# Makefile.in generated by automake 1.16.1 from Makefile.am.

# @configure_input@

# Copyright (C) 1994-2018 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# FLAC - Free Lossless Audio Codec

# Copyright (C) 2001-2009 Josh Coalson

# Copyright (C) 2011-2016 Xiph.Org Foundation

#

# This file is part the FLAC project. FLAC is comprised of several

# components distributed under different licenses. The codec libraries

# are distributed under Xiph.Org's BSD-like license (see the file

# COPYING.Xiph in this distribution). All other programs, libraries, and

# plugins are distributed under the GPL (see COPYING.GPL). The documentation

# is distributed under the Gnu FDL (see COPYING.FDL). Each file in the

# FLAC distribution contains at the top the terms under which it may be

# distributed.

#

# Since this particular file is relevant to all components of FLAC,

# it may be distributed under the Xiph.Org license, which is the least

# restrictive of those mentioned above. See the file COPYING.Xiph in this

# distribution.

#

# automake provides the following useful targets:

#

# all: build all programs and libraries using the current

# configuration (set by configure)

#

# check: build and run all self-tests

#

# clean: remove everything except what's required to build everything

#

# distclean: remove everything except what goes in the distribution

#

VPATH = @srcdir@

am__is_gnu_make = { \

if test -z '$(MAKELEVEL)'; then \

false; \

elif test -n '$(MAKE_HOST)'; then \

true; \

elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \

true; \

else \

false; \

fi; \

}

am__make_running_with_option = \

case $${target_option-} in \

?) ;; \

*) echo "am__make_running_with_option: internal error: invalid" \

"target option '$${target_option-}' specified" >&2; \

exit 1;; \

esac; \

has_opt=no; \

sane_makeflags=$$MAKEFLAGS; \

if $(am__is_gnu_make); then \

sane_makeflags=$$MFLAGS; \

else \

case $$MAKEFLAGS in \

*\\[\ \ ]*) \

bs=\\; \

sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \

| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \

esac; \

fi; \

skip_next=no; \

strip_trailopt () \

{ \

flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \

}; \

for flg in $$sane_makeflags; do \

test $$skip_next = yes && { skip_next=no; continue; }; \

case $$flg in \

*=*|--*) continue;; \

-*I) strip_trailopt 'I'; skip_next=yes;; \

-*I?*) strip_trailopt 'I';; \

-*O) strip_trailopt 'O'; skip_next=yes;; \

-*O?*) strip_trailopt 'O';; \

-*l) strip_trailopt 'l'; skip_next=yes;; \

-*l?*) strip_trailopt 'l';; \

-[dEDm]) skip_next=yes;; \

-[JT]) skip_next=yes;; \

esac; \

case $$flg in \

*$$target_option*) has_opt=yes; break;; \

esac; \

done; \

test $$has_opt = yes

am__make_dryrun = (target_option=n; $(am__make_running_with_option))

am__make_keepgoing = (target_option=k; $(am__make_running_with_option))

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

@EXAMPLES_TRUE@am__append_1 = examples

subdir = .

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \

$(top_srcdir)/m4/add_cxxflags.m4 \

$(top_srcdir)/m4/ax_add_fortify_source.m4 \

$(top_srcdir)/m4/ax_check_enable_debug.m4 \

$(top_srcdir)/m4/bswap.m4 $(top_srcdir)/m4/c_attribute.m4 \

$(top_srcdir)/m4/clang.m4 $(top_srcdir)/m4/codeset.m4 \

$(top_srcdir)/m4/gcc_version.m4 $(top_srcdir)/m4/iconv.m4 \

$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \

$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \

$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \

$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \

$(top_srcdir)/m4/ogg.m4 $(top_srcdir)/m4/really_gcc.m4 \

$(top_srcdir)/m4/stack_protect.m4 $(top_srcdir)/m4/xmms.m4 \

$(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

$(ACLOCAL_M4)

DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \

$(am__configure_deps) $(am__DIST_COMMON)

am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \

configure.lineno config.status.lineno

mkinstalldirs = $(install_sh) -d

CONFIG_HEADER = config.h

CONFIG_CLEAN_FILES =

CONFIG_CLEAN_VPATH_FILES =

AM_V_P = $(am__v_P_@AM_V@)

am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)

am__v_P_0 = false

am__v_P_1 = :

AM_V_GEN = $(am__v_GEN_@AM_V@)

am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)

am__v_GEN_0 = @echo " GEN " $@;

am__v_GEN_1 =

AM_V_at = $(am__v_at_@AM_V@)

am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)

am__v_at_0 = @

am__v_at_1 =

SOURCES =

DIST_SOURCES =

RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \

ctags-recursive dvi-recursive html-recursive info-recursive \

install-data-recursive install-dvi-recursive \

install-exec-recursive install-html-recursive \

install-info-recursive install-pdf-recursive \

install-ps-recursive install-recursive installcheck-recursive \

installdirs-recursive pdf-recursive ps-recursive \

tags-recursive uninstall-recursive

am__can_run_installinfo = \

case $$AM_UPDATE_INFO_DIR in \

n|no|NO) false;; \

*) (install-info --version) >/dev/null 2>&1;; \

esac

RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

distclean-recursive maintainer-clean-recursive

am__recursive_targets = \

$(RECURSIVE_TARGETS) \

$(RECURSIVE_CLEAN_TARGETS) \

$(am__extra_recursive_targets)

AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \

cscope distdir distdir-am dist dist-all distcheck

am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \

$(LISP)config.h.in

# Read a list of newline-separated strings from the standard input,

# and print each of them once, without duplicates. Input order is

# *not* preserved.

am__uniquify_input = $(AWK) '\

BEGIN { nonempty = 0; } \

{ items[$$0] = 1; nonempty = 1; } \

END { if (nonempty) { for (i in items) print i; }; } \

'

# Make sure the list of sources is unique. This is necessary because,

# e.g., the same source file might be shared among _SOURCES variables

# for different programs/libraries.

am__define_uniq_tagged_files = \

list='$(am__tagged_files)'; \

unique=`for i in $$list; do \

if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

done | $(am__uniquify_input)`

ETAGS = etags

CTAGS = ctags

CSCOPE = cscope

DIST_SUBDIRS = doc include m4 man src test build objs microbench \

examples

am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \

README ar-lib compile config.guess config.rpath config.sub \

depcomp install-sh ltmain.sh missing

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

distdir = $(PACKAGE)-$(VERSION)

top_distdir = $(distdir)

am__remove_distdir = \

if test -d "$(distdir)"; then \

find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \

&& rm -rf "$(distdir)" \

|| { sleep 5 && rm -rf "$(distdir)"; }; \

else :; fi

am__post_remove_distdir = $(am__remove_distdir)

am__relativize = \

dir0=`pwd`; \

sed_first='s,^\([^/]*\)/.*$$,\1,'; \

sed_rest='s,^[^/]*/*,,'; \

sed_last='s,^.*/\([^/]*\)$$,\1,'; \

sed_butlast='s,/*[^/]*$$,,'; \

while test -n "$$dir1"; do \

first=`echo "$$dir1" | sed -e "$$sed_first"`; \

if test "$$first" != "."; then \

if test "$$first" = ".."; then \

dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

else \

first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

if test "$$first2" = "$$first"; then \

dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

else \

dir2="../$$dir2"; \

fi; \

dir0="$$dir0"/"$$first"; \

fi; \

fi; \

dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

done; \

reldir="$$dir2"

GZIP_ENV = --best

DIST_ARCHIVES = $(distdir).tar.xz

DIST_TARGETS = dist-xz

distuninstallcheck_listfiles = find . -type f -print

am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \

| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'

distcleancheck_listfiles = find . -type f -print

ACLOCAL = @ACLOCAL@

AMTAR = @AMTAR@

AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

AR = @AR@

AS = @AS@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

CC = @CC@

CCAS = @CCAS@

CCASDEPMODE = @CCASDEPMODE@

CCASFLAGS = @CCASFLAGS@

CCDEPMODE = @CCDEPMODE@

CFLAGS = @CFLAGS@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CXX = @CXX@

CXXCPP = @CXXCPP@

CXXDEPMODE = @CXXDEPMODE@

CXXFLAGS = @CXXFLAGS@

CYGPATH_W = @CYGPATH_W@

DEFS = @DEFS@

DEPDIR = @DEPDIR@

DLLTOOL = @DLLTOOL@

DOCBOOK_TO_MAN = @DOCBOOK_TO_MAN@

DOXYGEN = @DOXYGEN@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

ENABLE_64_BIT_WORDS = @ENABLE_64_BIT_WORDS@

EXEEXT = @EXEEXT@

FGREP = @FGREP@

FLAC__HAS_OGG = @FLAC__HAS_OGG@

FLAC__TEST_LEVEL = @FLAC__TEST_LEVEL@

FLAC__TEST_WITH_VALGRIND = @FLAC__TEST_WITH_VALGRIND@

GCC_MAJOR_VERSION = @GCC_MAJOR_VERSION@

GCC_MINOR_VERSION = @GCC_MINOR_VERSION@

GCC_VERSION = @GCC_VERSION@

GREP = @GREP@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LD = @LD@

LDFLAGS = @LDFLAGS@

LIBICONV = @LIBICONV@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LIBTOOL = @LIBTOOL@

LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@

LIPO = @LIPO@

LN_S = @LN_S@

LTLIBICONV = @LTLIBICONV@

LTLIBOBJS = @LTLIBOBJS@

LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@

MAKEINFO = @MAKEINFO@

MANIFEST_TOOL = @MANIFEST_TOOL@

MKDIR_P = @MKDIR_P@

NASM = @NASM@

NM = @NM@

NMEDIT = @NMEDIT@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OBJ_FORMAT = @OBJ_FORMAT@

OGG_CFLAGS = @OGG_CFLAGS@

OGG_LIBS = @OGG_LIBS@

OGG_PACKAGE = @OGG_PACKAGE@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

RANLIB = @RANLIB@

SED = @SED@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

VERSION = @VERSION@

XMMS_CFLAGS = @XMMS_CFLAGS@

XMMS_CONFIG = @XMMS_CONFIG@

XMMS_DATA_DIR = @XMMS_DATA_DIR@

XMMS_EFFECT_PLUGIN_DIR = @XMMS_EFFECT_PLUGIN_DIR@

XMMS_GENERAL_PLUGIN_DIR = @XMMS_GENERAL_PLUGIN_DIR@

XMMS_INPUT_PLUGIN_DIR = @XMMS_INPUT_PLUGIN_DIR@

XMMS_LIBS = @XMMS_LIBS@

XMMS_OUTPUT_PLUGIN_DIR = @XMMS_OUTPUT_PLUGIN_DIR@

XMMS_PLUGIN_DIR = @XMMS_PLUGIN_DIR@

XMMS_VERSION = @XMMS_VERSION@

XMMS_VISUALIZATION_PLUGIN_DIR = @XMMS_VISUALIZATION_PLUGIN_DIR@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_AR = @ac_ct_AR@

ac_ct_CC = @ac_ct_CC@

ac_ct_CXX = @ac_ct_CXX@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

runstatedir = @runstatedir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target_alias = @target_alias@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

ACLOCAL_AMFLAGS = -I m4

SUBDIRS = doc include m4 man src test build objs microbench \

$(am__append_1)

EXTRA_DIST = \

COPYING.FDL \

COPYING.GPL \

COPYING.LGPL \

COPYING.Xiph \

FLAC.sln \

FLAC-vs2005.sln \

Makefile.lite \

Makefile.deps \

autogen.sh \

config.rpath \

depcomp \

ltmain.sh \

strip_non_asm_libtool_args.sh

CLEANFILES = *~

all: config.h

$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:

am--refresh: Makefile

@:

$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)

@for dep in $?; do \

case '$(am__configure_deps)' in \

*$$dep*) \

echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \

$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \

&& exit 0; \

exit 1;; \

esac; \

done; \

echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \

$(am__cd) $(top_srcdir) && \

$(AUTOMAKE) --foreign Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

@case '$?' in \

*config.status*) \

echo ' $(SHELL) ./config.status'; \

$(SHELL) ./config.status;; \

*) \

echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \

cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \

esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: $(am__configure_deps)

$(am__cd) $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4): $(am__aclocal_m4_deps)

$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

$(am__aclocal_m4_deps):

config.h: stamp-h1

@test -f $@ || rm -f stamp-h1

@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status

@rm -f stamp-h1

cd $(top_builddir) && $(SHELL) ./config.status config.h

$(srcdir)/config.h.in: $(am__configure_deps)

($(am__cd) $(top_srcdir) && $(AUTOHEADER))

rm -f stamp-h1

touch $@

distclean-hdr:

-rm -f config.h stamp-h1

mostlyclean-libtool:

-rm -f *.lo

clean-libtool:

-rm -rf .libs _libs

distclean-libtool:

-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd

# into them and run 'make' without going through this Makefile.

# To change the values of 'make' variables: instead of editing Makefiles,

# (1) if the variable is set in 'config.status', edit 'config.status'

# (which will cause the Makefiles to be regenerated when you run 'make');

# (2) otherwise, pass the desired values on the 'make' command line.

$(am__recursive_targets):

@fail=; \

if $(am__make_keepgoing); then \

failcom='fail=yes'; \

else \

failcom='exit 1'; \

fi; \

dot_seen=no; \

target=`echo $@ | sed s/-recursive//`; \

case "$@" in \

distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

*) list='$(SUBDIRS)' ;; \

esac; \

for subdir in $$list; do \

echo "Making $$target in $$subdir"; \

if test "$$subdir" = "."; then \

dot_seen=yes; \

local_target="$$target-am"; \

else \

local_target="$$target"; \

fi; \

($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

|| eval $$failcom; \

done; \

if test "$$dot_seen" = "no"; then \

$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

fi; test -z "$$fail"

ID: $(am__tagged_files)

$(am__define_uniq_tagged_files); mkid -fID $$unique

tags: tags-recursive

TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

set x; \

here=`pwd`; \

if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

include_option=--etags-include; \

empty_fix=.; \

else \

include_option=--include; \

empty_fix=; \

fi; \

list='$(SUBDIRS)'; for subdir in $$list; do \

if test "$$subdir" = .; then :; else \

test ! -f $$subdir/TAGS || \

set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \

fi; \

done; \

$(am__define_uniq_tagged_files); \

shift; \

if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

test -n "$$unique" || unique=$$empty_fix; \

if test $$# -gt 0; then \

$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

"$$@" $$unique; \

else \

$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

$$unique; \

fi; \

fi

ctags: ctags-recursive

CTAGS: ctags

ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

$(am__define_uniq_tagged_files); \

test -z "$(CTAGS_ARGS)$$unique" \

|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

$$unique

GTAGS:

here=`$(am__cd) $(top_builddir) && pwd` \

&& $(am__cd) $(top_srcdir) \

&& gtags -i $(GTAGS_ARGS) "$$here"

cscope: cscope.files

test ! -s cscope.files \

|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)

clean-cscope:

-rm -f cscope.files

cscope.files: clean-cscope cscopelist

cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)

list='$(am__tagged_files)'; \

case "$(srcdir)" in \

[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \

*) sdir=$(subdir)/$(srcdir) ;; \

esac; \

for i in $$list; do \

if test -f "$$i"; then \

echo "$(subdir)/$$i"; \

else \

echo "$$sdir/$$i"; \

fi; \

done >> $(top_builddir)/cscope.files

distclean-tags:

-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(BUILT_SOURCES)

$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)

$(am__remove_distdir)

test -d "$(distdir)" || mkdir "$(distdir)"

@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

list='$(DISTFILES)'; \

dist_files=`for file in $$list; do echo $$file; done | \

sed -e "s|^$$srcdirstrip/||;t" \

-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

case $$dist_files in \

*/*) $(MKDIR_P) `echo "$$dist_files" | \

sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

sort -u` ;; \

esac; \

for file in $$dist_files; do \

if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

if test -d $$d/$$file; then \

dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

if test -d "$(distdir)/$$file"; then \

find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

fi; \

if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

fi; \

cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

else \

test -f "$(distdir)/$$file" \

|| cp -p $$d/$$file "$(distdir)/$$file" \

|| exit 1; \

fi; \

done

@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

if test "$$subdir" = .; then :; else \

$(am__make_dryrun) \

|| test -d "$(distdir)/$$subdir" \

|| $(MKDIR_P) "$(distdir)/$$subdir" \

|| exit 1; \

dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

$(am__relativize); \

new_distdir=$$reldir; \

dir1=$$subdir; dir2="$(top_distdir)"; \

$(am__relativize); \

new_top_distdir=$$reldir; \

echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

($(am__cd) $$subdir && \

$(MAKE) $(AM_MAKEFLAGS) \

top_distdir="$$new_top_distdir" \

distdir="$$new_distdir" \

am__remove_distdir=: \

am__skip_length_check=: \

am__skip_mode_fix=: \

distdir) \

|| exit 1; \

fi; \

done

-test -n "$(am__skip_mode_fix)" \

|| find "$(distdir)" -type d ! -perm -755 \

-exec chmod u+rwx,go+rx {} \; -o \

! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \

! -type d ! -perm -400 -exec chmod a+r {} \; -o \

! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \

|| chmod -R a+r "$(distdir)"

dist-gzip: distdir

tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz

$(am__post_remove_distdir)

dist-bzip2: distdir

tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2

$(am__post_remove_distdir)

dist-lzip: distdir

tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz

$(am__post_remove_distdir)

dist-xz: distdir

tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz

$(am__post_remove_distdir)

dist-tarZ: distdir

@echo WARNING: "Support for distribution archives compressed with" \

"legacy program 'compress' is deprecated." >&2

@echo WARNING: "It will be removed altogether in Automake 2.0" >&2

tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z

$(am__post_remove_distdir)

dist-shar: distdir

@echo WARNING: "Support for shar distribution archives is" \

"deprecated." >&2

@echo WARNING: "It will be removed altogether in Automake 2.0" >&2

shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz

$(am__post_remove_distdir)

dist-zip: distdir

-rm -f $(distdir).zip

zip -rq $(distdir).zip $(distdir)

$(am__post_remove_distdir)

dist dist-all:

$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'

$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration. Then

# it guarantees that the distribution is self-contained by making another

# tarfile.

distcheck: dist

case '$(DIST_ARCHIVES)' in \

*.tar.gz*) \

eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\

*.tar.bz2*) \

bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\

*.tar.lz*) \

lzip -dc $(distdir).tar.lz | $(am__untar) ;;\

*.tar.xz*) \

xz -dc $(distdir).tar.xz | $(am__untar) ;;\

*.tar.Z*) \

uncompress -c $(distdir).tar.Z | $(am__untar) ;;\

*.shar.gz*) \

eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\

*.zip*) \

unzip $(distdir).zip ;;\

esac

chmod -R a-w $(distdir)

chmod u+w $(distdir)

mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst

chmod a-w $(distdir)

test -d $(distdir)/_build || exit 0; \

dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \

&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \

&& am__cwd=`pwd` \

&& $(am__cd) $(distdir)/_build/sub \

&& ../../configure \

$(AM_DISTCHECK_CONFIGURE_FLAGS) \

$(DISTCHECK_CONFIGURE_FLAGS) \

--srcdir=../.. --prefix="$$dc_install_base" \

&& $(MAKE) $(AM_MAKEFLAGS) \

&& $(MAKE) $(AM_MAKEFLAGS) dvi \

&& $(MAKE) $(AM_MAKEFLAGS) check \

&& $(MAKE) $(AM_MAKEFLAGS) install \

&& $(MAKE) $(AM_MAKEFLAGS) installcheck \

&& $(MAKE) $(AM_MAKEFLAGS) uninstall \

&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \

distuninstallcheck \

&& chmod -R a-w "$$dc_install_base" \

&& ({ \

(cd ../.. && umask 077 && mkdir "$$dc_destdir") \

&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \

&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \

&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \

distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \

} || { rm -rf "$$dc_destdir"; exit 1; }) \

&& rm -rf "$$dc_destdir" \

&& $(MAKE) $(AM_MAKEFLAGS) dist \

&& rm -rf $(DIST_ARCHIVES) \

&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \

&& cd "$$am__cwd" \

|| exit 1

$(am__post_remove_distdir)

@(echo "$(distdir) archives ready for distribution: "; \

list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \

sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

distuninstallcheck:

@test -n '$(distuninstallcheck_dir)' || { \

echo 'ERROR: trying to run $@ with an empty' \

'$$(distuninstallcheck_dir)' >&2; \

exit 1; \

}; \

$(am__cd) '$(distuninstallcheck_dir)' || { \

echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \

exit 1; \

}; \

test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \

|| { echo "ERROR: files left after uninstall:" ; \

if test -n "$(DESTDIR)"; then \

echo " (check DESTDIR support)"; \

fi ; \

$(distuninstallcheck_listfiles) ; \

exit 1; } >&2

distcleancheck: distclean

@if test '$(srcdir)' = . ; then \

echo "ERROR: distcleancheck can only run from a VPATH build" ; \

exit 1 ; \

fi

@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \

|| { echo "ERROR: files left in build directory after distclean:" ; \

$(distcleancheck_listfiles) ; \

exit 1; } >&2

check-am: all-am

check: check-recursive

all-am: Makefile config.h

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

install-am: all-am

@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive

install-strip:

if test -z '$(STRIP)'; then \

$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

install; \

else \

$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \

fi

mostlyclean-generic:

clean-generic:

-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:

-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

@echo "This command is intended for maintainers to use"

@echo "it deletes files that may require special tools to rebuild."

clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive

-rm -f $(am__CONFIG_DISTCLEAN_FILES)

-rm -f Makefile

distclean-am: clean-am distclean-generic distclean-hdr \

distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

-rm -f $(am__CONFIG_DISTCLEAN_FILES)

-rm -rf $(top_srcdir)/autom4te.cache

-rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(am__recursive_targets) all install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \

am--refresh check check-am clean clean-cscope clean-generic \

clean-libtool cscope cscopelist-am ctags ctags-am dist \

dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \

dist-xz dist-zip distcheck distclean distclean-generic \

distclean-hdr distclean-libtool distclean-tags distcleancheck \

distdir distuninstallcheck dvi dvi-am html html-am info \

info-am install install-am install-data install-data-am \

install-dvi install-dvi-am install-exec install-exec-am \

install-html install-html-am install-info install-info-am \

install-man install-pdf install-pdf-am install-ps \

install-ps-am install-strip installcheck installcheck-am \

installdirs installdirs-am maintainer-clean \

maintainer-clean-generic mostlyclean mostlyclean-generic \

mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \

uninstall-am

.PRECIOUS: Makefile

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: