# Makefile.in generated by automake 1.11.6 from Makefile.am.

# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software

# Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# libFLAC - Free Lossless Audio Codec library

# Copyright (C) 2001-2009 Josh Coalson

# Copyright (C) 2011-2013 Xiph.Org Foundation

#

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions

# are met:

#

# - Redistributions of source code must retain the above copyright

# notice, this list of conditions and the following disclaimer.

#

# - Redistributions in binary form must reproduce the above copyright

# notice, this list of conditions and the following disclaimer in the

# documentation and/or other materials provided with the distribution.

#

# - Neither the name of the Xiph.org Foundation nor the names of its

# contributors may be used to endorse or promote products derived from

# this software without specific prior written permission.

#

# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR

# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

VPATH = @srcdir@

am__make_dryrun = \

{ \

am__dry=no; \

case $$MAKEFLAGS in \

*\\[\ \ ]*) \

echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \

| grep '^AM OK$$' >/dev/null || am__dry=yes;; \

*) \

for am__flg in $$MAKEFLAGS; do \

case $$am__flg in \

*=*|--*) ;; \

*n*) am__dry=yes; break;; \

esac; \

done;; \

esac; \

test $$am__dry = yes; \

}

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

subdir = src/libFLAC/include

DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \

$(top_srcdir)/m4/bswap.m4 $(top_srcdir)/m4/gcc_version.m4 \

$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \

$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \

$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/ogg.m4 \

$(top_srcdir)/m4/stack_protect.m4 $(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

$(ACLOCAL_M4)

mkinstalldirs = $(install_sh) -d

CONFIG_HEADER = $(top_builddir)/config.h

CONFIG_CLEAN_FILES =

CONFIG_CLEAN_VPATH_FILES =

AM_V_GEN = $(am__v_GEN_@AM_V@)

am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)

am__v_GEN_0 = @echo " GEN " $@;

AM_V_at = $(am__v_at_@AM_V@)

am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)

am__v_at_0 = @

SOURCES =

DIST_SOURCES =

RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \

html-recursive info-recursive install-data-recursive \

install-dvi-recursive install-exec-recursive \

install-html-recursive install-info-recursive \

install-pdf-recursive install-ps-recursive install-recursive \

installcheck-recursive installdirs-recursive pdf-recursive \

ps-recursive uninstall-recursive

am__can_run_installinfo = \

case $$AM_UPDATE_INFO_DIR in \

n|no|NO) false;; \

*) (install-info --version) >/dev/null 2>&1;; \

esac

RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

distclean-recursive maintainer-clean-recursive

AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \

$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \

distdir

ETAGS = etags

CTAGS = ctags

DIST_SUBDIRS = $(SUBDIRS)

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

am__relativize = \

dir0=`pwd`; \

sed_first='s,^\([^/]*\)/.*$$,\1,'; \

sed_rest='s,^[^/]*/*,,'; \

sed_last='s,^.*/\([^/]*\)$$,\1,'; \

sed_butlast='s,/*[^/]*$$,,'; \

while test -n "$$dir1"; do \

first=`echo "$$dir1" | sed -e "$$sed_first"`; \

if test "$$first" != "."; then \

if test "$$first" = ".."; then \

dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

else \

first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

if test "$$first2" = "$$first"; then \

dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

else \

dir2="../$$dir2"; \

fi; \

dir0="$$dir0"/"$$first"; \

fi; \

fi; \

dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

done; \

reldir="$$dir2"

ACLOCAL = @ACLOCAL@

AMTAR = @AMTAR@

AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

AR = @AR@

AS = @AS@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

CC = @CC@

CCAS = @CCAS@

CCASDEPMODE = @CCASDEPMODE@

CCASFLAGS = @CCASFLAGS@

CCDEPMODE = @CCDEPMODE@

CFLAGS = @CFLAGS@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CYGPATH_W = @CYGPATH_W@

DEFS = @DEFS@

DEPDIR = @DEPDIR@

DLLTOOL = @DLLTOOL@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

EXEEXT = @EXEEXT@

FGREP = @FGREP@

GCC_MAJOR_VERSION = @GCC_MAJOR_VERSION@

GCC_MINOR_VERSION = @GCC_MINOR_VERSION@

GCC_VERSION = @GCC_VERSION@

GREP = @GREP@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LD = @LD@

LDFLAGS = @LDFLAGS@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LIBTOOL = @LIBTOOL@

LIPO = @LIPO@

LN_S = @LN_S@

LTLIBOBJS = @LTLIBOBJS@

LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@

MAINT = @MAINT@

MAKEINFO = @MAKEINFO@

MANIFEST_TOOL = @MANIFEST_TOOL@

MKDIR_P = @MKDIR_P@

NASM = @NASM@

NASM_ENCODER_FLAGS = @NASM_ENCODER_FLAGS@

NM = @NM@

NMEDIT = @NMEDIT@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OBJ_FORMAT = @OBJ_FORMAT@

OGG_CFLAGS = @OGG_CFLAGS@

OGG_LIBS = @OGG_LIBS@

OGG_PACKAGE = @OGG_PACKAGE@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

RANLIB = @RANLIB@

SED = @SED@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

VERSION = @VERSION@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_AR = @ac_ct_AR@

ac_ct_CC = @ac_ct_CC@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

runstatedir = @runstatedir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target_alias = @target_alias@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

SUBDIRS = private protected

all: all-recursive

.SUFFIXES:

$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)

@for dep in $?; do \

case '$(am__configure_deps)' in \

*$$dep*) \

( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

&& { if test -f $@; then exit 0; else break; fi; }; \

exit 1;; \

esac; \

done; \

echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/libFLAC/include/Makefile'; \

$(am__cd) $(top_srcdir) && \

$(AUTOMAKE) --foreign src/libFLAC/include/Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

@case '$?' in \

*config.status*) \

cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

*) \

echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(am__aclocal_m4_deps):

mostlyclean-libtool:

-rm -f *.lo

clean-libtool:

-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd

# into them and run `make' without going through this Makefile.

# To change the values of `make' variables: instead of editing Makefiles,

# (1) if the variable is set in `config.status', edit `config.status'

# (which will cause the Makefiles to be regenerated when you run `make');

# (2) otherwise, pass the desired values on the `make' command line.

$(RECURSIVE_TARGETS):

@fail= failcom='exit 1'; \

for f in x $$MAKEFLAGS; do \

case $$f in \

*=* | --[!k]*);; \

*k*) failcom='fail=yes';; \

esac; \

done; \

dot_seen=no; \

target=`echo $@ | sed s/-recursive//`; \

list='$(SUBDIRS)'; for subdir in $$list; do \

echo "Making $$target in $$subdir"; \

if test "$$subdir" = "."; then \

dot_seen=yes; \

local_target="$$target-am"; \

else \

local_target="$$target"; \

fi; \

($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

|| eval $$failcom; \

done; \

if test "$$dot_seen" = "no"; then \

$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):

@fail= failcom='exit 1'; \

for f in x $$MAKEFLAGS; do \

case $$f in \

*=* | --[!k]*);; \

*k*) failcom='fail=yes';; \

esac; \

done; \

dot_seen=no; \

case "$@" in \

distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

*) list='$(SUBDIRS)' ;; \

esac; \

rev=''; for subdir in $$list; do \

if test "$$subdir" = "."; then :; else \

rev="$$subdir $$rev"; \

fi; \

done; \

rev="$$rev ."; \

target=`echo $@ | sed s/-recursive//`; \

for subdir in $$rev; do \

echo "Making $$target in $$subdir"; \

if test "$$subdir" = "."; then \

local_target="$$target-am"; \

else \

local_target="$$target"; \

fi; \

($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

|| eval $$failcom; \

done && test -z "$$fail"

tags-recursive:

list='$(SUBDIRS)'; for subdir in $$list; do \

test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \

done

ctags-recursive:

list='$(SUBDIRS)'; for subdir in $$list; do \

test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \

done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

unique=`for i in $$list; do \

if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

done | \

$(AWK) '{ files[$$0] = 1; nonempty = 1; } \

END { if (nonempty) { for (i in files) print i; }; }'`; \

mkid -fID $$unique

tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \

$(TAGS_FILES) $(LISP)

set x; \

here=`pwd`; \

if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

include_option=--etags-include; \

empty_fix=.; \

else \

include_option=--include; \

empty_fix=; \

fi; \

list='$(SUBDIRS)'; for subdir in $$list; do \

if test "$$subdir" = .; then :; else \

test ! -f $$subdir/TAGS || \

set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \

fi; \

done; \

list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

unique=`for i in $$list; do \

if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

done | \

$(AWK) '{ files[$$0] = 1; nonempty = 1; } \

END { if (nonempty) { for (i in files) print i; }; }'`; \

shift; \

if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

test -n "$$unique" || unique=$$empty_fix; \

if test $$# -gt 0; then \

$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

"$$@" $$unique; \

else \

$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

$$unique; \

fi; \

fi

ctags: CTAGS

CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \

$(TAGS_FILES) $(LISP)

list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

unique=`for i in $$list; do \

if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

done | \

$(AWK) '{ files[$$0] = 1; nonempty = 1; } \

END { if (nonempty) { for (i in files) print i; }; }'`; \

test -z "$(CTAGS_ARGS)$$unique" \

|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

$$unique

GTAGS:

here=`$(am__cd) $(top_builddir) && pwd` \

&& $(am__cd) $(top_srcdir) \

&& gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:

-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)

@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

list='$(DISTFILES)'; \

dist_files=`for file in $$list; do echo $$file; done | \

sed -e "s|^$$srcdirstrip/||;t" \

-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

case $$dist_files in \

*/*) $(MKDIR_P) `echo "$$dist_files" | \

sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

sort -u` ;; \

esac; \

for file in $$dist_files; do \

if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

if test -d $$d/$$file; then \

dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

if test -d "$(distdir)/$$file"; then \

find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

fi; \

if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

fi; \

cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

else \

test -f "$(distdir)/$$file" \

|| cp -p $$d/$$file "$(distdir)/$$file" \

|| exit 1; \

fi; \

done

@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

if test "$$subdir" = .; then :; else \

$(am__make_dryrun) \

|| test -d "$(distdir)/$$subdir" \

|| $(MKDIR_P) "$(distdir)/$$subdir" \

|| exit 1; \

dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

$(am__relativize); \

new_distdir=$$reldir; \

dir1=$$subdir; dir2="$(top_distdir)"; \

$(am__relativize); \

new_top_distdir=$$reldir; \

echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

($(am__cd) $$subdir && \

$(MAKE) $(AM_MAKEFLAGS) \

top_distdir="$$new_top_distdir" \

distdir="$$new_distdir" \

am__remove_distdir=: \

am__skip_length_check=: \

am__skip_mode_fix=: \

distdir) \

|| exit 1; \

fi; \

done

check-am: all-am

check: check-recursive

all-am: Makefile

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

install-am: all-am

@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive

install-strip:

if test -z '$(STRIP)'; then \

$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

install; \

else \

$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \

fi

mostlyclean-generic:

clean-generic:

distclean-generic:

-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

@echo "This command is intended for maintainers to use"

@echo "it deletes files that may require special tools to rebuild."

clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive

-rm -f Makefile

distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

-rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \

install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \

all all-am check check-am clean clean-generic clean-libtool \

ctags ctags-recursive distclean distclean-generic \

distclean-libtool distclean-tags distdir dvi dvi-am html \

html-am info info-am install install-am install-data \

install-data-am install-dvi install-dvi-am install-exec \

install-exec-am install-html install-html-am install-info \

install-info-am install-man install-pdf install-pdf-am \

install-ps install-ps-am install-strip installcheck \

installcheck-am installdirs installdirs-am maintainer-clean \

maintainer-clean-generic mostlyclean mostlyclean-generic \

mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \

uninstall uninstall-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: