/*

    SDL - Simple DirectMedia Layer

    Copyright (C) 1997-2010 Sam Lantinga

    This library is free software; you can redistribute it and/or

    modify it under the terms of the GNU Lesser General Public

    License as published by the Free Software Foundation; either

    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,

    but WITHOUT ANY WARRANTY; without even the implied warranty of

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public

    License along with this library; if not, write to the Free Software

    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga

    slouken@libsdl.org

*/

/**

 *  \file SDL_video.h

 *  

 *  Header file for SDL video functions.

 */

#ifndef _SDL_video_h

#define _SDL_video_h

#include "SDL_stdinc.h"

#include "SDL_pixels.h"

#include "SDL_rect.h"

#include "SDL_surface.h"

#include "begin_code.h"

/* Set up for C function definitions, even when using C++ */

#ifdef __cplusplus

/* *INDENT-OFF* */

extern "C" {

/* *INDENT-ON* */

#endif

/**

 *  \brief  The structure that defines a display mode

 *  

 *  \sa SDL_GetNumDisplayModes()

 *  \sa SDL_GetDisplayMode()

 *  \sa SDL_GetDesktopDisplayMode()

 *  \sa SDL_GetCurrentDisplayMode()

 *  \sa SDL_GetClosestDisplayMode()

 *  \sa SDL_SetWindowDisplayMode()

 *  \sa SDL_GetWindowDisplayMode()

 */

typedef struct

{

    Uint32 format;              /**< pixel format */

    int w;                      /**< width */

    int h;                      /**< height */

    int refresh_rate;           /**< refresh rate (or zero for unspecified) */

    void *driverdata;           /**< driver-specific data, initialize to 0 */

} SDL_DisplayMode;

/**

 *  \brief The type used to identify a window

 *  

 *  \sa SDL_CreateWindow()

 *  \sa SDL_CreateWindowFrom()

 *  \sa SDL_DestroyWindow()

 *  \sa SDL_GetWindowData()

 *  \sa SDL_GetWindowFlags()

 *  \sa SDL_GetWindowGrab()

 *  \sa SDL_GetWindowPosition()

 *  \sa SDL_GetWindowSize()

 *  \sa SDL_GetWindowTitle()

 *  \sa SDL_HideWindow()

 *  \sa SDL_MaximizeWindow()

 *  \sa SDL_MinimizeWindow()

 *  \sa SDL_RaiseWindow()

 *  \sa SDL_RestoreWindow()

 *  \sa SDL_SetWindowData()

 *  \sa SDL_SetWindowFullscreen()

 *  \sa SDL_SetWindowGrab()

 *  \sa SDL_SetWindowIcon()

 *  \sa SDL_SetWindowPosition()

 *  \sa SDL_SetWindowSize()

 *  \sa SDL_SetWindowTitle()

 *  \sa SDL_ShowWindow()

 */

typedef struct SDL_Window SDL_Window;

/**

 *  \brief The flags on a window

 *  

 *  \sa SDL_GetWindowFlags()

 */

typedef enum

{

    SDL_WINDOW_FULLSCREEN = 0x00000001,         /**< fullscreen window, implies borderless */

    SDL_WINDOW_OPENGL = 0x00000002,             /**< window usable with OpenGL context */

    SDL_WINDOW_SHOWN = 0x00000004,              /**< window is visible */

    SDL_WINDOW_BORDERLESS = 0x00000008,         /**< no window decoration */

    SDL_WINDOW_RESIZABLE = 0x00000010,          /**< window can be resized */

    SDL_WINDOW_MINIMIZED = 0x00000020,          /**< window is minimized */

    SDL_WINDOW_MAXIMIZED = 0x00000040,          /**< window is maximized */

    SDL_WINDOW_INPUT_GRABBED = 0x00000100,      /**< window has grabbed input focus */

    SDL_WINDOW_INPUT_FOCUS = 0x00000200,        /**< window has input focus */

    SDL_WINDOW_MOUSE_FOCUS = 0x00000400,        /**< window has mouse focus */

    SDL_WINDOW_FOREIGN = 0x00000800             /**< window not created by SDL */

} SDL_WindowFlags;

/**

 *  \brief Used to indicate that you don't care what the window position is.

 */

#define SDL_WINDOWPOS_UNDEFINED 0x7FFFFFF

/**

 *  \brief Used to indicate that the window position should be centered.

 */

#define SDL_WINDOWPOS_CENTERED  0x7FFFFFE

/**

 *  \brief Event subtype for window events

 */

typedef enum

{

    SDL_WINDOWEVENT_NONE,           /**< Never used */

    SDL_WINDOWEVENT_SHOWN,          /**< Window has been shown */

    SDL_WINDOWEVENT_HIDDEN,         /**< Window has been hidden */

    SDL_WINDOWEVENT_EXPOSED,        /**< Window has been exposed and should be 

                                         redrawn */

    SDL_WINDOWEVENT_MOVED,          /**< Window has been moved to data1, data2 

                                     */

    SDL_WINDOWEVENT_RESIZED,        /**< Window size changed to data1xdata2 */

    SDL_WINDOWEVENT_MINIMIZED,      /**< Window has been minimized */

    SDL_WINDOWEVENT_MAXIMIZED,      /**< Window has been maximized */

    SDL_WINDOWEVENT_RESTORED,       /**< Window has been restored to normal size

                                         and position */

    SDL_WINDOWEVENT_ENTER,          /**< Window has gained mouse focus */

    SDL_WINDOWEVENT_LEAVE,          /**< Window has lost mouse focus */

    SDL_WINDOWEVENT_FOCUS_GAINED,   /**< Window has gained keyboard focus */

    SDL_WINDOWEVENT_FOCUS_LOST,     /**< Window has lost keyboard focus */

    SDL_WINDOWEVENT_CLOSE           /**< The window manager requests that the 

                                         window be closed */

} SDL_WindowEventID;

/**

 *  \brief An opaque handle to an OpenGL context.

 */

typedef void *SDL_GLContext;

/**

 *  \brief OpenGL configuration attributes

 */

typedef enum

{

    SDL_GL_RED_SIZE,

    SDL_GL_GREEN_SIZE,

    SDL_GL_BLUE_SIZE,

    SDL_GL_ALPHA_SIZE,

    SDL_GL_BUFFER_SIZE,

    SDL_GL_DOUBLEBUFFER,

    SDL_GL_DEPTH_SIZE,

    SDL_GL_STENCIL_SIZE,

    SDL_GL_ACCUM_RED_SIZE,

    SDL_GL_ACCUM_GREEN_SIZE,

    SDL_GL_ACCUM_BLUE_SIZE,

    SDL_GL_ACCUM_ALPHA_SIZE,

    SDL_GL_STEREO,

    SDL_GL_MULTISAMPLEBUFFERS,

    SDL_GL_MULTISAMPLESAMPLES,

    SDL_GL_ACCELERATED_VISUAL,

    SDL_GL_RETAINED_BACKING,

    SDL_GL_CONTEXT_MAJOR_VERSION,

    SDL_GL_CONTEXT_MINOR_VERSION

} SDL_GLattr;

/* Function prototypes */

/**

 *  \brief Get the number of video drivers compiled into SDL

 *  

 *  \sa SDL_GetVideoDriver()

 */

extern DECLSPEC int SDLCALL SDL_GetNumVideoDrivers(void);

/**

 *  \brief Get the name of a built in video driver.

 *  

 *  \note The video drivers are presented in the order in which they are

 *        normally checked during initialization.

 *  

 *  \sa SDL_GetNumVideoDrivers()

 */

extern DECLSPEC const char *SDLCALL SDL_GetVideoDriver(int index);

/**

 *  \brief Initialize the video subsystem, optionally specifying a video driver.

 *  

 *  \param driver_name Initialize a specific driver by name, or NULL for the 

 *                     default video driver.

 *  

 *  \return 0 on success, -1 on error

 *  

 *  This function initializes the video subsystem; setting up a connection

 *  to the window manager, etc, and determines the available display modes

 *  and pixel formats, but does not initialize a window or graphics mode.

 *  

 *  \sa SDL_VideoQuit()

 */

extern DECLSPEC int SDLCALL SDL_VideoInit(const char *driver_name);

/**

 *  \brief Shuts down the video subsystem.

 *  

 *  This function closes all windows, and restores the original video mode.

 *  

 *  \sa SDL_VideoInit()

 */

extern DECLSPEC void SDLCALL SDL_VideoQuit(void);

/**

 *  \brief Returns the name of the currently initialized video driver.

 *  

 *  \return The name of the current video driver or NULL if no driver

 *          has been initialized

 *  

 *  \sa SDL_GetNumVideoDrivers()

 *  \sa SDL_GetVideoDriver()

 */

extern DECLSPEC const char *SDLCALL SDL_GetCurrentVideoDriver(void);

/**

 *  \brief Returns the number of available video displays.

 *  

 *  \sa SDL_GetDisplayBounds()

 *  \sa SDL_SelectVideoDisplay()

 */

extern DECLSPEC int SDLCALL SDL_GetNumVideoDisplays(void);

/**

 *  \brief Get the desktop area represented by a display, with the primary

 *         display located at 0,0

 *  

 *  \return 0 on success, or -1 if the index is out of range.

 *  

 *  \sa SDL_GetNumVideoDisplays()

 */

extern DECLSPEC int SDLCALL SDL_GetDisplayBounds(int index, SDL_Rect * rect);

/**

 *  \brief Set the index of the currently selected display.

 *  

 *  \return 0 on success, or -1 if the index is out of range.

 *  

 *  \sa SDL_GetNumVideoDisplays()

 *  \sa SDL_GetCurrentVideoDisplay()

 */

extern DECLSPEC int SDLCALL SDL_SelectVideoDisplay(int index);

/**

 *  \brief Get the index of the currently selected display.

 *  

 *  \return The index of the currently selected display.

 *  

 *  \sa SDL_GetNumVideoDisplays()

 *  \sa SDL_SelectVideoDisplay()

 */

extern DECLSPEC int SDLCALL SDL_GetCurrentVideoDisplay(void);

/**

 *  \brief Returns the number of available display modes for the current display.

 *  

 *  \sa SDL_GetDisplayMode()

 */

extern DECLSPEC int SDLCALL SDL_GetNumDisplayModes(void);

/**

 *  \brief Fill in information about a specific display mode.

 *  

 *  \note The display modes are sorted in this priority:

 *        \li bits per pixel -> more colors to fewer colors

 *        \li width -> largest to smallest

 *        \li height -> largest to smallest

 *        \li refresh rate -> highest to lowest

 *  

 *  \sa SDL_GetNumDisplayModes()

 */

extern DECLSPEC int SDLCALL SDL_GetDisplayMode(int index,

                                               SDL_DisplayMode * mode);

/**

 *  \brief Fill in information about the desktop display mode for the current 

 *         display.

 */

extern DECLSPEC int SDLCALL SDL_GetDesktopDisplayMode(SDL_DisplayMode * mode);

/**

 *  \brief Fill in information about the current display mode.

 */

extern DECLSPEC int SDLCALL SDL_GetCurrentDisplayMode(SDL_DisplayMode * mode);

/**

 *  \brief Get the closest match to the requested display mode.

 *  

 *  \param mode The desired display mode

 *  \param closest A pointer to a display mode to be filled in with the closest 

 *                 match of the available display modes.

 *  

 *  \return The passed in value \c closest, or NULL if no matching video mode 

 *          was available.

 *  

 *  The available display modes are scanned, and \c closest is filled in with the

 *  closest mode matching the requested mode and returned.  The mode format and 

 *  refresh_rate default to the desktop mode if they are 0.  The modes are 

 *  scanned with size being first priority, format being second priority, and 

 *  finally checking the refresh_rate.  If all the available modes are too 

 *  small, then NULL is returned.

 *  

 *  \sa SDL_GetNumDisplayModes()

 *  \sa SDL_GetDisplayMode()

 */

extern DECLSPEC SDL_DisplayMode *SDLCALL SDL_GetClosestDisplayMode(const

                                                                   SDL_DisplayMode

                                                                   * mode,

                                                                   SDL_DisplayMode

                                                                   * closest);

/**

 *  \brief Set the display mode used when a fullscreen window is visible

 *         on the currently selected display.  By default the window's

 *         dimensions and the desktop format and refresh rate are used.

 *  

 *  \param mode The mode to use, or NULL for the default mode.

 *  

 *  \return 0 on success, or -1 if setting the display mode failed.

 *  

 *  \sa SDL_GetWindowDisplayMode()

 *  \sa SDL_SetWindowFullscreen()

 */

extern DECLSPEC int SDLCALL SDL_SetWindowDisplayMode(SDL_Window * window,

                                                     const SDL_DisplayMode

                                                         * mode);

/**

 *  \brief Fill in information about the display mode used when a fullscreen

 *         window is visible on the currently selected display.

 *

 *  \sa SDL_SetWindowDisplayMode()

 *  \sa SDL_SetWindowFullscreen()

 */

extern DECLSPEC int SDLCALL SDL_GetWindowDisplayMode(SDL_Window * window,

                                                     SDL_DisplayMode * mode);

/**

 *  \brief Set the gamma correction for each of the color channels on the 

 *         currently selected display.

 *  

 *  \return 0 on success, or -1 if setting the gamma isn't supported.

 *  

 *  \sa SDL_SetGammaRamp()

 */

extern DECLSPEC int SDLCALL SDL_SetGamma(float red, float green, float blue);

/**

 *  \brief Set the gamma ramp for the currently selected display.

 *  

 *  \param red The translation table for the red channel, or NULL.

 *  \param green The translation table for the green channel, or NULL.

 *  \param blue The translation table for the blue channel, or NULL.

 *  

 *  \return 0 on success, or -1 if gamma ramps are unsupported.

 *  

 *  Set the gamma translation table for the red, green, and blue channels

 *  of the video hardware.  Each table is an array of 256 16-bit quantities,

 *  representing a mapping between the input and output for that channel.

 *  The input is the index into the array, and the output is the 16-bit

 *  gamma value at that index, scaled to the output color precision.

 *  

 *  \sa SDL_GetGammaRamp()

 */

extern DECLSPEC int SDLCALL SDL_SetGammaRamp(const Uint16 * red,

                                             const Uint16 * green,

                                             const Uint16 * blue);

/**

 *  \brief Get the gamma ramp for the currently selected display.

 *  

 *  \param red   A pointer to a 256 element array of 16-bit quantities to hold 

 *               the translation table for the red channel, or NULL.

 *  \param green A pointer to a 256 element array of 16-bit quantities to hold 

 *               the translation table for the green channel, or NULL.

 *  \param blue  A pointer to a 256 element array of 16-bit quantities to hold 

 *               the translation table for the blue channel, or NULL.

 *   

 *  \return 0 on success, or -1 if gamma ramps are unsupported.

 *  

 *  \sa SDL_SetGammaRamp()

 */

extern DECLSPEC int SDLCALL SDL_GetGammaRamp(Uint16 * red, Uint16 * green,

                                             Uint16 * blue);

/**

 *  \brief Create a window with the specified position, dimensions, and flags.

 *  

 *  \param title The title of the window, in UTF-8 encoding.

 *  \param x     The x position of the window, ::SDL_WINDOWPOS_CENTERED, or 

 *               ::SDL_WINDOWPOS_UNDEFINED.

 *  \param y     The y position of the window, ::SDL_WINDOWPOS_CENTERED, or 

 *               ::SDL_WINDOWPOS_UNDEFINED.

 *  \param w     The width of the window.

 *  \param h     The height of the window.

 *  \param flags The flags for the window, a mask of any of the following: 

 *               ::SDL_WINDOW_FULLSCREEN, ::SDL_WINDOW_OPENGL, 

 *               ::SDL_WINDOW_SHOWN,      ::SDL_WINDOW_BORDERLESS, 

 *               ::SDL_WINDOW_RESIZABLE,  ::SDL_WINDOW_MAXIMIZED, 

 *               ::SDL_WINDOW_MINIMIZED,  ::SDL_WINDOW_INPUT_GRABBED.

 *  

 *  \return The id of the window created, or zero if window creation failed.

 *  

 *  \sa SDL_DestroyWindow()

 */

extern DECLSPEC SDL_Window * SDLCALL SDL_CreateWindow(const char *title,

                                                      int x, int y, int w,

                                                      int h, Uint32 flags);

/**

 *  \brief Create an SDL window from an existing native window.

 *  

 *  \param data A pointer to driver-dependent window creation data

 *  

 *  \return The id of the window created, or zero if window creation failed.

 *  

 *  \sa SDL_DestroyWindow()

 */

extern DECLSPEC SDL_Window * SDLCALL SDL_CreateWindowFrom(const void *data);

/**

 *  \brief Get the numeric ID of a window, for logging purposes.

 */

extern DECLSPEC Uint32 SDLCALL SDL_GetWindowID(SDL_Window * window);

/**

 *  \brief Get a window from a stored ID, or NULL if it doesn't exist.

 */

extern DECLSPEC SDL_Window * SDLCALL SDL_GetWindowFromID(Uint32 id);

/**

 *  \brief Get the window flags.

 */

extern DECLSPEC Uint32 SDLCALL SDL_GetWindowFlags(SDL_Window * window);

/**

 *  \brief Set the title of a window, in UTF-8 format.

 *  

 *  \sa SDL_GetWindowTitle()

 */

extern DECLSPEC void SDLCALL SDL_SetWindowTitle(SDL_Window * window,

                                                const char *title);

/**

 *  \brief Get the title of a window, in UTF-8 format.

 *  

 *  \sa SDL_SetWindowTitle()

 */

extern DECLSPEC const char *SDLCALL SDL_GetWindowTitle(SDL_Window * window);

/**

 *  \brief Set the icon for a window.

 *  

 *  \param icon The icon for the window.

 */

extern DECLSPEC void SDLCALL SDL_SetWindowIcon(SDL_Window * window,

                                               SDL_Surface * icon);

/**

 *  \brief Associate an arbitrary pointer with a window.

 *  

 *  \sa SDL_GetWindowData()

 */

extern DECLSPEC void SDLCALL SDL_SetWindowData(SDL_Window * window,

                                               void *userdata);

/**

 *  \brief Retrieve the data pointer associated with a window.

 *  

 *  \sa SDL_SetWindowData()

 */

extern DECLSPEC void *SDLCALL SDL_GetWindowData(SDL_Window * window);

/**

 *  \brief Set the position of a window.

 *  

 *  \param window The window to reposition.

 *  \param x        The x coordinate of the window, ::SDL_WINDOWPOS_CENTERED, or

                    ::SDL_WINDOWPOS_UNDEFINED.

 *  \param y        The y coordinate of the window, ::SDL_WINDOWPOS_CENTERED, or

                    ::SDL_WINDOWPOS_UNDEFINED.

 *  

 *  \note The window coordinate origin is the upper left of the display.

 *  

 *  \sa SDL_GetWindowPosition()

 */

extern DECLSPEC void SDLCALL SDL_SetWindowPosition(SDL_Window * window,

                                                   int x, int y);

/**

 *  \brief Get the position of a window.

 *  

 *  \sa SDL_SetWindowPosition()

 */

extern DECLSPEC void SDLCALL SDL_GetWindowPosition(SDL_Window * window,

                                                   int *x, int *y);

/**

 *  \brief Set the size of a window's client area.

 *  

 *  \note You can't change the size of a fullscreen window, it automatically

 *        matches the size of the display mode.

 *  

 *  \sa SDL_GetWindowSize()

 */

extern DECLSPEC void SDLCALL SDL_SetWindowSize(SDL_Window * window, int w,

                                               int h);

/**

 *  \brief Get the size of a window's client area.

 *  

 *  \sa SDL_SetWindowSize()

 */

extern DECLSPEC void SDLCALL SDL_GetWindowSize(SDL_Window * window, int *w,

                                               int *h);

/**

 *  \brief Show a window.

 *  

 *  \sa SDL_HideWindow()

 */

extern DECLSPEC void SDLCALL SDL_ShowWindow(SDL_Window * window);

/**

 *  \brief Hide a window.

 *  

 *  \sa SDL_ShowWindow()

 */

extern DECLSPEC void SDLCALL SDL_HideWindow(SDL_Window * window);

/**

 *  \brief Raise a window above other windows and set the input focus.

 */

extern DECLSPEC void SDLCALL SDL_RaiseWindow(SDL_Window * window);

/**

 *  \brief Make a window as large as possible.

 *  

 *  \sa SDL_RestoreWindow()

 */

extern DECLSPEC void SDLCALL SDL_MaximizeWindow(SDL_Window * window);

/**

 *  \brief Minimize a window to an iconic representation.

 *  

 *  \sa SDL_RestoreWindow()

 */

extern DECLSPEC void SDLCALL SDL_MinimizeWindow(SDL_Window * window);

/**

 *  \brief Restore the size and position of a minimized or maximized window.

 *  

 *  \sa SDL_MaximizeWindow()

 *  \sa SDL_MinimizeWindow()

 */

extern DECLSPEC void SDLCALL SDL_RestoreWindow(SDL_Window * window);

/**

 *  \brief Set a window's fullscreen state.

 *  

 *  \return 0 on success, or -1 if setting the display mode failed.

 *  

 *  \sa SDL_SetWindowDisplayMode()

 *  \sa SDL_GetWindowDisplayMode()

 */

extern DECLSPEC int SDLCALL SDL_SetWindowFullscreen(SDL_Window * window,

                                                    int fullscreen);

/**

 *  \brief Set a window's input grab mode.

 *  

 *  \param mode This is 1 to grab input, and 0 to release input.

 *  

 *  \sa SDL_GetWindowGrab()

 */

extern DECLSPEC void SDLCALL SDL_SetWindowGrab(SDL_Window * window,

                                               int mode);

/**

 *  \brief Get a window's input grab mode.

 *  

 *  \return This returns 1 if input is grabbed, and 0 otherwise.

 *  

 *  \sa SDL_SetWindowGrab()

 */

extern DECLSPEC int SDLCALL SDL_GetWindowGrab(SDL_Window * window);

/**

 *  \brief Get driver specific information about a window.

 *  

 *  \note Include SDL_syswm.h for the declaration of SDL_SysWMinfo.

 */

struct SDL_SysWMinfo;

extern DECLSPEC SDL_bool SDLCALL SDL_GetWindowWMInfo(SDL_Window * window,

                                                     struct SDL_SysWMinfo

                                                     *info);

/**

 *  \brief Destroy a window.

 */

extern DECLSPEC void SDLCALL SDL_DestroyWindow(SDL_Window * window);

/**

 *  \brief Returns whether the screensaver is currently enabled (default on).

 *  

 *  \sa SDL_EnableScreenSaver()

 *  \sa SDL_DisableScreenSaver()

 */

extern DECLSPEC SDL_bool SDLCALL SDL_IsScreenSaverEnabled(void);

/**

 *  \brief Allow the screen to be blanked by a screensaver

 *  

 *  \sa SDL_IsScreenSaverEnabled()

 *  \sa SDL_DisableScreenSaver()

 */

extern DECLSPEC void SDLCALL SDL_EnableScreenSaver(void);

/**

 *  \brief Prevent the screen from being blanked by a screensaver

 *  

 *  \sa SDL_IsScreenSaverEnabled()

 *  \sa SDL_EnableScreenSaver()

 */

extern DECLSPEC void SDLCALL SDL_DisableScreenSaver(void);

/**

 *  \name OpenGL support functions

 */

/*@{*/

/**

 *  \brief Dynamically load an OpenGL library.

 *  

 *  \param path The platform dependent OpenGL library name, or NULL to open the 

 *              default OpenGL library.

 *  

 *  \return 0 on success, or -1 if the library couldn't be loaded.

 *  

 *  This should be done after initializing the video driver, but before

 *  creating any OpenGL windows.  If no OpenGL library is loaded, the default

 *  library will be loaded upon creation of the first OpenGL window.

 *  

 *  \note If you do this, you need to retrieve all of the GL functions used in

 *        your program from the dynamic library using SDL_GL_GetProcAddress().

 *  

 *  \sa SDL_GL_GetProcAddress()

 *  \sa SDL_GL_UnloadLibrary()

 */

extern DECLSPEC int SDLCALL SDL_GL_LoadLibrary(const char *path);

/**

 *  \brief Get the address of an OpenGL function.

 */

extern DECLSPEC void *SDLCALL SDL_GL_GetProcAddress(const char *proc);

/**

 *  \brief Unload the OpenGL library previously loaded by SDL_GL_LoadLibrary().

 *  

 *  \sa SDL_GL_LoadLibrary()

 */

extern DECLSPEC void SDLCALL SDL_GL_UnloadLibrary(void);

/**

 *  \brief Return true if an OpenGL extension is supported for the current 

 *         context.

 */

extern DECLSPEC SDL_bool SDLCALL SDL_GL_ExtensionSupported(const char

                                                           *extension);

/**

 *  \brief Set an OpenGL window attribute before window creation.

 */

extern DECLSPEC int SDLCALL SDL_GL_SetAttribute(SDL_GLattr attr, int value);

/**

 *  \brief Get the actual value for an attribute from the current context.

 */

extern DECLSPEC int SDLCALL SDL_GL_GetAttribute(SDL_GLattr attr, int *value);

/**

 *  \brief Create an OpenGL context for use with an OpenGL window, and make it 

 *         current.

 *  

 *  \sa SDL_GL_DeleteContext()

 */

extern DECLSPEC SDL_GLContext SDLCALL SDL_GL_CreateContext(SDL_Window *

                                                           window);

/**

 *  \brief Set up an OpenGL context for rendering into an OpenGL window.

 *  

 *  \note The context must have been created with a compatible window.

 */

extern DECLSPEC int SDLCALL SDL_GL_MakeCurrent(SDL_Window * window,

                                               SDL_GLContext context);

/**

 *  \brief Set the swap interval for the current OpenGL context.

 *  

 *  \param interval 0 for immediate updates, 1 for updates synchronized with the

 *                  vertical retrace.

 *  

 *  \return 0 on success, or -1 if setting the swap interval is not supported.

 *  

 *  \sa SDL_GL_GetSwapInterval()

 */

extern DECLSPEC int SDLCALL SDL_GL_SetSwapInterval(int interval);

/**

 *  \brief Get the swap interval for the current OpenGL context.

 *  

 *  \return 0 if there is no vertical retrace synchronization, 1 if the buffer 

 *          swap is synchronized with the vertical retrace, and -1 if getting 

 *          the swap interval is not supported.

 *  

 *  \sa SDL_GL_SetSwapInterval()

 */

extern DECLSPEC int SDLCALL SDL_GL_GetSwapInterval(void);

/**

 * \brief Swap the OpenGL buffers for a window, if double-buffering is 

 *        supported.

 */

extern DECLSPEC void SDLCALL SDL_GL_SwapWindow(SDL_Window * window);

/**

 *  \brief Delete an OpenGL context.

 *  

 *  \sa SDL_GL_CreateContext()

 */

extern DECLSPEC void SDLCALL SDL_GL_DeleteContext(SDL_GLContext context);

/*@}*//*OpenGL support functions*/

/* Ends C function definitions when using C++ */

#ifdef __cplusplus

/* *INDENT-OFF* */

}

/* *INDENT-ON* */

#endif

#include "close_code.h"

#endif /* _SDL_video_h */

/* vi: set ts=4 sw=4 expandtab: */