/
SDL_render_sw.c
883 lines (761 loc) · 30.7 KB
1
2
/*
Simple DirectMedia Layer
3
Copyright (C) 1997-2019 Sam Lantinga <slouken@libsdl.org>
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/
#include "../../SDL_internal.h"
#if !SDL_RENDER_DISABLED
#include "../SDL_sysrender.h"
#include "SDL_render_sw_c.h"
#include "SDL_hints.h"
28
#include "SDL_assert.h"
29
30
31
32
33
34
35
36
37
38
39
#include "SDL_draw.h"
#include "SDL_blendfillrect.h"
#include "SDL_blendline.h"
#include "SDL_blendpoint.h"
#include "SDL_drawline.h"
#include "SDL_drawpoint.h"
#include "SDL_rotate.h"
/* SDL surface based renderer implementation */
40
41
42
43
44
45
46
typedef struct
{
const SDL_Rect *viewport;
const SDL_Rect *cliprect;
SDL_bool surface_cliprect_dirty;
} SW_DrawStateCache;
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
typedef struct
{
SDL_Surface *surface;
SDL_Surface *window;
} SW_RenderData;
static SDL_Surface *
SW_ActivateRenderer(SDL_Renderer * renderer)
{
SW_RenderData *data = (SW_RenderData *) renderer->driverdata;
if (!data->surface) {
data->surface = data->window;
}
if (!data->surface) {
SDL_Surface *surface = SDL_GetWindowSurface(renderer->window);
if (surface) {
data->surface = data->window = surface;
}
}
return data->surface;
}
static void
SW_WindowEvent(SDL_Renderer * renderer, const SDL_WindowEvent *event)
{
SW_RenderData *data = (SW_RenderData *) renderer->driverdata;
if (event->event == SDL_WINDOWEVENT_SIZE_CHANGED) {
data->surface = NULL;
data->window = NULL;
}
}
static int
SW_GetOutputSize(SDL_Renderer * renderer, int *w, int *h)
{
SDL_Surface *surface = SW_ActivateRenderer(renderer);
if (surface) {
if (w) {
*w = surface->w;
}
if (h) {
*h = surface->h;
}
return 0;
} else {
SDL_SetError("Software renderer doesn't have an output surface");
return -1;
}
}
static int
SW_CreateTexture(SDL_Renderer * renderer, SDL_Texture * texture)
{
int bpp;
Uint32 Rmask, Gmask, Bmask, Amask;
if (!SDL_PixelFormatEnumToMasks
(texture->format, &bpp, &Rmask, &Gmask, &Bmask, &Amask)) {
return SDL_SetError("Unknown texture format");
}
texture->driverdata =
SDL_CreateRGBSurface(0, texture->w, texture->h, bpp, Rmask, Gmask,
Bmask, Amask);
SDL_SetSurfaceColorMod(texture->driverdata, texture->r, texture->g,
texture->b);
SDL_SetSurfaceAlphaMod(texture->driverdata, texture->a);
SDL_SetSurfaceBlendMode(texture->driverdata, texture->blendMode);
120
121
122
123
/* Only RLE encode textures without an alpha channel since the RLE coder
* discards the color values of pixels with an alpha value of zero.
*/
if (texture->access == SDL_TEXTUREACCESS_STATIC && !Amask) {
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
SDL_SetSurfaceRLE(texture->driverdata, 1);
}
if (!texture->driverdata) {
return -1;
}
return 0;
}
static int
SW_UpdateTexture(SDL_Renderer * renderer, SDL_Texture * texture,
const SDL_Rect * rect, const void *pixels, int pitch)
{
SDL_Surface *surface = (SDL_Surface *) texture->driverdata;
Uint8 *src, *dst;
int row;
size_t length;
if(SDL_MUSTLOCK(surface))
SDL_LockSurface(surface);
src = (Uint8 *) pixels;
dst = (Uint8 *) surface->pixels +
rect->y * surface->pitch +
rect->x * surface->format->BytesPerPixel;
length = rect->w * surface->format->BytesPerPixel;
for (row = 0; row < rect->h; ++row) {
SDL_memcpy(dst, src, length);
src += pitch;
dst += surface->pitch;
}
if(SDL_MUSTLOCK(surface))
SDL_UnlockSurface(surface);
return 0;
}
static int
SW_LockTexture(SDL_Renderer * renderer, SDL_Texture * texture,
const SDL_Rect * rect, void **pixels, int *pitch)
{
SDL_Surface *surface = (SDL_Surface *) texture->driverdata;
*pixels =
(void *) ((Uint8 *) surface->pixels + rect->y * surface->pitch +
rect->x * surface->format->BytesPerPixel);
*pitch = surface->pitch;
return 0;
}
static void
SW_UnlockTexture(SDL_Renderer * renderer, SDL_Texture * texture)
{
}
static int
SW_SetRenderTarget(SDL_Renderer * renderer, SDL_Texture * texture)
{
SW_RenderData *data = (SW_RenderData *) renderer->driverdata;
if (texture ) {
data->surface = (SDL_Surface *) texture->driverdata;
} else {
data->surface = data->window;
}
return 0;
}
static int
191
SW_QueueSetViewport(SDL_Renderer * renderer, SDL_RenderCommand *cmd)
192
{
193
return 0; /* nothing to do in this backend. */
194
195
196
}
static int
197
SW_QueueDrawPoints(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FPoint * points, int count)
198
{
199
SDL_Point *verts = (SDL_Point *) SDL_AllocateRenderVertices(renderer, count * sizeof (SDL_Point), 0, &cmd->data.draw.first);
200
int i;
201
202
if (!verts) {
203
204
205
return -1;
}
206
cmd->data.draw.count = count;
207
208
if (renderer->viewport.x || renderer->viewport.y) {
209
210
211
212
213
const int x = renderer->viewport.x;
const int y = renderer->viewport.y;
for (i = 0; i < count; i++, verts++, points++) {
verts->x = (int)(x + points->x);
verts->y = (int)(y + points->y);
214
215
}
} else {
216
217
218
for (i = 0; i < count; i++, verts++, points++) {
verts->x = (int)points->x;
verts->y = (int)points->y;
219
220
221
}
}
222
return 0;
223
224
225
}
static int
226
SW_QueueFillRects(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FRect * rects, int count)
227
{
228
SDL_Rect *verts = (SDL_Rect *) SDL_AllocateRenderVertices(renderer, count * sizeof (SDL_Rect), 0, &cmd->data.draw.first);
229
int i;
230
231
if (!verts) {
232
233
234
return -1;
}
235
cmd->data.draw.count = count;
236
237
238
239
240
241
242
243
244
245
if (renderer->viewport.x || renderer->viewport.y) {
const int x = renderer->viewport.x;
const int y = renderer->viewport.y;
for (i = 0; i < count; i++, verts++, rects++) {
verts->x = (int)(x + rects->x);
verts->y = (int)(y + rects->y);
verts->w = SDL_max((int)rects->w, 1);
verts->h = SDL_max((int)rects->h, 1);
246
247
}
} else {
248
249
250
251
252
for (i = 0; i < count; i++, verts++, rects++) {
verts->x = (int)rects->x;
verts->y = (int)rects->y;
verts->w = SDL_max((int)rects->w, 1);
verts->h = SDL_max((int)rects->h, 1);
253
254
255
}
}
256
return 0;
257
258
259
}
static int
260
261
SW_QueueCopy(SDL_Renderer * renderer, SDL_RenderCommand *cmd, SDL_Texture * texture,
const SDL_Rect * srcrect, const SDL_FRect * dstrect)
262
{
263
SDL_Rect *verts = (SDL_Rect *) SDL_AllocateRenderVertices(renderer, 2 * sizeof (SDL_Rect), 0, &cmd->data.draw.first);
264
265
if (!verts) {
266
267
268
return -1;
}
269
cmd->data.draw.count = 1;
270
271
272
273
274
275
276
SDL_memcpy(verts, srcrect, sizeof (SDL_Rect));
verts++;
if (renderer->viewport.x || renderer->viewport.y) {
verts->x = (int)(renderer->viewport.x + dstrect->x);
verts->y = (int)(renderer->viewport.y + dstrect->y);
277
} else {
278
279
verts->x = (int)dstrect->x;
verts->y = (int)dstrect->y;
280
}
281
282
verts->w = (int)dstrect->w;
verts->h = (int)dstrect->h;
283
284
return 0;
285
286
}
287
288
289
290
291
292
293
294
295
typedef struct CopyExData
{
SDL_Rect srcrect;
SDL_Rect dstrect;
double angle;
SDL_FPoint center;
SDL_RendererFlip flip;
} CopyExData;
296
static int
297
298
299
SW_QueueCopyEx(SDL_Renderer * renderer, SDL_RenderCommand *cmd, SDL_Texture * texture,
const SDL_Rect * srcrect, const SDL_FRect * dstrect,
const double angle, const SDL_FPoint *center, const SDL_RendererFlip flip)
300
{
301
CopyExData *verts = (CopyExData *) SDL_AllocateRenderVertices(renderer, sizeof (CopyExData), 0, &cmd->data.draw.first);
302
303
if (!verts) {
304
305
306
return -1;
}
307
308
309
310
cmd->data.draw.count = 1;
SDL_memcpy(&verts->srcrect, srcrect, sizeof (SDL_Rect));
311
if (renderer->viewport.x || renderer->viewport.y) {
312
313
verts->dstrect.x = (int)(renderer->viewport.x + dstrect->x);
verts->dstrect.y = (int)(renderer->viewport.y + dstrect->y);
314
} else {
315
316
verts->dstrect.x = (int)dstrect->x;
verts->dstrect.y = (int)dstrect->y;
317
}
318
319
320
321
322
verts->dstrect.w = (int)dstrect->w;
verts->dstrect.h = (int)dstrect->h;
verts->angle = angle;
SDL_memcpy(&verts->center, center, sizeof (SDL_FPoint));
verts->flip = flip;
323
324
return 0;
325
326
327
}
static int
328
329
SW_RenderCopyEx(SDL_Renderer * renderer, SDL_Surface *surface, SDL_Texture * texture,
const SDL_Rect * srcrect, const SDL_Rect * final_rect,
330
331
332
const double angle, const SDL_FPoint * center, const SDL_RendererFlip flip)
{
SDL_Surface *src = (SDL_Surface *) texture->driverdata;
333
SDL_Rect tmp_rect;
334
335
336
SDL_Surface *src_clone, *src_rotated, *src_scaled;
SDL_Surface *mask = NULL, *mask_rotated = NULL;
int retval = 0, dstwidth, dstheight, abscenterx, abscentery;
337
double cangle, sangle, px, py, p1x, p1y, p2x, p2y, p3x, p3y, p4x, p4y;
338
339
340
341
342
SDL_BlendMode blendmode;
Uint8 alphaMod, rMod, gMod, bMod;
int applyModulation = SDL_FALSE;
int blitRequired = SDL_FALSE;
int isOpaque = SDL_FALSE;
343
344
345
346
347
348
349
if (!surface) {
return -1;
}
tmp_rect.x = 0;
tmp_rect.y = 0;
350
351
tmp_rect.w = final_rect->w;
tmp_rect.h = final_rect->h;
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
/* It is possible to encounter an RLE encoded surface here and locking it is
* necessary because this code is going to access the pixel buffer directly.
*/
if (SDL_MUSTLOCK(src)) {
SDL_LockSurface(src);
}
/* Clone the source surface but use its pixel buffer directly.
* The original source surface must be treated as read-only.
*/
src_clone = SDL_CreateRGBSurfaceFrom(src->pixels, src->w, src->h, src->format->BitsPerPixel, src->pitch,
src->format->Rmask, src->format->Gmask,
src->format->Bmask, src->format->Amask);
if (src_clone == NULL) {
if (SDL_MUSTLOCK(src)) {
SDL_UnlockSurface(src);
369
}
370
371
372
373
374
375
376
377
378
379
380
381
382
return -1;
}
SDL_GetSurfaceBlendMode(src, &blendmode);
SDL_GetSurfaceAlphaMod(src, &alphaMod);
SDL_GetSurfaceColorMod(src, &rMod, &gMod, &bMod);
/* SDLgfx_rotateSurface only accepts 32-bit surfaces with a 8888 layout. Everything else has to be converted. */
if (src->format->BitsPerPixel != 32 || SDL_PIXELLAYOUT(src->format->format) != SDL_PACKEDLAYOUT_8888 || !src->format->Amask) {
blitRequired = SDL_TRUE;
}
/* If scaling and cropping is necessary, it has to be taken care of before the rotation. */
383
if (!(srcrect->w == final_rect->w && srcrect->h == final_rect->h && srcrect->x == 0 && srcrect->y == 0)) {
384
385
386
blitRequired = SDL_TRUE;
}
387
388
389
390
391
/* srcrect is not selecting the whole src surface, so cropping is needed */
if (!(srcrect->w == src->w && srcrect->h == src->h && srcrect->x == 0 && srcrect->y == 0)) {
blitRequired = SDL_TRUE;
}
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
/* The color and alpha modulation has to be applied before the rotation when using the NONE and MOD blend modes. */
if ((blendmode == SDL_BLENDMODE_NONE || blendmode == SDL_BLENDMODE_MOD) && (alphaMod & rMod & gMod & bMod) != 255) {
applyModulation = SDL_TRUE;
SDL_SetSurfaceAlphaMod(src_clone, alphaMod);
SDL_SetSurfaceColorMod(src_clone, rMod, gMod, bMod);
}
/* Opaque surfaces are much easier to handle with the NONE blend mode. */
if (blendmode == SDL_BLENDMODE_NONE && !src->format->Amask && alphaMod == 255) {
isOpaque = SDL_TRUE;
}
/* The NONE blend mode requires a mask for non-opaque surfaces. This mask will be used
* to clear the pixels in the destination surface. The other steps are explained below.
*/
if (blendmode == SDL_BLENDMODE_NONE && !isOpaque) {
408
mask = SDL_CreateRGBSurface(0, final_rect->w, final_rect->h, 32,
409
410
411
412
413
0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000);
if (mask == NULL) {
retval = -1;
} else {
SDL_SetSurfaceBlendMode(mask, SDL_BLENDMODE_MOD);
414
}
415
}
416
417
418
419
420
421
/* Create a new surface should there be a format mismatch or if scaling, cropping,
* or modulation is required. It's possible to use the source surface directly otherwise.
*/
if (!retval && (blitRequired || applyModulation)) {
SDL_Rect scale_rect = tmp_rect;
422
src_scaled = SDL_CreateRGBSurface(0, final_rect->w, final_rect->h, 32,
423
424
425
426
427
428
429
430
431
0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000);
if (src_scaled == NULL) {
retval = -1;
} else {
SDL_SetSurfaceBlendMode(src_clone, SDL_BLENDMODE_NONE);
retval = SDL_BlitScaled(src_clone, srcrect, src_scaled, &scale_rect);
SDL_FreeSurface(src_clone);
src_clone = src_scaled;
src_scaled = NULL;
432
433
434
}
}
435
436
437
/* SDLgfx_rotateSurface is going to make decisions depending on the blend mode. */
SDL_SetSurfaceBlendMode(src_clone, blendmode);
438
if (!retval) {
439
SDLgfx_rotozoomSurfaceSizeTrig(tmp_rect.w, tmp_rect.h, angle, &dstwidth, &dstheight, &cangle, &sangle);
440
src_rotated = SDLgfx_rotateSurface(src_clone, angle, dstwidth/2, dstheight/2, (texture->scaleMode == SDL_ScaleModeNearest) ? 0 : 1, flip & SDL_FLIP_HORIZONTAL, flip & SDL_FLIP_VERTICAL, dstwidth, dstheight, cangle, sangle);
441
442
443
444
445
446
447
448
449
450
451
if (src_rotated == NULL) {
retval = -1;
}
if (!retval && mask != NULL) {
/* The mask needed for the NONE blend mode gets rotated with the same parameters. */
mask_rotated = SDLgfx_rotateSurface(mask, angle, dstwidth/2, dstheight/2, SDL_FALSE, 0, 0, dstwidth, dstheight, cangle, sangle);
if (mask_rotated == NULL) {
retval = -1;
}
}
if (!retval) {
452
/* Find out where the new origin is by rotating the four final_rect points around the center and then taking the extremes */
453
454
abscenterx = final_rect->x + (int)center->x;
abscentery = final_rect->y + (int)center->y;
455
456
457
458
/* Compensate the angle inversion to match the behaviour of the other backends */
sangle = -sangle;
/* Top Left */
459
460
px = final_rect->x - abscenterx;
py = final_rect->y - abscentery;
461
462
463
464
p1x = px * cangle - py * sangle + abscenterx;
p1y = px * sangle + py * cangle + abscentery;
/* Top Right */
465
466
px = final_rect->x + final_rect->w - abscenterx;
py = final_rect->y - abscentery;
467
468
469
470
p2x = px * cangle - py * sangle + abscenterx;
p2y = px * sangle + py * cangle + abscentery;
/* Bottom Left */
471
472
px = final_rect->x - abscenterx;
py = final_rect->y + final_rect->h - abscentery;
473
474
475
476
p3x = px * cangle - py * sangle + abscenterx;
p3y = px * sangle + py * cangle + abscentery;
/* Bottom Right */
477
478
px = final_rect->x + final_rect->w - abscenterx;
py = final_rect->y + final_rect->h - abscentery;
479
480
481
482
483
484
485
486
p4x = px * cangle - py * sangle + abscenterx;
p4y = px * sangle + py * cangle + abscentery;
tmp_rect.x = (int)MIN(MIN(p1x, p2x), MIN(p3x, p4x));
tmp_rect.y = (int)MIN(MIN(p1y, p2y), MIN(p3y, p4y));
tmp_rect.w = dstwidth;
tmp_rect.h = dstheight;
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
/* The NONE blend mode needs some special care with non-opaque surfaces.
* Other blend modes or opaque surfaces can be blitted directly.
*/
if (blendmode != SDL_BLENDMODE_NONE || isOpaque) {
if (applyModulation == SDL_FALSE) {
/* If the modulation wasn't already applied, make it happen now. */
SDL_SetSurfaceAlphaMod(src_rotated, alphaMod);
SDL_SetSurfaceColorMod(src_rotated, rMod, gMod, bMod);
}
retval = SDL_BlitSurface(src_rotated, NULL, surface, &tmp_rect);
} else {
/* The NONE blend mode requires three steps to get the pixels onto the destination surface.
* First, the area where the rotated pixels will be blitted to get set to zero.
* This is accomplished by simply blitting a mask with the NONE blend mode.
* The colorkey set by the rotate function will discard the correct pixels.
*/
SDL_Rect mask_rect = tmp_rect;
SDL_SetSurfaceBlendMode(mask_rotated, SDL_BLENDMODE_NONE);
retval = SDL_BlitSurface(mask_rotated, NULL, surface, &mask_rect);
if (!retval) {
/* The next step copies the alpha value. This is done with the BLEND blend mode and
* by modulating the source colors with 0. Since the destination is all zeros, this
* will effectively set the destination alpha to the source alpha.
*/
SDL_SetSurfaceColorMod(src_rotated, 0, 0, 0);
mask_rect = tmp_rect;
retval = SDL_BlitSurface(src_rotated, NULL, surface, &mask_rect);
if (!retval) {
/* The last step gets the color values in place. The ADD blend mode simply adds them to
* the destination (where the color values are all zero). However, because the ADD blend
* mode modulates the colors with the alpha channel, a surface without an alpha mask needs
* to be created. This makes all source pixels opaque and the colors get copied correctly.
*/
SDL_Surface *src_rotated_rgb;
src_rotated_rgb = SDL_CreateRGBSurfaceFrom(src_rotated->pixels, src_rotated->w, src_rotated->h,
src_rotated->format->BitsPerPixel, src_rotated->pitch,
src_rotated->format->Rmask, src_rotated->format->Gmask,
src_rotated->format->Bmask, 0);
if (src_rotated_rgb == NULL) {
retval = -1;
} else {
SDL_SetSurfaceBlendMode(src_rotated_rgb, SDL_BLENDMODE_ADD);
retval = SDL_BlitSurface(src_rotated_rgb, NULL, surface, &tmp_rect);
SDL_FreeSurface(src_rotated_rgb);
}
}
}
SDL_FreeSurface(mask_rotated);
}
if (src_rotated != NULL) {
SDL_FreeSurface(src_rotated);
}
539
540
541
}
}
542
543
544
545
546
547
548
549
if (SDL_MUSTLOCK(src)) {
SDL_UnlockSurface(src);
}
if (mask != NULL) {
SDL_FreeSurface(mask);
}
if (src_clone != NULL) {
SDL_FreeSurface(src_clone);
550
551
552
553
}
return retval;
}
554
555
556
557
558
559
560
561
562
563
static void
PrepTextureForCopy(const SDL_RenderCommand *cmd)
{
const Uint8 r = cmd->data.draw.r;
const Uint8 g = cmd->data.draw.g;
const Uint8 b = cmd->data.draw.b;
const Uint8 a = cmd->data.draw.a;
const SDL_BlendMode blend = cmd->data.draw.blend;
SDL_Texture *texture = cmd->data.draw.texture;
SDL_Surface *surface = (SDL_Surface *) texture->driverdata;
564
565
566
const SDL_bool colormod = ((r & g & b) != 0xFF);
const SDL_bool alphamod = (a != 0xFF);
const SDL_bool blending = ((blend == SDL_BLENDMODE_ADD) || (blend == SDL_BLENDMODE_MOD));
567
568
if (colormod || alphamod || blending) {
569
570
571
SDL_SetSurfaceRLE(surface, 0);
}
572
573
574
/* !!! FIXME: we can probably avoid some of these calls. */
SDL_SetSurfaceColorMod(surface, r, g, b);
SDL_SetSurfaceAlphaMod(surface, a);
575
576
577
SDL_SetSurfaceBlendMode(surface, blend);
}
578
579
580
static void
SetDrawState(SDL_Surface *surface, SW_DrawStateCache *drawstate)
{
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
if (drawstate->surface_cliprect_dirty) {
const SDL_Rect *viewport = drawstate->viewport;
const SDL_Rect *cliprect = drawstate->cliprect;
SDL_assert(viewport != NULL); /* the higher level should have forced a SDL_RENDERCMD_SETVIEWPORT */
if (cliprect != NULL) {
SDL_Rect clip_rect;
clip_rect.x = cliprect->x + viewport->x;
clip_rect.y = cliprect->y + viewport->y;
clip_rect.w = cliprect->w;
clip_rect.h = cliprect->h;
SDL_IntersectRect(viewport, &clip_rect, &clip_rect);
SDL_SetClipRect(surface, &clip_rect);
} else {
SDL_SetClipRect(surface, drawstate->viewport);
596
}
597
drawstate->surface_cliprect_dirty = SDL_FALSE;
598
599
600
}
}
601
602
603
604
static int
SW_RunCommandQueue(SDL_Renderer * renderer, SDL_RenderCommand *cmd, void *vertices, size_t vertsize)
{
SDL_Surface *surface = SW_ActivateRenderer(renderer);
605
SW_DrawStateCache drawstate;
606
607
608
609
610
if (!surface) {
return -1;
}
611
612
613
614
drawstate.viewport = NULL;
drawstate.cliprect = NULL;
drawstate.surface_cliprect_dirty = SDL_TRUE;
615
616
617
618
619
620
621
while (cmd) {
switch (cmd->command) {
case SDL_RENDERCMD_SETDRAWCOLOR: {
break; /* Not used in this backend. */
}
case SDL_RENDERCMD_SETVIEWPORT: {
622
623
drawstate.viewport = &cmd->data.viewport.rect;
drawstate.surface_cliprect_dirty = SDL_TRUE;
624
625
626
627
break;
}
case SDL_RENDERCMD_SETCLIPRECT: {
628
629
drawstate.cliprect = cmd->data.cliprect.enabled ? &cmd->data.cliprect.rect : NULL;
drawstate.surface_cliprect_dirty = SDL_TRUE;
630
631
632
633
634
635
636
637
638
639
640
break;
}
case SDL_RENDERCMD_CLEAR: {
const Uint8 r = cmd->data.color.r;
const Uint8 g = cmd->data.color.g;
const Uint8 b = cmd->data.color.b;
const Uint8 a = cmd->data.color.a;
/* By definition the clear ignores the clip rect */
SDL_SetClipRect(surface, NULL);
SDL_FillRect(surface, NULL, SDL_MapRGBA(surface->format, r, g, b, a));
641
drawstate.surface_cliprect_dirty = SDL_TRUE;
642
643
644
645
646
647
648
649
break;
}
case SDL_RENDERCMD_DRAW_POINTS: {
const Uint8 r = cmd->data.draw.r;
const Uint8 g = cmd->data.draw.g;
const Uint8 b = cmd->data.draw.b;
const Uint8 a = cmd->data.draw.a;
650
const int count = (int) cmd->data.draw.count;
651
652
const SDL_Point *verts = (SDL_Point *) (((Uint8 *) vertices) + cmd->data.draw.first);
const SDL_BlendMode blend = cmd->data.draw.blend;
653
SetDrawState(surface, &drawstate);
654
655
656
657
658
659
660
661
662
663
664
665
666
if (blend == SDL_BLENDMODE_NONE) {
SDL_DrawPoints(surface, verts, count, SDL_MapRGBA(surface->format, r, g, b, a));
} else {
SDL_BlendPoints(surface, verts, count, blend, r, g, b, a);
}
break;
}
case SDL_RENDERCMD_DRAW_LINES: {
const Uint8 r = cmd->data.draw.r;
const Uint8 g = cmd->data.draw.g;
const Uint8 b = cmd->data.draw.b;
const Uint8 a = cmd->data.draw.a;
667
const int count = (int) cmd->data.draw.count;
668
669
const SDL_Point *verts = (SDL_Point *) (((Uint8 *) vertices) + cmd->data.draw.first);
const SDL_BlendMode blend = cmd->data.draw.blend;
670
SetDrawState(surface, &drawstate);
671
672
673
674
675
676
677
678
679
680
681
682
683
if (blend == SDL_BLENDMODE_NONE) {
SDL_DrawLines(surface, verts, count, SDL_MapRGBA(surface->format, r, g, b, a));
} else {
SDL_BlendLines(surface, verts, count, blend, r, g, b, a);
}
break;
}
case SDL_RENDERCMD_FILL_RECTS: {
const Uint8 r = cmd->data.draw.r;
const Uint8 g = cmd->data.draw.g;
const Uint8 b = cmd->data.draw.b;
const Uint8 a = cmd->data.draw.a;
684
const int count = (int) cmd->data.draw.count;
685
686
const SDL_Rect *verts = (SDL_Rect *) (((Uint8 *) vertices) + cmd->data.draw.first);
const SDL_BlendMode blend = cmd->data.draw.blend;
687
SetDrawState(surface, &drawstate);
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
if (blend == SDL_BLENDMODE_NONE) {
SDL_FillRects(surface, verts, count, SDL_MapRGBA(surface->format, r, g, b, a));
} else {
SDL_BlendFillRects(surface, verts, count, blend, r, g, b, a);
}
break;
}
case SDL_RENDERCMD_COPY: {
SDL_Rect *verts = (SDL_Rect *) (((Uint8 *) vertices) + cmd->data.draw.first);
const SDL_Rect *srcrect = verts;
SDL_Rect *dstrect = verts + 1;
SDL_Texture *texture = cmd->data.draw.texture;
SDL_Surface *src = (SDL_Surface *) texture->driverdata;
703
704
SetDrawState(surface, &drawstate);
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
PrepTextureForCopy(cmd);
if ( srcrect->w == dstrect->w && srcrect->h == dstrect->h ) {
SDL_BlitSurface(src, srcrect, surface, dstrect);
} else {
/* If scaling is ever done, permanently disable RLE (which doesn't support scaling)
* to avoid potentially frequent RLE encoding/decoding.
*/
SDL_SetSurfaceRLE(surface, 0);
SDL_BlitScaled(src, srcrect, surface, dstrect);
}
break;
}
case SDL_RENDERCMD_COPY_EX: {
const CopyExData *copydata = (CopyExData *) (((Uint8 *) vertices) + cmd->data.draw.first);
721
SetDrawState(surface, &drawstate);
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
PrepTextureForCopy(cmd);
SW_RenderCopyEx(renderer, surface, cmd->data.draw.texture, ©data->srcrect,
©data->dstrect, copydata->angle, ©data->center, copydata->flip);
break;
}
case SDL_RENDERCMD_NO_OP:
break;
}
cmd = cmd->next;
}
return 0;
}
738
739
740
741
742
743
744
745
746
747
748
749
static int
SW_RenderReadPixels(SDL_Renderer * renderer, const SDL_Rect * rect,
Uint32 format, void * pixels, int pitch)
{
SDL_Surface *surface = SW_ActivateRenderer(renderer);
Uint32 src_format;
void *src_pixels;
if (!surface) {
return -1;
}
750
751
752
/* NOTE: The rect is already adjusted according to the viewport by
* SDL_RenderReadPixels.
*/
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
if (rect->x < 0 || rect->x+rect->w > surface->w ||
rect->y < 0 || rect->y+rect->h > surface->h) {
return SDL_SetError("Tried to read outside of surface bounds");
}
src_format = surface->format->format;
src_pixels = (void*)((Uint8 *) surface->pixels +
rect->y * surface->pitch +
rect->x * surface->format->BytesPerPixel);
return SDL_ConvertPixels(rect->w, rect->h,
src_format, src_pixels, surface->pitch,
format, pixels, pitch);
}
static void
SW_RenderPresent(SDL_Renderer * renderer)
{
SDL_Window *window = renderer->window;
if (window) {
SDL_UpdateWindowSurface(window);
}
}
static void
SW_DestroyTexture(SDL_Renderer * renderer, SDL_Texture * texture)
{
SDL_Surface *surface = (SDL_Surface *) texture->driverdata;
SDL_FreeSurface(surface);
}
static void
SW_DestroyRenderer(SDL_Renderer * renderer)
{
SW_RenderData *data = (SW_RenderData *) renderer->driverdata;
SDL_free(data);
SDL_free(renderer);
}
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
SDL_Renderer *
SW_CreateRendererForSurface(SDL_Surface * surface)
{
SDL_Renderer *renderer;
SW_RenderData *data;
if (!surface) {
SDL_SetError("Can't create renderer for NULL surface");
return NULL;
}
renderer = (SDL_Renderer *) SDL_calloc(1, sizeof(*renderer));
if (!renderer) {
SDL_OutOfMemory();
return NULL;
}
data = (SW_RenderData *) SDL_calloc(1, sizeof(*data));
if (!data) {
SW_DestroyRenderer(renderer);
SDL_OutOfMemory();
return NULL;
}
data->surface = surface;
data->window = surface;
renderer->WindowEvent = SW_WindowEvent;
renderer->GetOutputSize = SW_GetOutputSize;
renderer->CreateTexture = SW_CreateTexture;
renderer->UpdateTexture = SW_UpdateTexture;
renderer->LockTexture = SW_LockTexture;
renderer->UnlockTexture = SW_UnlockTexture;
renderer->SetRenderTarget = SW_SetRenderTarget;
renderer->QueueSetViewport = SW_QueueSetViewport;
renderer->QueueSetDrawColor = SW_QueueSetViewport; /* SetViewport and SetDrawColor are (currently) no-ops. */
renderer->QueueDrawPoints = SW_QueueDrawPoints;
renderer->QueueDrawLines = SW_QueueDrawPoints; /* lines and points queue vertices the same way. */
renderer->QueueFillRects = SW_QueueFillRects;
renderer->QueueCopy = SW_QueueCopy;
renderer->QueueCopyEx = SW_QueueCopyEx;
renderer->RunCommandQueue = SW_RunCommandQueue;
renderer->RenderReadPixels = SW_RenderReadPixels;
renderer->RenderPresent = SW_RenderPresent;
renderer->DestroyTexture = SW_DestroyTexture;
renderer->DestroyRenderer = SW_DestroyRenderer;
renderer->info = SW_RenderDriver.info;
renderer->driverdata = data;
SW_ActivateRenderer(renderer);
return renderer;
}
849
static SDL_Renderer *
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
SW_CreateRenderer(SDL_Window * window, Uint32 flags)
{
SDL_Surface *surface;
surface = SDL_GetWindowSurface(window);
if (!surface) {
return NULL;
}
return SW_CreateRendererForSurface(surface);
}
SDL_RenderDriver SW_RenderDriver = {
SW_CreateRenderer,
{
"software",
SDL_RENDERER_SOFTWARE | SDL_RENDERER_TARGETTEXTURE,
8,
{
SDL_PIXELFORMAT_ARGB8888,
SDL_PIXELFORMAT_ABGR8888,
SDL_PIXELFORMAT_RGBA8888,
SDL_PIXELFORMAT_BGRA8888,
SDL_PIXELFORMAT_RGB888,
SDL_PIXELFORMAT_BGR888,
SDL_PIXELFORMAT_RGB565,
SDL_PIXELFORMAT_RGB555
},
0,
0}
};
881
882
883
#endif /* !SDL_RENDER_DISABLED */
/* vi: set ts=4 sw=4 expandtab: */