src/video/fbcon/SDL_fbelo.c

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

#include <unistd.h>
#include <sys/time.h>
#include <ctype.h>

#include "SDL_stdinc.h"
#include "SDL_fbvideo.h"
#include "SDL_fbelo.h"

/*
	calibration default values
	values are read from the following environment variables:

	SDL_ELO_MIN_X
	SDL_ELO_MAX_X
	SDL_ELO_MIN_Y
	SDL_ELO_MAX_Y
*/

static int ELO_MIN_X = 400;
static int ELO_MAX_X = 3670;
static int ELO_MIN_Y = 500;
static int ELO_MAX_Y = 3540;

#define ELO_SNAP_SIZE 6
#define ELO_TOUCH_BYTE		'T'
#define ELO_ID			'I'
#define ELO_MODE		'M'
#define ELO_PARAMETER		'P'
#define ELO_REPORT		'B'
#define ELO_ACK			'A'

#define ELO_INIT_CHECKSUM	0xAA

#define ELO_BTN_PRESS		0x01
#define ELO_STREAM		0x02
#define ELO_BTN_RELEASE		0x04

#define ELO_TOUCH_MODE		0x01
#define ELO_STREAM_MODE		0x02
#define ELO_UNTOUCH_MODE	0x04
#define ELO_RANGE_CHECK_MODE	0x40
#define ELO_TRIM_MODE		0x02
#define ELO_CALIB_MODE		0x04
#define ELO_SCALING_MODE	0x08
#define ELO_TRACKING_MODE	0x40

#define ELO_SERIAL_MASK		0xF8

#define ELO_SERIAL_IO		'0'

#define ELO_MAX_TRIALS	3
#define ELO_MAX_WAIT		100000
#define ELO_UNTOUCH_DELAY	5
#define ELO_REPORT_DELAY	1

/*	eloParsePacket
*/
int
eloParsePacket(unsigned char *mousebuf, int *dx, int *dy, int *button_state)
{
    static int elo_button = 0;
    static int last_x = 0;
    static int last_y = 0;
    int x, y;

    /* Check if we have a touch packet */
    if (mousebuf[1] != ELO_TOUCH_BYTE) {
        return 0;
    }

    x = ((mousebuf[4] << 8) | mousebuf[3]);
    y = ((mousebuf[6] << 8) | mousebuf[5]);

    if ((SDL_abs(x - last_x) > ELO_SNAP_SIZE)
        || (SDL_abs(y - last_y) > ELO_SNAP_SIZE)) {
        *dx = ((mousebuf[4] << 8) | mousebuf[3]);
        *dy = ((mousebuf[6] << 8) | mousebuf[5]);
    } else {
        *dx = last_x;
        *dy = last_y;
    }

    last_x = *dx;
    last_y = *dy;

    if ((mousebuf[2] & 0x07) == ELO_BTN_PRESS) {
        elo_button = 1;
    }
    if ((mousebuf[2] & 0x07) == ELO_BTN_RELEASE) {
        elo_button = 0;
    }

    *button_state = elo_button;
    return 1;
}

/*	Convert the raw coordinates from the ELO controller
	to a screen position.
*/
void
eloConvertXY(_THIS, int *dx, int *dy)
{
    int input_x = *dx;
    int input_y = *dy;
    int width = ELO_MAX_X - ELO_MIN_X;
    int height = ELO_MAX_Y - ELO_MIN_Y;

    *dx =
        ((int) cache_vinfo.xres -
         ((int) cache_vinfo.xres * (input_x - ELO_MIN_X)) / width);
    *dy = (cache_vinfo.yres * (input_y - ELO_MIN_Y)) / height;
}


/*	eloGetPacket
*/
int
eloGetPacket(unsigned char *buffer, int *buffer_p, int *checksum, int fd)
{
    int num_bytes;
    int ok;

    if (fd == 0) {
        num_bytes = ELO_PACKET_SIZE;
    } else {
        num_bytes = read(fd,
                         (char *) (buffer + *buffer_p),
                         ELO_PACKET_SIZE - *buffer_p);
    }

    if (num_bytes < 0) {
#ifdef DEBUG_MOUSE
        fprintf(stderr,
                "System error while reading from Elographics touchscreen.\n");
#endif
        return 0;
    }

    while (num_bytes) {
        if ((*buffer_p == 0) && (buffer[0] != ELO_START_BYTE)) {
            SDL_memcpy(&buffer[0], &buffer[1], num_bytes - 1);
        } else {
            if (*buffer_p < ELO_PACKET_SIZE - 1) {
                *checksum = *checksum + buffer[*buffer_p];
                *checksum = *checksum % 256;
            }
            (*buffer_p)++;
        }
        num_bytes--;
    }

    if (*buffer_p == ELO_PACKET_SIZE) {
        ok = (*checksum == buffer[ELO_PACKET_SIZE - 1]);
        *checksum = ELO_INIT_CHECKSUM;
        *buffer_p = 0;

        if (!ok) {
            return 0;
        }

        return 1;
    } else {
        return 0;
    }
}

/* eloSendPacket
*/

int
eloSendPacket(unsigned char *packet, int fd)
{
    int i, result;
    int sum = ELO_INIT_CHECKSUM;

    packet[0] = ELO_START_BYTE;
    for (i = 0; i < ELO_PACKET_SIZE - 1; i++) {
        sum += packet[i];
        sum &= 0xFF;
    }
    packet[ELO_PACKET_SIZE - 1] = sum;

    result = write(fd, packet, ELO_PACKET_SIZE);

    if (result != ELO_PACKET_SIZE) {
#ifdef DEBUG_MOUSE
        printf("System error while sending to Elographics touchscreen.\n");
#endif
        return 0;
    } else {
        return 1;
    }
}


/*	eloWaitForInput
 */
int
eloWaitForInput(int fd, int timeout)
{
    fd_set readfds;
    struct timeval to;
    int r;

    FD_ZERO(&readfds);
    FD_SET(fd, &readfds);
    to.tv_sec = 0;
    to.tv_usec = timeout;

    r = select(FD_SETSIZE, &readfds, NULL, NULL, &to);
    return r;
}

/*	eloWaitReply
 */
int
eloWaitReply(unsigned char type, unsigned char *reply, int fd)
{
    int ok;
    int i, result;
    int reply_p = 0;
    int sum = ELO_INIT_CHECKSUM;

    i = ELO_MAX_TRIALS;
    do {
        ok = 0;

        result = eloWaitForInput(fd, ELO_MAX_WAIT);

        if (result > 0) {
            ok = eloGetPacket(reply, &reply_p, &sum, fd);

            if (ok && reply[1] != type && type != ELO_PARAMETER) {
#ifdef DEBUG_MOUSE
                fprintf(stderr, "Wrong reply received\n");
#endif
                ok = 0;
            }
        } else {
#ifdef DEBUG_MOUSE
            fprintf(stderr, "No input!\n");
#endif
        }

        if (result == 0) {
            i--;
        }
    } while (!ok && (i > 0));

    return ok;
}


/*	eloWaitAck
 */

int
eloWaitAck(int fd)
{
    unsigned char packet[ELO_PACKET_SIZE];
    int i, nb_errors;

    if (eloWaitReply(ELO_ACK, packet, fd)) {
        for (i = 0, nb_errors = 0; i < 4; i++) {
            if (packet[2 + i] != '0') {
                nb_errors++;
            }
        }

        if (nb_errors != 0) {
#ifdef DEBUG_MOUSE
            fprintf(stderr,
                    "Elographics acknowledge packet reports %d errors\n",
                    nb_errors);
#endif
        }
        return 1;
    } else {
        return 0;
    }
}


/*	eloSendQuery --
*/
int
eloSendQuery(unsigned char *request, unsigned char *reply, int fd)
{
    int ok;

    if (eloSendPacket(request, fd)) {
        ok = eloWaitReply(toupper(request[1]), reply, fd);
        if (ok) {
            ok = eloWaitAck(fd);
        }
        return ok;
    } else {
        return 0;
    }
}


/*	eloSendControl
*/
int
eloSendControl(unsigned char *control, int fd)
{
    if (eloSendPacket(control, fd)) {
        return eloWaitAck(fd);
    } else {
        return 0;
    }
}

/*	eloInitController
*/
int
eloInitController(int fd)
{
    unsigned char req[ELO_PACKET_SIZE];
    unsigned char reply[ELO_PACKET_SIZE];
    const char *buffer = NULL;
    int result = 0;

    struct termios mouse_termios;

    /* try to read the calibration values */
    buffer = SDL_getenv("SDL_ELO_MIN_X");
    if (buffer) {
        ELO_MIN_X = SDL_atoi(buffer);
    }
    buffer = SDL_getenv("SDL_ELO_MAX_X");
    if (buffer) {
        ELO_MAX_X = SDL_atoi(buffer);
    }
    buffer = SDL_getenv("SDL_ELO_MIN_Y");
    if (buffer) {
        ELO_MIN_Y = SDL_atoi(buffer);
    }
    buffer = SDL_getenv("SDL_ELO_MAX_Y");
    if (buffer) {
        ELO_MAX_Y = SDL_atoi(buffer);
    }
#ifdef DEBUG_MOUSE
    fprintf(stderr,
            "ELO calibration values:\nmin_x: %i\nmax_x: %i\nmin_y: %i\nmax_y: %i\n",
            ELO_MIN_X, ELO_MAX_X, ELO_MIN_Y, ELO_MAX_Y);
#endif

    /* set comm params */
    SDL_memset(&mouse_termios, 0, sizeof(mouse_termios));
    mouse_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL;
    mouse_termios.c_cc[VMIN] = 1;
    result = tcsetattr(fd, TCSANOW, &mouse_termios);

    if (result < 0) {
#ifdef DEBUG_MOUSE
        fprintf(stderr, "Unable to configure Elographics touchscreen port\n");
#endif
        return 0;
    }

    SDL_memset(req, 0, ELO_PACKET_SIZE);
    req[1] = tolower(ELO_PARAMETER);
    if (!eloSendQuery(req, reply, fd)) {
#ifdef DEBUG_MOUSE
        fprintf(stderr,
                "Not at the specified rate or model 2310, will continue\n");
#endif
    }

    SDL_memset(req, 0, ELO_PACKET_SIZE);
    req[1] = tolower(ELO_ID);
    if (eloSendQuery(req, reply, fd)) {
#ifdef DEBUG_MOUSE
        fprintf(stderr, "Ok, controller configured!\n");
#endif
    } else {
#ifdef DEBUG_MOUSE
        fprintf(stderr,
                "Unable to ask Elographics touchscreen identification\n");
#endif
        return 0;
    }

    SDL_memset(req, 0, ELO_PACKET_SIZE);
    req[1] = ELO_MODE;
    req[3] = ELO_TOUCH_MODE | ELO_STREAM_MODE | ELO_UNTOUCH_MODE;
    req[4] = ELO_TRACKING_MODE;
    if (!eloSendControl(req, fd)) {
#ifdef DEBUG_MOUSE
        fprintf(stderr,
                "Unable to change Elographics touchscreen operating mode\n");
#endif
        return 0;
    }

    SDL_memset(req, 0, ELO_PACKET_SIZE);
    req[1] = ELO_REPORT;
    req[2] = ELO_UNTOUCH_DELAY;
    req[3] = ELO_REPORT_DELAY;
    if (!eloSendControl(req, fd)) {
#ifdef DEBUG_MOUSE
        fprintf(stderr,
                "Unable to change Elographics touchscreen reports timings\n");
#endif
        return 0;
    }

    return 1;
}

int
eloReadPosition(_THIS, int fd, int *x, int *y, int *button_state, int *realx,
                int *realy)
{
    unsigned char buffer[ELO_PACKET_SIZE];
    int pointer = 0;
    int checksum = ELO_INIT_CHECKSUM;

    while (pointer < ELO_PACKET_SIZE) {
        if (eloGetPacket(buffer, &pointer, &checksum, fd)) {
            break;
        }
    }

    if (!eloParsePacket(buffer, realx, realy, button_state)) {
        return 0;
    }

    *x = *realx;
    *y = *realy;

    eloConvertXY(this, x, y);

    return 1;
}

/* vi: set ts=4 sw=4 expandtab: */