL # _AC_PROG_LIBTOOL # ---------------- AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Prevent multiple expansion define([AC_PROG_LIBTOOL], []) ])# _AC_PROG_LIBTOOL # AC_LIBTOOL_SETUP # ---------------- AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.50)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl AC_LIBTOOL_SYS_MAX_CMD_LEN AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE AC_LIBTOOL_OBJDIR AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_PROG_ECHO_BACKSLASH case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] # Same as above, but do not quote variable references. [double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" AC_CHECK_TOOL(AR, ar, false) AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$SED" && SED=sed test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ;; *) old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], enable_win32_dll=yes, enable_win32_dll=no) AC_ARG_ENABLE([libtool-lock], [AC_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes AC_ARG_WITH([pic], [AC_HELP_STRING([--with-pic], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [pic_mode="$withval"], [pic_mode=default]) test -z "$pic_mode" && pic_mode=default # Use C for the default configuration in the libtool script tagname= AC_LIBTOOL_LANG_C_CONFIG _LT_AC_TAGCONFIG ])# AC_LIBTOOL_SETUP # _LT_AC_SYS_COMPILER # ------------------- AC_DEFUN([_LT_AC_SYS_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_AC_SYS_COMPILER # _LT_AC_SYS_LIBPATH_AIX # ---------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], [AC_LINK_IFELSE(AC_LANG_PROGRAM,[ aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'`; fi],[]) if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ])# _LT_AC_SYS_LIBPATH_AIX # _LT_AC_SHELL_INIT(ARG) # ---------------------- AC_DEFUN([_LT_AC_SHELL_INIT], [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], [AC_DIVERT_PUSH(NOTICE)]) $1 AC_DIVERT_POP ])# _LT_AC_SHELL_INIT # _LT_AC_PROG_ECHO_BACKSLASH # -------------------------- # Add some code to the start of the generated configure script which # will find an echo command which doesn't interpret backslashes. AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], [_LT_AC_SHELL_INIT([ # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ;; esac echo=${ECHO-echo} if test "X[$]1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X[$]1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi if test "X[$]1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if (echo_test_string="`eval $cmd`") 2>/dev/null && echo_test_string="`eval $cmd`" && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL [$]0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL [$]0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "[$]0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" fi AC_SUBST(ECHO) ])])# _LT_AC_PROG_ECHO_BACKSLASH # _LT_AC_LOCK # ----------- AC_DEFUN([_LT_AC_LOCK], [AC_ARG_ENABLE([libtool-lock], [AC_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case "`/usr/bin/file conftest.o`" in *32-bit*) case $host in x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; ]) esac need_locks="$enable_libtool_lock" ])# _LT_AC_LOCK # AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED]) AC_CACHE_CHECK([$1], [$2], [$2=no ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) printf "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test ! -s conftest.err; then $2=yes fi fi $rm conftest* ]) if test x"[$]$2" = xyes; then ifelse([$5], , :, [$5]) else ifelse([$6], , :, [$6]) fi ])# AC_LIBTOOL_COMPILER_OPTION # AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ------------------------------------------------------------ # Check whether the given compiler option works AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" printf "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD else $2=yes fi fi $rm conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then ifelse([$4], , :, [$4]) else ifelse([$5], , :, [$5]) fi ])# AC_LIBTOOL_LINKER_OPTION # AC_LIBTOOL_SYS_MAX_CMD_LEN # -------------------------- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [# find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* ) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for *BSD fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ;; *) # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ = "XX$teststring") >/dev/null 2>&1 && new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi ])# AC_LIBTOOL_SYS_MAX_CMD_LEN # _LT_AC_CHECK_DLFCN # -------------------- AC_DEFUN([_LT_AC_CHECK_DLFCN], [AC_CHECK_HEADERS(dlfcn.h)dnl ])# _LT_AC_CHECK_DLFCN # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ------------------------------------------------------------------ AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_unknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_AC_TRY_DLOPEN_SELF # AC_LIBTOOL_DLOPEN_SELF # ------------------- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then LDFLAGS="$LDFLAGS $link_static_flag" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi ])# AC_LIBTOOL_DLOPEN_SELF # AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) # --------------------------------- # Check to see if options -c and -o are simultaneously supported by compiler AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out printf "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test ! -s out/conftest.err; then _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* ]) ])# AC_LIBTOOL_PROG_CC_C_O # AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) # ----------------------------------------- # Check to see if we can do hard links to lock some files if needed AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_REQUIRE([_LT_AC_LOCK])dnl hard_links="nottested" if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi ])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS # AC_LIBTOOL_OBJDIR # ----------------- AC_DEFUN([AC_LIBTOOL_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir ])# AC_LIBTOOL_OBJDIR # AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) # ---------------------------------------------- # Check hardcoding attributes. AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_AC_TAGVAR(hardcode_action, $1)= if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existant directories. if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_AC_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_AC_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_AC_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi ])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH # AC_LIBTOOL_SYS_LIB_STRIP # ------------------------ AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], [striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi ])# AC_LIBTOOL_SYS_LIB_STRIP # AC_LIBTOOL_SYS_DYNAMIC_LINKER # ----------------------------- # PORTME Fill in your ld.so characteristics AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_MSG_CHECKING([dynamic linker characteristics]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix4* | aix5*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' #soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' soname_spec='`echo ${libname} | sed -e 's/^lib//'`${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix #soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' soname_spec='`echo ${libname} | sed -e 's/^lib//'`${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` else sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' fi sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; kfreebsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='GNU ld.so' ;; freebsd*) objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; *) # from 3.2 on shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case "$host_cpu" in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; knetbsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='GNU ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; sco3.2v5*) version_type=osf soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER # _LT_AC_TAGCONFIG # ---------------- AC_DEFUN([_LT_AC_TAGCONFIG], [AC_ARG_WITH([tags], [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], [include additional configurations @<:@automatic@:>@])], [tagnames="$withval"]) if test -f "$ltmain" && test -n "$tagnames"; then if test ! -f "${ofile}"; then AC_MSG_WARN([output file `$ofile' does not exist]) fi if test -z "$LTCC"; then eval "`$SHELL ${ofile} --config | grep '^LTCC='`" if test -z "$LTCC"; then AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) else AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) fi fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for tagname in $tagnames; do IFS="$lt_save_ifs" # Check whether tagname contains only valid characters case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in "") ;; *) AC_MSG_ERROR([invalid tag name: $tagname]) ;; esac if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null then AC_MSG_ERROR([tag name \"$tagname\" already exists]) fi # Update the list of available tags. if test -n "$tagname"; then echo appending configuration tag \"$tagname\" to $ofile case $tagname in CXX) if test -n "$CXX" && test "X$CXX" != "Xno"; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" fi ;; F77) if test -n "$F77" && test "X$F77" != "Xno"; then AC_LIBTOOL_LANG_F77_CONFIG else tagname="" fi ;; GCJ) if test -n "$GCJ" && test "X$GCJ" != "Xno"; then AC_LIBTOOL_LANG_GCJ_CONFIG else tagname="" fi ;; RC) AC_LIBTOOL_LANG_RC_CONFIG ;; *) AC_MSG_ERROR([Unsupported tag name: $tagname]) ;; esac # Append the new tag name to the list of available tags. if test -n "$tagname" ; then available_tags="$available_tags $tagname" fi fi done IFS="$lt_save_ifs" # Now substitute the updated list of available tags. if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then mv "${ofile}T" "$ofile" chmod +x "$ofile" else rm -f "${ofile}T" AC_MSG_ERROR([unable to update list of available tagged configurations.]) fi fi ])# _LT_AC_TAGCONFIG # AC_LIBTOOL_DLOPEN # ----------------- # enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_DLOPEN # AC_LIBTOOL_WIN32_DLL # -------------------- # declare package support for building win32 dll's AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL # AC_ENABLE_SHARED([DEFAULT]) # --------------------------- # implement the --enable-shared flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([shared], [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]AC_ENABLE_SHARED_DEFAULT) ])# AC_ENABLE_SHARED # AC_DISABLE_SHARED # ----------------- #- set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no) ])# AC_DISABLE_SHARED # AC_ENABLE_STATIC([DEFAULT]) # --------------------------- # implement the --enable-static flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([static], [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]AC_ENABLE_STATIC_DEFAULT) ])# AC_ENABLE_STATIC # AC_DISABLE_STATIC # ----------------- # set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no) ])# AC_DISABLE_STATIC # AC_ENABLE_FAST_INSTALL([DEFAULT]) # --------------------------------- # implement the --enable-fast-install flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([fast-install], [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) ])# AC_ENABLE_FAST_INSTALL # AC_DISABLE_FAST_INSTALL # ----------------------- # set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no) ])# AC_DISABLE_FAST_INSTALL # AC_LIBTOOL_PICMODE([MODE]) # -------------------------- # implement the --with-pic flag # MODE is either `yes' or `no'. If omitted, it defaults to `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default) ])# AC_LIBTOOL_PICMODE # AC_PROG_EGREP # ------------- # This is predefined starting with Autoconf 2.54, so this conditional # definition can be removed once we require Autoconf 2.54 or later. m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], [AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 then ac_cv_prog_egrep='grep -E' else ac_cv_prog_egrep='egrep' fi]) EGREP=$ac_cv_prog_egrep AC_SUBST([EGREP]) ])]) # AC_PATH_TOOL_PREFIX # ------------------- # find a file program which can recognise shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ])# AC_PATH_TOOL_PREFIX # AC_PATH_MAGIC # ------------- # find a file program which can recognise a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# AC_PATH_MAGIC # AC_PROG_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH([gnu-ld], [AC_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no]) AC_REQUIRE([LT_AC_PROG_SED])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case "$host_cpu" in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) case $host_cpu in alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; nto-qnx*) lt_cv_deplibs_check_method=unknown ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; esac ;; sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown ])# AC_DEPLIBS_CHECK_METHOD # AC_PROG_NM # ---------- # find the pathname to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/${ac_tool_prefix}nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac esac fi done IFS="$lt_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" ])# AC_PROG_NM # AC_CHECK_LIBM # ------------- # check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac ])# AC_CHECK_LIBM # AC_LIBLTDL_CONVENIENCE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL # and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If # DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will # be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ])# AC_LIBLTDL_CONVENIENCE # AC_LIBLTDL_INSTALLABLE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl installable library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-install to the configure arguments. Note that LIBLTDL # and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If # DIRECTORY is not provided and an installed libltdl is not found, it is # assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' # and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single # quotes!). If your package is not flat and you're not using automake, # define top_builddir and top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, lt_dlinit, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" LTDLINCL= fi # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ])# AC_LIBLTDL_INSTALLABLE # AC_LIBTOOL_CXX # -------------- # enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_LT_AC_LANG_CXX]) ])# AC_LIBTOOL_CXX # _LT_AC_LANG_CXX # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX # AC_LIBTOOL_F77 # -------------- # enable support for Fortran 77 libraries AC_DEFUN([AC_LIBTOOL_F77], [AC_REQUIRE([_LT_AC_LANG_F77]) ])# AC_LIBTOOL_F77 # _LT_AC_LANG_F77 # --------------- AC_DEFUN([_LT_AC_LANG_F77], [AC_REQUIRE([AC_PROG_F77]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) ])# _LT_AC_LANG_F77 # AC_LIBTOOL_GCJ # -------------- # enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ], [AC_REQUIRE([_LT_AC_LANG_GCJ]) ])# AC_LIBTOOL_GCJ # _LT_AC_LANG_GCJ # --------------- AC_DEFUN([_LT_AC_LANG_GCJ], [AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) ])# _LT_AC_LANG_GCJ # AC_LIBTOOL_RC # -------------- # enable support for Windows resource files AC_DEFUN([AC_LIBTOOL_RC], [AC_REQUIRE([LT_AC_PROG_RC]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) ])# AC_LIBTOOL_RC # AC_LIBTOOL_LANG_C_CONFIG # ------------------------ # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) AC_DEFUN([_LT_AC_LANG_C_CONFIG], [lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;\n" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}\n' _LT_AC_SYS_COMPILER # # Check for any special shared library compilation flags. # _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= if test "$GCC" = no; then case $host_os in sco3.2v5*) _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' ;; esac fi if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : else AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no fi fi # # Check to make sure the static flag actually works. # AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), [], [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_SYS_LIB_STRIP AC_LIBTOOL_DLOPEN_SELF($1) # Report which librarie types wil actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case "$host_os" in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix4* | aix5*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_C_CONFIG # AC_LIBTOOL_LANG_CXX_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_AC_TAGVAR(no_undefined_flag, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Dependencies to place before and after the object being linked: _LT_AC_TAGVAR(predep_objects, $1)= _LT_AC_TAGVAR(postdep_objects, $1)= _LT_AC_TAGVAR(predeps, $1)= _LT_AC_TAGVAR(postdeps, $1)= _LT_AC_TAGVAR(compiler_lib_search_path, $1)= # Source file extension for C++ test sources. ac_ext=cc # Object file extension for compiled C++ test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;\n" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration AC_PROG_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ grep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_AC_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=yes else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # -bexpall does not export symbols beginning with underscore (_) _LT_AC_TAGVAR(always_export_symbols, $1)=yes # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds it's shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ## _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... ## _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ## cp $export_symbols $output_objdir/$soname.def; ## else ## echo EXPORTS > $output_objdir/$soname.def; ## cat $export_symbols >> $output_objdir/$soname.def; ## fi~ ## $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base ${wl}--out-implib,$lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; darwin* | rhapsody*) case "$host_os" in rhapsody* | darwin1.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes ; then lt_int_apple_cc_single_mod=no output_verbose_link_cmd='echo' if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then lt_int_apple_cc_single_mod=yes fi if test "X$lt_int_apple_cc_single_mod" = Xyes ; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' fi _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's if test "X$lt_int_apple_cc_single_mod" = Xyes ; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' fi _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else case "$cc_basename" in xlc*) output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ;; dgux*) case $cc_basename in ec++) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; ghcx) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[12]*) # C++ shared libraries reported to be fairly broken before switch to ELF _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | kfreebsd*-gnu) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_AC_TAGVAR(ld_shlibs, $1)=yes ;; gnu*) ;; hpux9*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then case "$host_cpu" in hppa*64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; ia64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ;; *) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case "$host_cpu" in hppa*64*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; ia64*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; *) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC) case "$host_cpu" in hppa*64*|ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case "$host_cpu" in ia64*|hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; irix5* | irix6*) case $cc_basename in CC) # SGI C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; linux*) case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; cxx) # Compaq C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; openbsd2*) # C++ shared libraries are fairly broken _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd='echo' ;; osf3*) case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; RCC) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; osf4* | osf5*) case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; RCC) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ $rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; sco*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no case $cc_basename in CC) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; sunos4*) case $cc_basename in CC) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; lcc) # Lucid # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The C++ compiler is used as linker so we must use $wl # flag to pass the commands to the underlying system # linker. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx) # Green Hills C++ Compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' fi ;; esac ;; sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; tandem*) case $cc_basename in NCC) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_AC_TAGVAR(GCC, $1)="$GXX" _LT_AC_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... AC_LIBTOOL_POSTDEP_PREDEP($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_SYS_LIB_STRIP AC_LIBTOOL_DLOPEN_SELF($1) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ldcxx=$with_gnu_ld with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ])# AC_LIBTOOL_LANG_CXX_CONFIG # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) # ------------------------ # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" ifelse([$1], [], [#! $SHELL # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. # # This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="$SED -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= # ### BEGIN LIBTOOL CONFIG], [# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # A language-specific compiler. CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) # Is the compiler the GNU C compiler? with_gcc=$_LT_AC_TAGVAR(GCC, $1) # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_[]_LT_AC_TAGVAR(LD, $1) # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) # Must we lock files when doing compilation ? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) # Commands used to build and install a shared archive. archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) # Flag that forces no undefined symbols. no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" # Set to yes if exported symbols are required. always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) # The commands to list exported symbols. export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) # Symbols that must always be exported. include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) ifelse([$1],[], [# ### END LIBTOOL CONFIG], [# ### END LIBTOOL TAG CONFIG: $tagname]) __EOF__ ifelse([$1],[], [ case $host_os in aix3*) cat <<\EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || \ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ]) else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ])# AC_LIBTOOL_CONFIG # AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi ])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # --------------------------------- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_PROG_NM]) AC_REQUIRE([AC_OBJEXT]) # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Transform the above into a raw symbol and a C symbol. symxfrm='\1 \2\3 \3' # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32*) symcode='[[ABCDGISTW]]' ;; hpux*) # Its linker distinguishes data from code symbols if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris* | sysv5*) symcode='[[BDRT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if grep ' nm_test_var$' "$nlist" >/dev/null; then if grep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } lt_preloaded_symbols[[]] = { EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -f conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) # --------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], [_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)= AC_MSG_CHECKING([for $compiler option to produce PIC]) ifelse([$1],[CXX],[ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | os2* | pw32*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case "$host_cpu" in hppa*64*|ia64*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix4* | aix5*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case "$cc_basename" in xlc*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; dgux*) case $cc_basename in ec++) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | kfreebsd*-gnu) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" case "$host_cpu" in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux*) case $cc_basename in KCC) # KAI C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; icpc) # Intel C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; cxx) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd*) ;; osf3* | osf4* | osf5*) case $cc_basename in KCC) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC) # Rational C++ 2.4.1 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx) # Digital/Compaq C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; sco*) case $cc_basename in CC) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; *) ;; esac ;; solaris*) case $cc_basename in CC) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC) # Sun C++ 4.x _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc) # Lucid _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; tandem*) case $cc_basename in NCC) # NonStop-UX NCC 3.20 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; unixware*) ;; vxworks*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case "$host_cpu" in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case "$cc_basename" in xlc*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case "$host_cpu" in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; newsos6) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; linux*) case $CC in icc* | ecc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; ccc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; esac ;; osf3* | osf4* | osf5*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; sco3.2v5*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' ;; solaris*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sunos4*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; uts4*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi case "$host_os" in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" ;; esac ]) # AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) # ------------------------------------ # See if the linker supports building shared libraries. AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ifelse([$1],[CXX],[ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix4* | aix5*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw*) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' ;; *) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ],[ runpath_var= _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)= _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_AC_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac _LT_AC_TAGVAR(ld_shlibs, $1)=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ## _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... ## _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ## cp $export_symbols $output_objdir/$soname.def; ## else ## echo EXPORTS > $output_objdir/$soname.def; ## cat $export_symbols >> $output_objdir/$soname.def; ## fi~ ## $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base ${wl}--out-implib,$lib' else ld_shlibs=no fi ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris* | sysv5*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; sunos4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; linux*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac if test $supports_anon_versioning = yes; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' else _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" fi else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=yes _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$link_static_flag"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=yes else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # -bexpall does not export symbols beginning with underscore (_) _LT_AC_TAGVAR(always_export_symbols, $1)=yes # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds it's shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # see comment about different semantics on the GNU ld section _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; bsdi[[45]]*) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) case "$host_os" in rhapsody* | darwin1.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else case "$cc_basename" in xlc*) output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ;; dgux*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | kfreebsd*-gnu) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case "$host_cpu" in hppa*64*|ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case "$host_cpu" in hppa*64*|ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; esac fi if test "$with_gnu_ld" = no; then case "$host_cpu" in hppa*64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; ia64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ;; *) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; openbsd*) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi ;; os2*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; sco3.2v5*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ;; solaris*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_AC_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_AC_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4.2uw2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no hardcode_runpath_var=yes runpath_var=LD_RUN_PATH ;; sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv5*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' ;; uts4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ]) AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi # # Do we need to explicitly link libc? # case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_AC_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $rm conftest* printf "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) _LT_AC_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) then _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no else _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi ;; esac ])# AC_LIBTOOL_PROG_LD_SHLIBS # _LT_AC_FILE_LTDLL_C # ------------------- # Be careful that the start marker always follows a newline. AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ ])# _LT_AC_FILE_LTDLL_C # _LT_AC_TAGVAR(VARNAME, [TAGNAME]) # --------------------------------- AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) # old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) # This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL]) AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS) ]) AC_DEFUN([LT_AC_PROG_RC], [AC_CHECK_TOOL(RC, windres, no) ]) ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ # LT_AC_PROG_SED # -------------- # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. AC_DEFUN([LT_AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && break cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_MSG_RESULT([$SED]) ])