/*

Simple DirectMedia Layer

This software is provided 'as-is', without any express or implied

warranty. In no event will the authors be held liable for any damages

arising from the use of this software.

Permission is granted to anyone to use this software for any purpose,

including commercial applications, and to alter it and redistribute it

freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not

claim that you wrote the original software. If you use this software

in a product, an acknowledgment in the product documentation would be

appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be

misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

*/

/**

* \file SDL_haptic.h

*

* devices.

*

* The basic usage is as follows:

* - Initialize the subsystem (::SDL_INIT_HAPTIC).

* - Open a haptic device.

* - SDL_HapticOpen() to open from index.

* - SDL_HapticOpenFromJoystick() to open from an existing joystick.

* - Create an effect (::SDL_HapticEffect).

* - Upload the effect with SDL_HapticNewEffect().

* - Run the effect with SDL_HapticRunEffect().

* - (optional) Free the effect with SDL_HapticDestroyEffect().

* - Close the haptic device with SDL_HapticClose().

*

* \par Simple rumble example:

* \code

* SDL_Haptic *haptic;

*

* // Open the device

* haptic = SDL_HapticOpen( 0 );

* if (haptic == NULL)

* return -1;

*

* // Initialize simple rumble

* if (SDL_HapticRumbleInit( haptic ) != 0)

* return -1;

*

* // Play effect at 50% strength for 2 seconds

* if (SDL_HapticRumblePlay( haptic, 0.5, 2000 ) != 0)

* return -1;

* SDL_Delay( 2000 );

*

* // Clean up

* SDL_HapticClose( haptic );

* \endcode

*

* \par Complete example:

* \code

* int test_haptic( SDL_Joystick * joystick ) {

* SDL_Haptic *haptic;

* SDL_HapticEffect effect;

* int effect_id;

*

* // Open the device

* haptic = SDL_HapticOpenFromJoystick( joystick );

* if (haptic == NULL) return -1; // Most likely joystick isn't haptic

*

* // See if it can do sine waves

* if ((SDL_HapticQuery(haptic) & SDL_HAPTIC_SINE)==0) {

* SDL_HapticClose(haptic); // No sine effect

* return -1;

* }

*

* // Create the effect

* memset( &effect, 0, sizeof(SDL_HapticEffect) ); // 0 is safe default

* effect.type = SDL_HAPTIC_SINE;

* effect.periodic.direction.type = SDL_HAPTIC_POLAR; // Polar coordinates

* effect.periodic.direction.dir[0] = 18000; // Force comes from south

* effect.periodic.period = 1000; // 1000 ms

* effect.periodic.magnitude = 20000; // 20000/32767 strength

* effect.periodic.length = 5000; // 5 seconds long

* effect.periodic.attack_length = 1000; // Takes 1 second to get max strength

* effect.periodic.fade_length = 1000; // Takes 1 second to fade away

*

* // Upload the effect

* effect_id = SDL_HapticNewEffect( haptic, &effect );

*

* // Test the effect

* SDL_HapticRunEffect( haptic, effect_id, 1 );

* SDL_Delay( 5000); // Wait for the effect to finish

*

* // We destroy the effect, although closing the device also does this

* SDL_HapticDestroyEffect( haptic, effect_id );

*

* // Close the device

* SDL_HapticClose(haptic);

*

* return 0; // Success

* }

* \endcode

*/

#ifndef SDL_haptic_h_

#define SDL_haptic_h_

#include "SDL_stdinc.h"

#include "SDL_error.h"

#include "SDL_joystick.h"

#include "begin_code.h"

/* Set up for C function definitions, even when using C++ */

#ifdef __cplusplus

extern "C" {

#endif /* __cplusplus */

/* FIXME: For SDL 2.1, adjust all the magnitude variables to be Uint16 (0xFFFF).

*

* At the moment the magnitude variables are mixed between signed/unsigned, and

* it is also not made clear that ALL of those variables expect a max of 0x7FFF.

*

* Some platforms may have higher precision than that (Linux FF, Windows XInput)

* so we should fix the inconsistency in favor of higher possible precision,

* adjusting for platforms that use different scales.

* -flibit

*/

/**

* \typedef SDL_Haptic

*

* \brief The haptic structure used to identify an SDL haptic.

*

* \sa SDL_HapticOpen

* \sa SDL_HapticOpenFromJoystick

* \sa SDL_HapticClose

*/

struct _SDL_Haptic;

typedef struct _SDL_Haptic SDL_Haptic;

/**

* \name Haptic features

*

* Different haptic features a device can have.

*/

/* @{ */

/**

* \name Haptic effects

*/

/* @{ */

/**

* \brief Constant effect supported.

*

* Constant haptic effect.

*

* \sa SDL_HapticCondition

*/

/**

* \brief Sine wave effect supported.

*

* Periodic haptic effect that simulates sine waves.

*

* \sa SDL_HapticPeriodic

*/

/**

* \brief Left/Right effect supported.

*

* Haptic effect for direct control over high/low frequency motors.

*

* \sa SDL_HapticLeftRight

* \warning this value was SDL_HAPTIC_SQUARE right before 2.0.0 shipped. Sorry,

* we ran out of bits, and this is important for XInput devices.

*/

/* !!! FIXME: put this back when we have more bits in 2.1 */

/* #define SDL_HAPTIC_SQUARE (1<<2) */

/**

* \brief Triangle wave effect supported.

*

* Periodic haptic effect that simulates triangular waves.

*

* \sa SDL_HapticPeriodic

*/

/**

* \brief Sawtoothup wave effect supported.

*

* Periodic haptic effect that simulates saw tooth up waves.

*

* \sa SDL_HapticPeriodic

*/

/**

* \brief Sawtoothdown wave effect supported.

*

* Periodic haptic effect that simulates saw tooth down waves.

*

* \sa SDL_HapticPeriodic

*/

/**

* \brief Ramp effect supported.

*

* Ramp haptic effect.

*

* \sa SDL_HapticRamp

*/

/**

* \brief Spring effect supported - uses axes position.

*

* Condition haptic effect that simulates a spring. Effect is based on the

* axes position.

*

* \sa SDL_HapticCondition

*/

/**

* \brief Damper effect supported - uses axes velocity.

*

* Condition haptic effect that simulates dampening. Effect is based on the

* axes velocity.

*

* \sa SDL_HapticCondition

*/

/**

* \brief Inertia effect supported - uses axes acceleration.

*

* Condition haptic effect that simulates inertia. Effect is based on the axes

* acceleration.

*

* \sa SDL_HapticCondition

*/

/**

* \brief Friction effect supported - uses axes movement.

*

* Condition haptic effect that simulates friction. Effect is based on the

* axes movement.

*

* \sa SDL_HapticCondition

*/

/**

* \brief Custom effect is supported.

*

* User defined custom haptic effect.

*/

/* @} *//* Haptic effects */

/* These last few are features the device has, not effects */

/**

* \brief Device can set global gain.

*

* Device supports setting the global gain.

*

* \sa SDL_HapticSetGain

*/

/**

* \brief Device can set autocenter.

*

* Device supports setting autocenter.

*

* \sa SDL_HapticSetAutocenter

*/

/**

* \brief Device can be queried for effect status.

*

*

* \sa SDL_HapticGetEffectStatus

*/

/**

* \brief Device can be paused.

*

* Devices supports being paused.

*

* \sa SDL_HapticPause

* \sa SDL_HapticUnpause

*/

/**

* \name Direction encodings

*/

/* @{ */

/**

* \brief Uses polar coordinates for the direction.

*

* \sa SDL_HapticDirection

*/

#define SDL_HAPTIC_POLAR 0

/**

* \brief Uses cartesian coordinates for the direction.

*

* \sa SDL_HapticDirection

*/

#define SDL_HAPTIC_CARTESIAN 1

/**

* \brief Uses spherical coordinates for the direction.

*

* \sa SDL_HapticDirection

*/

#define SDL_HAPTIC_SPHERICAL 2

/* @} *//* Direction encodings */

/* @} *//* Haptic features */

/*

* Misc defines.

*/

/**

* \brief Used to play a device an infinite number of times.

*

* \sa SDL_HapticRunEffect

*/

#define SDL_HAPTIC_INFINITY 4294967295U

/**

* \brief Structure that represents a haptic direction.

*

* This is the direction where the force comes from,

* instead of the direction in which the force is exerted.

*

* Directions can be specified by:

* - ::SDL_HAPTIC_POLAR : Specified by polar coordinates.

* - ::SDL_HAPTIC_CARTESIAN : Specified by cartesian coordinates.

* - ::SDL_HAPTIC_SPHERICAL : Specified by spherical coordinates.

*

* Cardinal directions of the haptic device are relative to the positioning

* of the device. North is considered to be away from the user.

*

* The following diagram represents the cardinal directions:

* \verbatim

.--.

|__| .-------.

|=.| |.-----.|

|--| || ||

| | |'-----'|

|__|~')_____('

[ COMPUTER ]

North (0,-1)

^

|

|

(-1,0) West <----[ HAPTIC ]----> East (1,0)

|

|

v

South (0,1)

[ USER ]

\|||/

(o o)

---ooO-(_)-Ooo---

\endverbatim

*

* If type is ::SDL_HAPTIC_POLAR, direction is encoded by hundredths of a

* degree starting north and turning clockwise. ::SDL_HAPTIC_POLAR only uses

* the first \c dir parameter. The cardinal directions would be:

* - North: 0 (0 degrees)

* - East: 9000 (90 degrees)

* - South: 18000 (180 degrees)

* - West: 27000 (270 degrees)

*

* If type is ::SDL_HAPTIC_CARTESIAN, direction is encoded by three positions

* (X axis, Y axis and Z axis (with 3 axes)). ::SDL_HAPTIC_CARTESIAN uses

* the first three \c dir parameters. The cardinal directions would be:

* - North: 0,-1, 0

* - East: 1, 0, 0

* - South: 0, 1, 0

* - West: -1, 0, 0

*

* The Z axis represents the height of the effect if supported, otherwise

* it's unused. In cartesian encoding (1, 2) would be the same as (2, 4), you

* can use any multiple you want, only the direction matters.

*

* If type is ::SDL_HAPTIC_SPHERICAL, direction is encoded by two rotations.

* The first two \c dir parameters are used. The \c dir parameters are as

* follows (all values are in hundredths of degrees):

* - Degrees from (1, 0) rotated towards (0, 1).

* - Degrees towards (0, 0, 1) (device needs at least 3 axes).

*

*

* Example of force coming from the south with all encodings (force coming

* from the south means the user will have to pull the stick to counteract):

* \code

* SDL_HapticDirection direction;

*

* // Cartesian directions

* direction.type = SDL_HAPTIC_CARTESIAN; // Using cartesian direction encoding.

* direction.dir[0] = 0; // X position

* direction.dir[1] = 1; // Y position

* // Assuming the device has 2 axes, we don't need to specify third parameter.

*

* // Polar directions

* direction.type = SDL_HAPTIC_POLAR; // We'll be using polar direction encoding.

* direction.dir[0] = 18000; // Polar only uses first parameter

*

* // Spherical coordinates

* direction.type = SDL_HAPTIC_SPHERICAL; // Spherical encoding

* direction.dir[0] = 9000; // Since we only have two axes we don't need more parameters.

* \endcode

*

* \sa SDL_HAPTIC_POLAR

* \sa SDL_HAPTIC_CARTESIAN

* \sa SDL_HAPTIC_SPHERICAL

* \sa SDL_HapticEffect

* \sa SDL_HapticNumAxes

*/

typedef struct SDL_HapticDirection

{

Uint8 type; /**< The type of encoding. */

Sint32 dir[3]; /**< The encoded direction. */

} SDL_HapticDirection;

/**

* \brief A structure containing a template for a Constant effect.

*

*

* A constant effect applies a constant force in the specified direction

* to the joystick.

*

* \sa SDL_HAPTIC_CONSTANT

* \sa SDL_HapticEffect

*/

typedef struct SDL_HapticConstant

{

/* Header */

Uint16 type; /**< ::SDL_HAPTIC_CONSTANT */

SDL_HapticDirection direction; /**< Direction of the effect. */

/* Replay */

Uint32 length; /**< Duration of the effect. */

Uint16 delay; /**< Delay before starting the effect. */

/* Trigger */

Uint16 button; /**< Button that triggers the effect. */

Uint16 interval; /**< How soon it can be triggered again after button. */

/* Constant */

Sint16 level; /**< Strength of the constant effect. */

/* Envelope */

Uint16 attack_length; /**< Duration of the attack. */

Uint16 attack_level; /**< Level at the start of the attack. */

Uint16 fade_length; /**< Duration of the fade. */

Uint16 fade_level; /**< Level at the end of the fade. */

} SDL_HapticConstant;

/**

* \brief A structure containing a template for a Periodic effect.

*

* The struct handles the following effects:

* - ::SDL_HAPTIC_SINE

* - ::SDL_HAPTIC_LEFTRIGHT

* - ::SDL_HAPTIC_TRIANGLE

* - ::SDL_HAPTIC_SAWTOOTHUP

* - ::SDL_HAPTIC_SAWTOOTHDOWN

*

* A periodic effect consists in a wave-shaped effect that repeats itself

* over time. The type determines the shape of the wave and the parameters

* determine the dimensions of the wave.

*

* Phase is given by hundredth of a degree meaning that giving the phase a value

* of 9000 will displace it 25% of its period. Here are sample values:

* - 0: No phase displacement.

* - 9000: Displaced 25% of its period.

* - 18000: Displaced 50% of its period.

* - 27000: Displaced 75% of its period.

* - 36000: Displaced 100% of its period, same as 0, but 0 is preferred.

*

* Examples:

* \verbatim

SDL_HAPTIC_SINE

__ __ __ __

/ \ / \ / \ /

/ \__/ \__/ \__/

SDL_HAPTIC_SQUARE

__ __ __ __ __

| | | | | | | | | |

| |__| |__| |__| |__| |

SDL_HAPTIC_TRIANGLE

/\ /\ /\ /\ /\

/ \ / \ / \ / \ /

/ \/ \/ \/ \/

SDL_HAPTIC_SAWTOOTHUP

/| /| /| /| /| /| /|

/ | / | / | / | / | / | / |

/ |/ |/ |/ |/ |/ |/ |

SDL_HAPTIC_SAWTOOTHDOWN

\ |\ |\ |\ |\ |\ |\ |

\ | \ | \ | \ | \ | \ | \ |

\| \| \| \| \| \| \|

\endverbatim

*

* \sa SDL_HAPTIC_SINE

* \sa SDL_HAPTIC_LEFTRIGHT

* \sa SDL_HAPTIC_TRIANGLE

* \sa SDL_HAPTIC_SAWTOOTHUP

* \sa SDL_HAPTIC_SAWTOOTHDOWN

* \sa SDL_HapticEffect

*/

typedef struct SDL_HapticPeriodic

{

/* Header */

Uint16 type; /**< ::SDL_HAPTIC_SINE, ::SDL_HAPTIC_LEFTRIGHT,

::SDL_HAPTIC_TRIANGLE, ::SDL_HAPTIC_SAWTOOTHUP or

::SDL_HAPTIC_SAWTOOTHDOWN */

SDL_HapticDirection direction; /**< Direction of the effect. */

/* Replay */

Uint32 length; /**< Duration of the effect. */

Uint16 delay; /**< Delay before starting the effect. */

/* Trigger */

Uint16 button; /**< Button that triggers the effect. */

Uint16 interval; /**< How soon it can be triggered again after button. */

/* Periodic */

Uint16 period; /**< Period of the wave. */

Sint16 magnitude; /**< Peak value; if negative, equivalent to 180 degrees extra phase shift. */

Sint16 offset; /**< Mean value of the wave. */

Uint16 phase; /**< Positive phase shift given by hundredth of a degree. */

/* Envelope */

Uint16 attack_length; /**< Duration of the attack. */

Uint16 attack_level; /**< Level at the start of the attack. */

Uint16 fade_length; /**< Duration of the fade. */

Uint16 fade_level; /**< Level at the end of the fade. */

} SDL_HapticPeriodic;

/**

* \brief A structure containing a template for a Condition effect.

*

* The struct handles the following effects:

* - ::SDL_HAPTIC_SPRING: Effect based on axes position.

* - ::SDL_HAPTIC_DAMPER: Effect based on axes velocity.

* - ::SDL_HAPTIC_INERTIA: Effect based on axes acceleration.

* - ::SDL_HAPTIC_FRICTION: Effect based on axes movement.

*

* Direction is handled by condition internals instead of a direction member.

* The condition effect specific members have three parameters. The first

* refers to the X axis, the second refers to the Y axis and the third

* refers to the Z axis. The right terms refer to the positive side of the

* axis and the left terms refer to the negative side of the axis. Please

* refer to the ::SDL_HapticDirection diagram for which side is positive and

* which is negative.

*

* \sa SDL_HapticDirection

* \sa SDL_HAPTIC_SPRING

* \sa SDL_HAPTIC_DAMPER

* \sa SDL_HAPTIC_INERTIA

* \sa SDL_HAPTIC_FRICTION

* \sa SDL_HapticEffect

*/

typedef struct SDL_HapticCondition

{

/* Header */

Uint16 type; /**< ::SDL_HAPTIC_SPRING, ::SDL_HAPTIC_DAMPER,

::SDL_HAPTIC_INERTIA or ::SDL_HAPTIC_FRICTION */

SDL_HapticDirection direction; /**< Direction of the effect - Not used ATM. */

/* Replay */

Uint32 length; /**< Duration of the effect. */

Uint16 delay; /**< Delay before starting the effect. */

/* Trigger */

Uint16 button; /**< Button that triggers the effect. */

Uint16 interval; /**< How soon it can be triggered again after button. */

/* Condition */

Uint16 right_sat[3]; /**< Level when joystick is to the positive side; max 0xFFFF. */

Uint16 left_sat[3]; /**< Level when joystick is to the negative side; max 0xFFFF. */

Sint16 right_coeff[3]; /**< How fast to increase the force towards the positive side. */

Sint16 left_coeff[3]; /**< How fast to increase the force towards the negative side. */

Uint16 deadband[3]; /**< Size of the dead zone; max 0xFFFF: whole axis-range when 0-centered. */

Sint16 center[3]; /**< Position of the dead zone. */

} SDL_HapticCondition;

/**

* \brief A structure containing a template for a Ramp effect.

*

* This struct is exclusively for the ::SDL_HAPTIC_RAMP effect.

*

* The ramp effect starts at start strength and ends at end strength.

* It augments in linear fashion. If you use attack and fade with a ramp

* the effects get added to the ramp effect making the effect become

* quadratic instead of linear.

*

* \sa SDL_HAPTIC_RAMP

* \sa SDL_HapticEffect

*/

typedef struct SDL_HapticRamp

{

/* Header */

Uint16 type; /**< ::SDL_HAPTIC_RAMP */

SDL_HapticDirection direction; /**< Direction of the effect. */

/* Replay */

Uint32 length; /**< Duration of the effect. */

Uint16 delay; /**< Delay before starting the effect. */

/* Trigger */

Uint16 button; /**< Button that triggers the effect. */

Uint16 interval; /**< How soon it can be triggered again after button. */

/* Ramp */

Sint16 start; /**< Beginning strength level. */

Sint16 end; /**< Ending strength level. */

/* Envelope */

Uint16 attack_length; /**< Duration of the attack. */

Uint16 attack_level; /**< Level at the start of the attack. */

Uint16 fade_length; /**< Duration of the fade. */

Uint16 fade_level; /**< Level at the end of the fade. */

} SDL_HapticRamp;

/**

* \brief A structure containing a template for a Left/Right effect.

*

* This struct is exclusively for the ::SDL_HAPTIC_LEFTRIGHT effect.

*

* The Left/Right effect is used to explicitly control the large and small

* motors, commonly found in modern game controllers. The small (right) motor

* is high frequency, and the large (left) motor is low frequency.

*

* \sa SDL_HAPTIC_LEFTRIGHT

* \sa SDL_HapticEffect

*/

typedef struct SDL_HapticLeftRight

{

/* Header */

Uint16 type; /**< ::SDL_HAPTIC_LEFTRIGHT */

/* Replay */

/* Rumble */

Uint16 large_magnitude; /**< Control of the large controller motor. */

Uint16 small_magnitude; /**< Control of the small controller motor. */

} SDL_HapticLeftRight;

/**

* \brief A structure containing a template for the ::SDL_HAPTIC_CUSTOM effect.

*

* This struct is exclusively for the ::SDL_HAPTIC_CUSTOM effect.

*

* A custom force feedback effect is much like a periodic effect, where the

* application can define its exact shape. You will have to allocate the

* data yourself. Data should consist of channels * samples Uint16 samples.

*

* If channels is one, the effect is rotated using the defined direction.

* Otherwise it uses the samples in data for the different axes.

*

* \sa SDL_HAPTIC_CUSTOM

* \sa SDL_HapticEffect

*/

typedef struct SDL_HapticCustom

{

/* Header */

Uint16 type; /**< ::SDL_HAPTIC_CUSTOM */

SDL_HapticDirection direction; /**< Direction of the effect. */

/* Replay */

Uint32 length; /**< Duration of the effect. */

Uint16 delay; /**< Delay before starting the effect. */

/* Trigger */

Uint16 button; /**< Button that triggers the effect. */

Uint16 interval; /**< How soon it can be triggered again after button. */

/* Custom */

Uint8 channels; /**< Axes to use, minimum of one. */

Uint16 period; /**< Sample periods. */

Uint16 samples; /**< Amount of samples. */

Uint16 *data; /**< Should contain channels*samples items. */

/* Envelope */

Uint16 attack_length; /**< Duration of the attack. */

Uint16 attack_level; /**< Level at the start of the attack. */

Uint16 fade_length; /**< Duration of the fade. */

Uint16 fade_level; /**< Level at the end of the fade. */

} SDL_HapticCustom;

/**

* \brief The generic template for any haptic effect.

*

* All values max at 32767 (0x7FFF). Signed values also can be negative.

* Time values unless specified otherwise are in milliseconds.

*

* You can also pass ::SDL_HAPTIC_INFINITY to length instead of a 0-32767

* value. Neither delay, interval, attack_length nor fade_length support

* ::SDL_HAPTIC_INFINITY. Fade will also not be used since effect never ends.

*

* Additionally, the ::SDL_HAPTIC_RAMP effect does not support a duration of

* ::SDL_HAPTIC_INFINITY.

*

* Button triggers may not be supported on all devices, it is advised to not

* use them if possible. Buttons start at index 1 instead of index 0 like

* the joystick.

*

* If both attack_length and fade_level are 0, the envelope is not used,

* otherwise both values are used.

*

* Common parts:

* \code

* // Replay - All effects have this

* Uint32 length; // Duration of effect (ms).

* Uint16 delay; // Delay before starting effect.

*

* // Trigger - All effects have this

* Uint16 button; // Button that triggers effect.

* Uint16 interval; // How soon before effect can be triggered again.

*

* // Envelope - All effects except condition effects have this

* Uint16 attack_length; // Duration of the attack (ms).

* Uint16 attack_level; // Level at the start of the attack.

* Uint16 fade_length; // Duration of the fade out (ms).

* Uint16 fade_level; // Level at the end of the fade.

* \endcode

*

*

* Here we have an example of a constant effect evolution in time:

* \verbatim

Strength

^

|

| effect level --> _________________

| / \

| / \

| / \

| / \

| attack_level --> | \

| | | <--- fade_level

|

+--------------------------------------------------> Time

[--] [---]

attack_length fade_length

[------------------][-----------------------]

delay length

\endverbatim

*

* Note either the attack_level or the fade_level may be above the actual

* effect level.

*

* \sa SDL_HapticConstant

* \sa SDL_HapticPeriodic

* \sa SDL_HapticCondition

* \sa SDL_HapticRamp

* \sa SDL_HapticLeftRight

* \sa SDL_HapticCustom

*/

typedef union SDL_HapticEffect

{

/* Common for all force feedback effects */

Uint16 type; /**< Effect type. */

SDL_HapticConstant constant; /**< Constant effect. */

SDL_HapticPeriodic periodic; /**< Periodic effect. */

SDL_HapticCondition condition; /**< Condition effect. */

SDL_HapticRamp ramp; /**< Ramp effect. */

SDL_HapticLeftRight leftright; /**< Left/Right effect. */

SDL_HapticCustom custom; /**< Custom effect. */

} SDL_HapticEffect;

/* Function prototypes */

/**

* \brief Count the number of haptic devices attached to the system.

*

* \return Number of haptic devices detected on the system.

*/

extern DECLSPEC int SDLCALL SDL_NumHaptics(void);

/**

*

* This can be called before any joysticks are opened.

* If no name can be found, this function returns NULL.

*

* \param device_index Index of the device to get its name.

* \return Name of the device or NULL on error.

*

* \sa SDL_NumHaptics

*/

extern DECLSPEC const char *SDLCALL SDL_HapticName(int device_index);

/**

* system.

*

* When opening a haptic device, its gain will be set to maximum and

* autocenter will be disabled. To modify these values use

* SDL_HapticSetGain() and SDL_HapticSetAutocenter().

*

* \param device_index Index of the device to open.

* \return Device identifier or NULL on error.

*

* \sa SDL_HapticIndex

* \sa SDL_HapticOpenFromMouse

* \sa SDL_HapticOpenFromJoystick

* \sa SDL_HapticClose

* \sa SDL_HapticSetGain

* \sa SDL_HapticSetAutocenter

* \sa SDL_HapticPause

* \sa SDL_HapticStopAll

*/

extern DECLSPEC SDL_Haptic *SDLCALL SDL_HapticOpen(int device_index);

/**

* \brief Checks if the haptic device at index has been opened.

*

* \param device_index Index to check to see if it has been opened.

* \return 1 if it has been opened or 0 if it hasn't.

*

* \sa SDL_HapticOpen

* \sa SDL_HapticIndex

*/

extern DECLSPEC int SDLCALL SDL_HapticOpened(int device_index);

/**

* \brief Gets the index of a haptic device.

*

* \param haptic Haptic device to get the index of.

* \return The index of the haptic device or -1 on error.

*

* \sa SDL_HapticOpen

* \sa SDL_HapticOpened

*/

extern DECLSPEC int SDLCALL SDL_HapticIndex(SDL_Haptic * haptic);

/**

* \brief Gets whether or not the current mouse has haptic capabilities.

*

* \return SDL_TRUE if the mouse is haptic, SDL_FALSE if it isn't.

*

* \sa SDL_HapticOpenFromMouse

*/

extern DECLSPEC int SDLCALL SDL_MouseIsHaptic(void);

/**

* \brief Tries to open a haptic device from the current mouse.

*

* \return The haptic device identifier or NULL on error.

*

* \sa SDL_MouseIsHaptic

* \sa SDL_HapticOpen

*/

extern DECLSPEC SDL_Haptic *SDLCALL SDL_HapticOpenFromMouse(void);

/**

* \brief Checks to see if a joystick has haptic features.

*

* \param joystick Joystick to test for haptic capabilities.

* \return SDL_TRUE if the joystick is haptic, SDL_FALSE if it isn't

* or -1 if an error occurred.

*

* \sa SDL_HapticOpenFromJoystick

*/

extern DECLSPEC int SDLCALL SDL_JoystickIsHaptic(SDL_Joystick * joystick);

/**

*

* You must still close the haptic device separately. It will not be closed

* with the joystick.

*

* When opening from a joystick you should first close the haptic device before

* closing the joystick device. If not, on some implementations the haptic

* device will also get unallocated and you'll be unable to use force feedback

* on that device.

*

* \param joystick Joystick to create a haptic device from.

* \return A valid haptic device identifier on success or NULL on error.

*

* \sa SDL_HapticOpen

* \sa SDL_HapticClose

*/

extern DECLSPEC SDL_Haptic *SDLCALL SDL_HapticOpenFromJoystick(SDL_Joystick *

joystick);

/**

*

* \param haptic Haptic device to close.

*/

extern DECLSPEC void SDLCALL SDL_HapticClose(SDL_Haptic * haptic);

/**

* \brief Returns the number of effects a haptic device can store.

*

* On some platforms this isn't fully supported, and therefore is an

* approximation. Always check to see if your created effect was actually

* created and do not rely solely on SDL_HapticNumEffects().

*

* \param haptic The haptic device to query effect max.

* \return The number of effects the haptic device can store or

* -1 on error.

*

* \sa SDL_HapticNumEffectsPlaying

* \sa SDL_HapticQuery

*/

extern DECLSPEC int SDLCALL SDL_HapticNumEffects(SDL_Haptic * haptic);

/**

* \brief Returns the number of effects a haptic device can play at the same

* time.

*

* This is not supported on all platforms, but will always return a value.

* Added here for the sake of completeness.

*

* \param haptic The haptic device to query maximum playing effects.

* \return The number of effects the haptic device can play at the same time

* or -1 on error.

*

* \sa SDL_HapticNumEffects

* \sa SDL_HapticQuery

*/

extern DECLSPEC int SDLCALL SDL_HapticNumEffectsPlaying(SDL_Haptic * haptic);

/**

* \brief Gets the haptic device's supported features in bitwise manner.

*

* Example:

* \code

* if (SDL_HapticQuery(haptic) & SDL_HAPTIC_CONSTANT) {

* }

* \endcode

*

* \param haptic The haptic device to query.

* \return Haptic features in bitwise manner (OR'd).

*

* \sa SDL_HapticNumEffects

* \sa SDL_HapticEffectSupported

*/

extern DECLSPEC unsigned int SDLCALL SDL_HapticQuery(SDL_Haptic * haptic);

/**

* \brief Gets the number of haptic axes the device has.

*

* \sa SDL_HapticDirection

*/

extern DECLSPEC int SDLCALL SDL_HapticNumAxes(SDL_Haptic * haptic);

/**

* \brief Checks to see if effect is supported by haptic.

*

* \param haptic Haptic device to check on.

* \param effect Effect to check to see if it is supported.

* \return SDL_TRUE if effect is supported, SDL_FALSE if it isn't or -1 on error.