From 00f5d0d28d8c60dabf1042fcdc79fa4b2d377502 Mon Sep 17 00:00:00 2001 From: Sam Lantinga Date: Tue, 24 Mar 2009 10:33:12 +0000 Subject: [PATCH] Date: Mon, 23 Mar 2009 09:17:24 +0200 From: "Mike Gorchak" Subject: New QNX patches Please apply patch qnx4.diff, which is attached. What has been done: 1)Added back OpenGL ES renderer for QNX target. Added few corrections to OpenGL ES renderer to let it work under QNX. OpenGL ES renderer do not support textures under QNX, so I think some additional work must be done. 2) Added GL_OES_query_matrix extension to SDL_opengles.h header file, which required by OpenGL ES 1.1 specification. 3) Added attribute clearing at the entrance of function SDL_GL_GetAttribure(). Added error checking into the function SDL_GL_GetAttribure(), because some attributes can't be obtained in OpenGL ES 1.0. 4) Porting testdyngles to OpenGL ES 1.0 (1.1 has glColor4ub() and glColor4f() functions, but 1.0 has glColor4f() only). 5) Added error checking after obtaining attributes using SDL_GL_GetAttribute() function to the testgl2 and testgles. 6) Small correction to testmultiaudio with printing errors. 7) Added software and accelerated OpenGL ES 1.0 support into the QNX GF driver. Please remove ./src/audio/nto directory - it will not be used anymore. Please create ./src/audio/qsa directory and add content of the archive qsa.tar.gz into this directory. I rewrote some sound code, added support for multiple audio cards, enumeration, etc. Added initial support for capture. As far as I can understand SDL 1.3 is not supporting audio capture right now ? Sam, Am I right ? Or audio capture must be supported through the PlayDevice routine ? And last, please put file SDL_gf_opengles.c to the ./src/video/qnxgf directory. It is OpenGL ES 1.1 emulation layer for some functions, which are not supported by OpenGL ES 1.0. --- README.QNX | 103 +- configure.in | 8 +- include/SDL_config.h.in | 2 +- include/SDL_opengles.h | 6 + src/audio/SDL_audio.c | 6 +- src/audio/nto/SDL_nto_audio.c | 467 --------- src/audio/qsa/SDL_qsa_audio.c | 945 ++++++++++++++++++ .../SDL_nto_audio.h => qsa/SDL_qsa_audio.h} | 25 +- src/video/SDL_renderer_gles.c | 16 +- src/video/SDL_video.c | 43 +- src/video/qnxgf/SDL_gf_opengles.c | 56 ++ src/video/qnxgf/SDL_gf_render.c | 7 + src/video/qnxgf/SDL_qnxgf.c | 603 +++++++++-- src/video/qnxgf/SDL_qnxgf.h | 30 +- test/testdyngles.c | 18 +- test/testgl2.c | 61 +- test/testgles.c | 59 +- test/testmultiaudio.c | 2 +- 18 files changed, 1817 insertions(+), 640 deletions(-) delete mode 100644 src/audio/nto/SDL_nto_audio.c create mode 100644 src/audio/qsa/SDL_qsa_audio.c rename src/audio/{nto/SDL_nto_audio.h => qsa/SDL_qsa_audio.h} (75%) create mode 100644 src/video/qnxgf/SDL_gf_opengles.c diff --git a/README.QNX b/README.QNX index 8412a295a..a116c42dd 100644 --- a/README.QNX +++ b/README.QNX @@ -1,7 +1,38 @@ README.QNX by Mike Gorchak , -Last changed at 10 Mar 2009. +Last changed at 22 Mar 2009. -QNX Photon and GF drivers are under construction. Please be patient. +QNX Photon and GF drivers are being constructed. +QNX QSA (QNX Sound Architecture) driver is ready. +QNX CDROM driver is ready. +QNX HID input driver is being constructed. + +---------------------- + -- SDL QSA driver -- +---------------------- + + Due to QNX Sound Architecture limitations software could not determine +what playback channels are designed for, so some casus can be. For example, +output after testmultiaudio test utility execution: + +Using audio driver: qsa +playing on device #0: ('Vortex 8820 @ fb000000 d0')...done. +playing on device #1: ('Vortex 8820 @ fb000000 d1')...done. +playing on device #2: ('i8x0 @ d800 d0')...done. +playing on device #3: ('i8x0 @ d800 d1')...done. +playing on all devices... +Open device 3 failed: QSA: snd_pcm_channel_params failed: Invalid argument + +If speakers are connected to both audio cards: Vortex 8820 and Intel +Integrated Audio we can hear sound playback on device #0 and devices #2, #3 +only. Device #1 is an unknown PCM channel which does not produce any sound. + +As for error during device #3 opening, it's caused by QSA software mixer +channel, because it can't open real hardware device #2, since it's already +opened by SDL. + +After simultaneous sound playback on all devices utility testmultiaudio +stays running waiting for sound playback finish on device #1, which is +locked up due to some Aureal Vortex 8820 driver limitations. --------------------- -- SDL GF driver -- @@ -15,43 +46,61 @@ Here is an additional information about SDL GF driver: 0. Introduction. - SDL GF driver is a layer between SDL and QNX Graphics Framework (GF). Hardware -accelerated features which SDL could support depends on real hardware capabilities. + SDL GF driver is a layer between SDL and QNX Graphics Framework (GF). +SDL GF driver also supports OpenGL ES through the QNX Graphics Framework. +Hardware accelerated features which SDL can support depend on real hardware +capabilities. 1. Environment variables which GF driver supports. - GF driver supports the following environment variables for QNX GF specific -customization options: - a) SDL_VIDEO_GF_REFRESH_RATE - refresh rate of video output in Hz. Without - this environment variable declaration SDL controls refresh rate of your - display. If this enironment variable is set to 0, SDL will control refresh - rate of display, otherwise value of SDL_VIDEO_GF_REFRESH_RATE is used for - all screen resolutions as refresh rate. This example will set 60Hz refresh - rate as refresh rate for all graphics modes: + GF driver supports the following environment variables for QNX GF +specific customization options: + a) SDL_VIDEO_GF_REFRESH_RATE - refresh rate of video output in Hz. + Without this environment variable declaration SDL controls refresh + rate of your display. If this enironment variable is set to 0, SDL + will control refresh rate of display, otherwise value of flag + SDL_VIDEO_GF_REFRESH_RATE is used for all screen resolutions as + refresh rate. This example will set 60Hz refresh rate as refresh rate + for all graphics modes: export SDL_VIDEO_GF_REFRESH_RATE=60 2. Custom video modes. - Since most QNX graphics drivers supports GENERIC video modes, i.e. you could -specify any horizontal and vertical resolution and any refresh rate, SDL GF -driver uses its own fullscreen modes list, which could be incomplete. You could -add any custom video mode, which your QNX graphics driver supports by editing -file ./src/video/qnxgf/SDL_qnxgf.c. Custom graphics mode definition looks like + Since most QNX graphics drivers support GENERIC video modes, i.e. you +can specify any horizontal and vertical resolution and any refresh rate, +SDL GF driver uses its own fullscreen modes list, which can be incomplete. +You can add any custom video mode, which your QNX graphics driver supports +by editing file ./src/video/qnxgf/SDL_qnxgf.c. Custom graphics mode +definition looks like this: - {0, 1024, 640, 60, NULL}, /* 1024x640 mode is 60Hz only */ + {0, 1024, 640, 60, NULL}, /* 1024x640 mode is 60Hz only */ -You must specify horizontal resolution as second parameter, vertical resolution -as third parameter and refresh rate as fourth parameter. Please leave first and -last parameters as 0 and NULL. Then please send me your changes to e-mail address -which is specified in the header of this document. +You must specify horizontal resolution as the second parameter, vertical +resolution as the third one and refresh rate as the fourth parameter. +Please leave the first and the last parameters as 0 and NULL. Then send me +your changes to e-mail address which is specified in the header of this +document. 3. Limitations. There are few limitations while using SDL GF driver: - a) Since GF driver supports fullscreen modes only, when you are not specifing -SDL_WINDOW_FULLSCREEN flag, an SDL GF driver will try to find the fullscreen -graphics mode which corresponds to SDL window size. Refresh rate will be the -lowest available, if SDL_VIDEO_GF_REFRESH_RATE environment variable is not set. - + a) Since GF driver supports fullscreen modes only, when flag +SDL_WINDOW_FULLSCREEN is not specified, SDL GF driver will try to find the +fullscreen graphics mode which corresponds to SDL window size. Refresh rate +will be the lowest available, if SDL_VIDEO_GF_REFRESH_RATE environment +variable is not set. + b) As confirmed by QSSL none of existing video drivers has support of +doublescan low-resolution video modes. So modes below 640x480 are not +supported. If your video driver supports low-resolution video modes, please +add SDL_GF_LOWRESOLUTION flag to the gf_devicename array in the SDL_qnxgf.c +source file. + +------------------------- + -- SDL Photon driver -- +------------------------- + +---------------------------- + -- SDL HID input driver -- +---------------------------- diff --git a/configure.in b/configure.in index c928f8640..4cafd8d74 100644 --- a/configure.in +++ b/configure.in @@ -1705,6 +1705,7 @@ CheckOpenGLESQNX() AC_MSG_RESULT($video_opengl) if test x$video_opengl = xyes; then AC_DEFINE(SDL_VIDEO_OPENGL_ES) + AC_DEFINE(SDL_VIDEO_RENDER_OGL_ES) EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lGLES_CM" else AC_MSG_CHECKING(for QNX OpenGL ES (CL) support) @@ -1719,7 +1720,8 @@ CheckOpenGLESQNX() AC_MSG_RESULT($video_opengl) if test x$video_opengl = xyes; then AC_DEFINE(SDL_VIDEO_OPENGL_ES) - EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lGLES_CL" + AC_DEFINE(SDL_VIDEO_RENDER_OGL_ES) + EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lGLES_CLS" fi fi fi @@ -2501,8 +2503,8 @@ case "$host" in # Set up files for the audio library if test x$enable_audio = xyes; then - AC_DEFINE(SDL_AUDIO_DRIVER_QNXNTO) - SOURCES="$SOURCES $srcdir/src/audio/nto/*.c" + AC_DEFINE(SDL_AUDIO_DRIVER_QSA) + SOURCES="$SOURCES $srcdir/src/audio/qsa/*.c" EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lasound" have_audio=yes fi diff --git a/include/SDL_config.h.in b/include/SDL_config.h.in index 25ef1bc52..c02193596 100644 --- a/include/SDL_config.h.in +++ b/include/SDL_config.h.in @@ -193,7 +193,7 @@ #undef SDL_AUDIO_DRIVER_OSS #undef SDL_AUDIO_DRIVER_OSS_SOUNDCARD_H #undef SDL_AUDIO_DRIVER_PAUDIO -#undef SDL_AUDIO_DRIVER_QNXNTO +#undef SDL_AUDIO_DRIVER_QSA #undef SDL_AUDIO_DRIVER_SNDMGR #undef SDL_AUDIO_DRIVER_SUNAUDIO #undef SDL_AUDIO_DRIVER_WINWAVEOUT diff --git a/include/SDL_opengles.h b/include/SDL_opengles.h index b15a56b0f..5297e4a47 100644 --- a/include/SDL_opengles.h +++ b/include/SDL_opengles.h @@ -962,6 +962,12 @@ extern "C" const GLvoid * pointer); #endif +/* GL_OES_query_matrix */ +#ifndef GL_OES_query_matrix +#define GL_OES_query_matrix 1 + GL_API GLbitfield GL_APIENTRY glQueryMatrixxOES(GLfixed mantissa[16], GLint exponent[16]); +#endif /* GL_OES_query_matrix */ + /* GL_OES_point_sprite */ #ifndef GL_OES_point_sprite #define GL_OES_point_sprite 1 diff --git a/src/audio/SDL_audio.c b/src/audio/SDL_audio.c index 35326669c..6ed8bc5de 100644 --- a/src/audio/SDL_audio.c +++ b/src/audio/SDL_audio.c @@ -49,7 +49,7 @@ extern AudioBootStrap DSP_bootstrap; extern AudioBootStrap DMA_bootstrap; extern AudioBootStrap ALSA_bootstrap; extern AudioBootStrap PULSEAUDIO_bootstrap; -extern AudioBootStrap QNXNTOAUDIO_bootstrap; +extern AudioBootStrap QSAAUDIO_bootstrap; extern AudioBootStrap SUNAUDIO_bootstrap; extern AudioBootStrap DMEDIA_bootstrap; extern AudioBootStrap ARTS_bootstrap; @@ -91,8 +91,8 @@ static AudioBootStrap *bootstrap[] = { &DSP_bootstrap, &DMA_bootstrap, #endif -#if SDL_AUDIO_DRIVER_QNXNTO - &QNXNTOAUDIO_bootstrap, +#if SDL_AUDIO_DRIVER_QSA + &QSAAUDIO_bootstrap, #endif #if SDL_AUDIO_DRIVER_SUNAUDIO &SUNAUDIO_bootstrap, diff --git a/src/audio/nto/SDL_nto_audio.c b/src/audio/nto/SDL_nto_audio.c deleted file mode 100644 index 2622b4331..000000000 --- a/src/audio/nto/SDL_nto_audio.c +++ /dev/null @@ -1,467 +0,0 @@ -/* - SDL - Simple DirectMedia Layer - Copyright (C) 1997-2009 Sam Lantinga - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with this library; if not, write to the Free - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - Sam Lantinga - slouken@libsdl.org -*/ -#include "SDL_config.h" - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "SDL_timer.h" -#include "SDL_audio.h" -#include "../SDL_audiomem.h" -#include "../SDL_audio_c.h" -#include "SDL_nto_audio.h" - -/* The tag name used by NTO audio */ -#define DRIVER_NAME "qsa-nto" - -/* default channel communication parameters */ -#define DEFAULT_CPARAMS_RATE 22050 -#define DEFAULT_CPARAMS_VOICES 1 -/* FIXME: need to add in the near future flexible logic with frag_size and frags count */ -#define DEFAULT_CPARAMS_FRAG_SIZE 4096 -#define DEFAULT_CPARAMS_FRAGS_MIN 1 -#define DEFAULT_CPARAMS_FRAGS_MAX 1 - -/* Open the audio device for playback, and don't block if busy */ -#define OPEN_FLAGS SND_PCM_OPEN_PLAYBACK - -#define QSA_NO_WORKAROUNDS 0x00000000 -#define QSA_MMAP_WORKAROUND 0x00000001 - -struct BuggyCards -{ - char *cardname; - unsigned long bugtype; -}; - -#define QSA_WA_CARDS 3 - -struct BuggyCards buggycards[QSA_WA_CARDS] = { - {"Sound Blaster Live!", QSA_MMAP_WORKAROUND}, - {"Vortex 8820", QSA_MMAP_WORKAROUND}, - {"Vortex 8830", QSA_MMAP_WORKAROUND}, -}; - - -static inline void -NTO_SetError(const char *fn, int rval) -{ - SDL_SetError("NTO: %s failed: %s", fn, snd_strerror(rval)); -} - - -/* card names check to apply the workarounds */ -static int -NTO_CheckBuggyCards(_THIS, unsigned long checkfor) -{ - char scardname[33]; - int it; - - if (snd_card_get_name(this->hidden->cardno, scardname, 32) < 0) { - return 0; - } - - for (it = 0; it < QSA_WA_CARDS; it++) { - if (SDL_strcmp(buggycards[it].cardname, scardname) == 0) { - if (buggycards[it].bugtype == checkfor) { - return 1; - } - } - } - - return 0; -} - -static void -NTO_ThreadInit(_THIS) -{ - struct sched_param param; - int status = SchedGet(0, 0, ¶m); - - /* increasing default 10 priority to 25 to avoid jerky sound */ - param.sched_priority = param.sched_curpriority + 15; - status = SchedSet(0, 0, SCHED_NOCHANGE, ¶m); -} - -/* PCM transfer channel parameters initialize function */ -static void -NTO_InitAudioParams(snd_pcm_channel_params_t * cpars) -{ - SDL_memset(cpars, 0, sizeof(snd_pcm_channel_params_t)); - - cpars->channel = SND_PCM_CHANNEL_PLAYBACK; - cpars->mode = SND_PCM_MODE_BLOCK; - cpars->start_mode = SND_PCM_START_DATA; - cpars->stop_mode = SND_PCM_STOP_STOP; - cpars->format.format = SND_PCM_SFMT_S16_LE; - cpars->format.interleave = 1; - cpars->format.rate = DEFAULT_CPARAMS_RATE; - cpars->format.voices = DEFAULT_CPARAMS_VOICES; - cpars->buf.block.frag_size = DEFAULT_CPARAMS_FRAG_SIZE; - cpars->buf.block.frags_min = DEFAULT_CPARAMS_FRAGS_MIN; - cpars->buf.block.frags_max = DEFAULT_CPARAMS_FRAGS_MAX; -} - - -/* This function waits until it is possible to write a full sound buffer */ -static void -NTO_WaitDevice(_THIS) -{ - fd_set wfds; - int selectret; - - FD_ZERO(&wfds); - FD_SET(this->hidden->audio_fd, &wfds); - - do { - selectret = - select(this->hidden->audio_fd + 1, NULL, &wfds, NULL, NULL); - switch (selectret) { - case -1: - case 0: - SDL_SetError("NTO: select() failed: %s\n", strerror(errno)); - return; - default: - if (FD_ISSET(this->hidden->audio_fd, &wfds)) { - return; - } - break; - } - } while (1); -} - -static void -NTO_PlayDevice(_THIS) -{ - snd_pcm_channel_status_t cstatus; - int written, rval; - int towrite; - void *pcmbuffer; - - if ((!this->enabled) || (!this->hidden)) { - return; - } - - towrite = this->spec.size; - pcmbuffer = this->hidden->pcm_buf; - - /* Write the audio data, checking for EAGAIN (buffer full) and underrun */ - do { - written = snd_pcm_plugin_write(this->hidden->audio_handle, - pcmbuffer, towrite); - if (written != towrite) { - if ((errno == EAGAIN) || (errno == EWOULDBLOCK)) { - /* Let a little CPU time go by and try to write again */ - SDL_Delay(1); - /* if we wrote some data */ - towrite -= written; - pcmbuffer += written * this->spec.channels; - continue; - } else if ((errno == EINVAL) || (errno == EIO)) { - SDL_memset(&cstatus, 0, sizeof(cstatus)); - cstatus.channel = SND_PCM_CHANNEL_PLAYBACK; - rval = snd_pcm_plugin_status(this->hidden->audio_handle, - &cstatus); - if (rval < 0) { - NTO_SetError("snd_pcm_plugin_status", rval); - return; - } - - if ((cstatus.status == SND_PCM_STATUS_UNDERRUN) || - (cstatus.status == SND_PCM_STATUS_READY)) { - rval = snd_pcm_plugin_prepare(this->hidden->audio_handle, - SND_PCM_CHANNEL_PLAYBACK); - if (rval < 0) { - NTO_SetError("snd_pcm_plugin_prepare", rval); - return; - } - } - continue; - } else { - return; - } - } else { - /* we wrote all remaining data */ - towrite -= written; - pcmbuffer += written * this->spec.channels; - } - } while ((towrite > 0) && (this->enabled)); - - /* If we couldn't write, assume fatal error for now */ - if (towrite != 0) { - this->enabled = 0; - } -} - -static Uint8 * -NTO_GetDeviceBuf(_THIS) -{ - return this->hidden->pcm_buf; -} - -static void -NTO_CloseDevice(_THIS) -{ - if (this->hidden != NULL) { - if (this->hidden->audio_handle != NULL) { - snd_pcm_plugin_flush(this->hidden->audio_handle, - SND_PCM_CHANNEL_PLAYBACK); - snd_pcm_close(this->hidden->audio_handle); - this->hidden->audio_handle = NULL; - } - if (this->hidden->pcm_buf != NULL) { - SDL_FreeAudioMem(this->hidden->pcm_buf); - this->hidden->pcm_buf = NULL; - } - SDL_free(this->hidden); - this->hidden = NULL; - } -} - -static int -NTO_OpenDevice(_THIS, const char *devname, int iscapture) -{ - int rval = 0; - int format = 0; - SDL_AudioFormat test_format = 0; - int found = 0; - snd_pcm_channel_setup_t csetup; - snd_pcm_channel_params_t cparams; - - /* Initialize all variables that we clean on shutdown */ - this->hidden = (struct SDL_PrivateAudioData *) - SDL_malloc((sizeof *this->hidden)); - if (this->hidden == NULL) { - SDL_OutOfMemory(); - return 0; - } - SDL_memset(this->hidden, 0, (sizeof *this->hidden)); - - /* initialize channel transfer parameters to default */ - NTO_InitAudioParams(&cparams); - - /* Open the audio device */ - rval = snd_pcm_open_preferred(&this->hidden->audio_handle, - &this->hidden->cardno, - &this->hidden->deviceno, OPEN_FLAGS); - - if (rval < 0) { - NTO_CloseDevice(this); - NTO_SetError("snd_pcm_open", rval); - return 0; - } - - if (!NTO_CheckBuggyCards(this, QSA_MMAP_WORKAROUND)) { - /* enable count status parameter */ - rval = snd_pcm_plugin_set_disable(this->hidden->audio_handle, - PLUGIN_DISABLE_MMAP); - if (rval < 0) { - NTO_CloseDevice(this); - NTO_SetError("snd_pcm_plugin_set_disable", rval); - return 0; - } - } - - /* Try for a closest match on audio format */ - format = 0; - /* can't use format as SND_PCM_SFMT_U8 = 0 in nto */ - found = 0; - - for (test_format = SDL_FirstAudioFormat(this->spec.format); !found;) { - /* if match found set format to equivalent ALSA format */ - switch (test_format) { - case AUDIO_U8: - format = SND_PCM_SFMT_U8; - found = 1; - break; - case AUDIO_S8: - format = SND_PCM_SFMT_S8; - found = 1; - break; - case AUDIO_S16LSB: - format = SND_PCM_SFMT_S16_LE; - found = 1; - break; - case AUDIO_S16MSB: - format = SND_PCM_SFMT_S16_BE; - found = 1; - break; - case AUDIO_U16LSB: - format = SND_PCM_SFMT_U16_LE; - found = 1; - break; - case AUDIO_U16MSB: - format = SND_PCM_SFMT_U16_BE; - found = 1; - break; - case AUDIO_S32LSB: - format = SND_PCM_SFMT_S32_LE; - found = 1; - break; - case AUDIO_S32MSB: - format = SND_PCM_SFMT_S32_BE; - found = 1; - break; - case AUDIO_F32LSB: - format = SND_PCM_SFMT_FLOAT_LE; - found = 1; - break; - case AUDIO_F32MSB: - format = SND_PCM_SFMT_FLOAT_BE; - found = 1; - break; - default: - break; - } - - if (!found) { - test_format = SDL_NextAudioFormat(); - } - } - - /* assumes test_format not 0 on success */ - if (test_format == 0) { - NTO_CloseDevice(this); - SDL_SetError("NTO: Couldn't find any hardware audio formats"); - return 0; - } - - this->spec.format = test_format; - - /* Set the audio format */ - cparams.format.format = format; - - /* Set mono or stereo audio (currently only two channels supported) */ - cparams.format.voices = this->spec.channels; - - /* Set rate */ - cparams.format.rate = this->spec.freq; - - /* Setup the transfer parameters according to cparams */ - rval = snd_pcm_plugin_params(this->hidden->audio_handle, &cparams); - if (rval < 0) { - NTO_CloseDevice(this); - NTO_SetError("snd_pcm_channel_params", rval); - return 0; - } - - /* Make sure channel is setup right one last time */ - SDL_memset(&csetup, '\0', sizeof(csetup)); - csetup.channel = SND_PCM_CHANNEL_PLAYBACK; - if (snd_pcm_plugin_setup(this->hidden->audio_handle, &csetup) < 0) { - NTO_CloseDevice(this); - SDL_SetError("NTO: Unable to setup playback channel\n"); - return 0; - } - - /* Calculate the final parameters for this audio specification */ - SDL_CalculateAudioSpec(&this->spec); - - this->hidden->pcm_len = this->spec.size; - - if (this->hidden->pcm_len == 0) { - this->hidden->pcm_len = - csetup.buf.block.frag_size * this->spec.channels * - (snd_pcm_format_width(format) / 8); - } - - /* - * Allocate memory to the audio buffer and initialize with silence - * (Note that buffer size must be a multiple of fragment size, so find - * closest multiple) - */ - this->hidden->pcm_buf = - (Uint8 *) SDL_AllocAudioMem(this->hidden->pcm_len); - if (this->hidden->pcm_buf == NULL) { - NTO_CloseDevice(this); - SDL_OutOfMemory(); - return 0; - } - SDL_memset(this->hidden->pcm_buf, this->spec.silence, - this->hidden->pcm_len); - - /* get the file descriptor */ - this->hidden->audio_fd = - snd_pcm_file_descriptor(this->hidden->audio_handle, - SND_PCM_CHANNEL_PLAYBACK); - if (this->hidden->audio_fd < 0) { - NTO_CloseDevice(this); - NTO_SetError("snd_pcm_file_descriptor", rval); - return 0; - } - - /* Trigger audio playback */ - rval = snd_pcm_plugin_prepare(this->hidden->audio_handle, - SND_PCM_CHANNEL_PLAYBACK); - if (rval < 0) { - NTO_CloseDevice(this); - NTO_SetError("snd_pcm_plugin_prepare", rval); - return 0; - } - - /* We're really ready to rock and roll. :-) */ - return 1; -} - - -static int -NTO_Init(SDL_AudioDriverImpl * impl) -{ - /* !!! FIXME: not right for device enum? */ - /* See if we can open a nonblocking channel. */ - snd_pcm_t *handle = NULL; - int rval = snd_pcm_open_preferred(&handle, NULL, NULL, OPEN_FLAGS); - if (rval < 0) { - SDL_SetError("NTO: couldn't open preferred audio device"); - return 0; - } - if ((rval = snd_pcm_close(handle)) < 0) { - SDL_SetError("NTO: couldn't close test audio device"); - return 0; - } - - /* Set the function pointers */ - impl->OpenDevice = NTO_OpenDevice; - impl->ThreadInit = NTO_ThreadInit; - impl->WaitDevice = NTO_WaitDevice; - impl->PlayDevice = NTO_PlayDevice; - impl->GetDeviceBuf = NTO_GetDeviceBuf; - impl->CloseDevice = NTO_CloseDevice; - impl->OnlyHasDefaultOutputDevice = 1; /* !!! FIXME: add device enum! */ - - /* !!! FIXME: device enum might make this 1. */ - return 2; /* 2 == definitely has an audio device. */ -} - -AudioBootStrap QNXNTOAUDIO_bootstrap = { - DRIVER_NAME, "QNX6 QSA-NTO Audio", NTO_Init, 0 -}; - -/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/audio/qsa/SDL_qsa_audio.c b/src/audio/qsa/SDL_qsa_audio.c new file mode 100644 index 000000000..5e3e7cf76 --- /dev/null +++ b/src/audio/qsa/SDL_qsa_audio.c @@ -0,0 +1,945 @@ +/* + SDL - Simple DirectMedia Layer + Copyright (C) 1997-2009 Sam Lantinga + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with this library; if not, write to the Free + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + Sam Lantinga + slouken@libsdl.org + + QNX Sound Architecture (QSA) SDL driver + Copyright (C) 2009 Mike Gorchak + (mike@malva.ua, lestat@i.com.ua) +*/ + +#include "SDL_config.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "SDL_timer.h" +#include "SDL_audio.h" +#include "../SDL_audiomem.h" +#include "../SDL_audio_c.h" +#include "SDL_qsa_audio.h" + +/* The tag name used by QSA audio framework */ +#define DRIVER_NAME "qsa" + +/* default channel communication parameters */ +#define DEFAULT_CPARAMS_RATE 44100 +#define DEFAULT_CPARAMS_VOICES 1 + +#define DEFAULT_CPARAMS_FRAG_SIZE 4096 +#define DEFAULT_CPARAMS_FRAGS_MIN 1 +#define DEFAULT_CPARAMS_FRAGS_MAX 1 + +#define QSA_NO_WORKAROUNDS 0x00000000 +#define QSA_MMAP_WORKAROUND 0x00000001 + +struct BuggyCards +{ + char* cardname; + unsigned long bugtype; +}; + +#define QSA_WA_CARDS 3 +#define QSA_MAX_CARD_NAME_LENGTH 33 + +struct BuggyCards buggycards[QSA_WA_CARDS]= +{ + {"Sound Blaster Live!", QSA_MMAP_WORKAROUND}, + {"Vortex 8820", QSA_MMAP_WORKAROUND}, + {"Vortex 8830", QSA_MMAP_WORKAROUND}, +}; + +/* List of found devices */ +#define QSA_MAX_DEVICES 32 +#define QSA_MAX_NAME_LENGTH 81+16 /* Hardcoded in QSA, can't be changed */ + +typedef struct _QSA_Device +{ + char name[QSA_MAX_NAME_LENGTH]; /* Long audio device name for SDL */ + int cardno; + int deviceno; +} QSA_Device; + +QSA_Device qsa_playback_device[QSA_MAX_DEVICES]; +uint32_t qsa_playback_devices; + +QSA_Device qsa_capture_device[QSA_MAX_DEVICES]; +uint32_t qsa_capture_devices; + +static inline void QSA_SetError(const char* fn, int status) +{ + SDL_SetError("QSA: %s failed: %s", fn, snd_strerror(status)); +} + +/* card names check to apply the workarounds */ +static int QSA_CheckBuggyCards(_THIS, unsigned long checkfor) +{ + char scardname[QSA_MAX_CARD_NAME_LENGTH]; + int it; + + if (snd_card_get_name(this->hidden->cardno, scardname, QSA_MAX_CARD_NAME_LENGTH-1)<0) + { + return 0; + } + + for (it=0; itchannel=SND_PCM_CHANNEL_PLAYBACK; + cpars->mode=SND_PCM_MODE_BLOCK; + cpars->start_mode=SND_PCM_START_DATA; + cpars->stop_mode=SND_PCM_STOP_STOP; + cpars->format.format=SND_PCM_SFMT_S16_LE; + cpars->format.interleave=1; + cpars->format.rate=DEFAULT_CPARAMS_RATE; + cpars->format.voices=DEFAULT_CPARAMS_VOICES; + cpars->buf.block.frag_size=DEFAULT_CPARAMS_FRAG_SIZE; + cpars->buf.block.frags_min=DEFAULT_CPARAMS_FRAGS_MIN; + cpars->buf.block.frags_max=DEFAULT_CPARAMS_FRAGS_MAX; +} + +/* This function waits until it is possible to write a full sound buffer */ +static void QSA_WaitDevice(_THIS) +{ + fd_set wfds; + fd_set rfds; + int selectret; + struct timeval timeout; + + if (!this->hidden->iscapture) + { + FD_ZERO(&wfds); + FD_SET(this->hidden->audio_fd, &wfds); + } + else + { + FD_ZERO(&rfds); + FD_SET(this->hidden->audio_fd, &rfds); + } + + do { + /* Setup timeout for playing one fragment equal to 2 seconds */ + /* If timeout occured than something wrong with hardware or driver */ + /* For example, Vortex 8820 audio driver stucks on second DAC because */ + /* it doesn't exist ! */ + timeout.tv_sec=2; + timeout.tv_usec=0; + this->hidden->timeout_on_wait=0; + + if (!this->hidden->iscapture) + { + selectret=select(this->hidden->audio_fd+1, NULL, &wfds, NULL, &timeout); + } + else + { + selectret=select(this->hidden->audio_fd+1, &rfds, NULL, NULL, &timeout); + } + + switch(selectret) + { + case -1: + { + SDL_SetError("QSA: select() failed: %s\n", strerror(errno)); + return; + } + break; + case 0: + { + SDL_SetError("QSA: timeout on buffer waiting occured\n"); + this->hidden->timeout_on_wait=1; + return; + } + break; + default: + { + if (!this->hidden->iscapture) + { + if (FD_ISSET(this->hidden->audio_fd, &wfds)) + { + return; + } + } + else + { + if (FD_ISSET(this->hidden->audio_fd, &rfds)) + { + return; + } + } + } + break; + } + } while (1); +} + +static void QSA_PlayDevice(_THIS) +{ + snd_pcm_channel_status_t cstatus; + int written; + int status; + int towrite; + void* pcmbuffer; + + if ((!this->enabled) || (!this->hidden)) + { + return; + } + + towrite = this->spec.size; + pcmbuffer = this->hidden->pcm_buf; + + /* Write the audio data, checking for EAGAIN (buffer full) and underrun */ + do { + written=snd_pcm_plugin_write(this->hidden->audio_handle, pcmbuffer, towrite); + if (written!=towrite) + { + /* Check if samples playback got stuck somewhere in hardware or in */ + /* the audio device driver */ + if ((errno==EAGAIN) && (written==0)) + { + if (this->hidden->timeout_on_wait!=0) + { + SDL_SetError("QSA: buffer playback timeout\n"); + return; + } + } + + /* Check for errors or conditions */ + if ((errno==EAGAIN)||(errno==EWOULDBLOCK)) + { + /* Let a little CPU time go by and try to write again */ + SDL_Delay(1); + + /* if we wrote some data */ + towrite-=written; + pcmbuffer+=written*this->spec.channels; + continue; + } + else + { + if ((errno==EINVAL)||(errno==EIO)) + { + SDL_memset(&cstatus, 0, sizeof(cstatus)); + if (!this->hidden->iscapture) + { + cstatus.channel=SND_PCM_CHANNEL_PLAYBACK; + } + else + { + cstatus.channel=SND_PCM_CHANNEL_CAPTURE; + } + + status=snd_pcm_plugin_status(this->hidden->audio_handle, &cstatus); + if (status<0) + { + QSA_SetError("snd_pcm_plugin_status", status); + return; + } + + if ((cstatus.status==SND_PCM_STATUS_UNDERRUN) || + (cstatus.status==SND_PCM_STATUS_READY)) + { + if (!this->hidden->iscapture) + { + status=snd_pcm_plugin_prepare(this->hidden->audio_handle, + SND_PCM_CHANNEL_PLAYBACK); + } + else + { + status=snd_pcm_plugin_prepare(this->hidden->audio_handle, + SND_PCM_CHANNEL_CAPTURE); + } + if (status<0) + { + QSA_SetError("snd_pcm_plugin_prepare", status); + return; + } + } + continue; + } + else + { + return; + } + } + } + else + { + /* we wrote all remaining data */ + towrite -= written; + pcmbuffer += written * this->spec.channels; + } + } while ((towrite>0) && (this->enabled)); + + /* If we couldn't write, assume fatal error for now */ + if (towrite!=0) + { + this->enabled=0; + } +} + +static Uint8* QSA_GetDeviceBuf(_THIS) +{ + return this->hidden->pcm_buf; +} + +static void QSA_CloseDevice(_THIS) +{ + if (this->hidden!=NULL) + { + if (this->hidden->audio_handle!=NULL) + { + if (!this->hidden->iscapture) + { + /* Finish playing available samples */ + snd_pcm_plugin_flush(this->hidden->audio_handle, SND_PCM_CHANNEL_PLAYBACK); + } + else + { + /* Cancel unread samples during capture */ + snd_pcm_plugin_flush(this->hidden->audio_handle, SND_PCM_CHANNEL_CAPTURE); + } + snd_pcm_close(this->hidden->audio_handle); + this->hidden->audio_handle=NULL; + } + + if (this->hidden->pcm_buf!=NULL) + { + SDL_FreeAudioMem(this->hidden->pcm_buf); + this->hidden->pcm_buf=NULL; + } + + SDL_free(this->hidden); + this->hidden=NULL; + } +} + +static int QSA_OpenDevice(_THIS, const char* devname, int iscapture) +{ + int status=0; + int format=0; + SDL_AudioFormat test_format=0; + int found=0; + snd_pcm_channel_setup_t csetup; + snd_pcm_channel_params_t cparams; + + /* Initialize all variables that we clean on shutdown */ + this->hidden=(struct SDL_PrivateAudioData*)SDL_calloc(1, (sizeof(struct SDL_PrivateAudioData))); + if (this->hidden==NULL) + { + SDL_OutOfMemory(); + return 0; + } + SDL_memset(this->hidden, 0, sizeof(struct SDL_PrivateAudioData)); + + /* Initialize channel transfer parameters to default */ + QSA_InitAudioParams(&cparams); + + /* Initialize channel direction: capture or playback */ + this->hidden->iscapture=iscapture; + + /* Find deviceid and cardid by device name for playback */ + if ((!this->hidden->iscapture) && (devname!=NULL)) + { + uint32_t device; + int32_t status; + + /* Search in the playback devices */ + device=0; + do { + status=SDL_strcmp(qsa_playback_device[device].name, devname); + if (status==0) + { + /* Found requested device */ + this->hidden->deviceno=qsa_playback_device[device].deviceno; + this->hidden->cardno=qsa_playback_device[device].cardno; + break; + } + device++; + if (device>=qsa_playback_devices) + { + QSA_CloseDevice(this); + SDL_SetError("No such playback device"); + return 0; + } + } while(1); + } + + /* Find deviceid and cardid by device name for capture */ + if ((this->hidden->iscapture) && (devname!=NULL)) + { + /* Search in the capture devices */ + uint32_t device; + int32_t status; + + /* Searching in the playback devices */ + device=0; + do { + status=SDL_strcmp(qsa_capture_device[device].name, devname); + if (status==0) + { + /* Found requested device */ + this->hidden->deviceno=qsa_capture_device[device].deviceno; + this->hidden->cardno=qsa_capture_device[device].cardno; + break; + } + device++; + if (device>=qsa_capture_devices) + { + QSA_CloseDevice(this); + SDL_SetError("No such capture device"); + return 0; + } + } while(1); + } + + /* Check if SDL requested default audio device */ + if (devname==NULL) + { + /* Open system default audio device */ + if (!this->hidden->iscapture) + { + status=snd_pcm_open_preferred(&this->hidden->audio_handle, + &this->hidden->cardno, + &this->hidden->deviceno, SND_PCM_OPEN_PLAYBACK); + } + else + { + status=snd_pcm_open_preferred(&this->hidden->audio_handle, + &this->hidden->cardno, + &this->hidden->deviceno, SND_PCM_OPEN_CAPTURE); + } + } + else + { + /* Open requested audio device */ + if (!this->hidden->iscapture) + { + status=snd_pcm_open(&this->hidden->audio_handle, this->hidden->cardno, + this->hidden->deviceno, SND_PCM_OPEN_PLAYBACK); + } + else + { + status=snd_pcm_open(&this->hidden->audio_handle, this->hidden->cardno, + this->hidden->deviceno, SND_PCM_OPEN_CAPTURE); + } + } + + /* Check if requested device is opened */ + if (status<0) + { + QSA_CloseDevice(this); + QSA_SetError("snd_pcm_open", status); + return 0; + } + + if (!QSA_CheckBuggyCards(this, QSA_MMAP_WORKAROUND)) + { + /* Disable QSA MMAP plugin for buggy audio drivers */ + status=snd_pcm_plugin_set_disable(this->hidden->audio_handle, PLUGIN_DISABLE_MMAP); + if (status<0) + { + QSA_CloseDevice(this); + QSA_SetError("snd_pcm_plugin_set_disable", status); + return 0; + } + } + + /* Try for a closest match on audio format */ + format = 0; + /* can't use format as SND_PCM_SFMT_U8 = 0 in qsa */ + found = 0; + + for (test_format = SDL_FirstAudioFormat(this->spec.format); !found;) + { + /* if match found set format to equivalent QSA format */ + switch (test_format) + { + case AUDIO_U8: + { + format=SND_PCM_SFMT_U8; + found=1; + } + break; + case AUDIO_S8: + { + format=SND_PCM_SFMT_S8; + found=1; + } + break; + case AUDIO_S16LSB: + { + format=SND_PCM_SFMT_S16_LE; + found=1; + } + break; + case AUDIO_S16MSB: + { + format=SND_PCM_SFMT_S16_BE; + found=1; + } + break; + case AUDIO_U16LSB: + { + format=SND_PCM_SFMT_U16_LE; + found=1; + } + break; + case AUDIO_U16MSB: + { + format=SND_PCM_SFMT_U16_BE; + found=1; + } + break; + case AUDIO_S32LSB: + { + format=SND_PCM_SFMT_S32_LE; + found=1; + } + break; + case AUDIO_S32MSB: + { + format=SND_PCM_SFMT_S32_BE; + found=1; + } + break; + case AUDIO_F32LSB: + { + format=SND_PCM_SFMT_FLOAT_LE; + found=1; + } + break; + case AUDIO_F32MSB: + { + format=SND_PCM_SFMT_FLOAT_BE; + found=1; + } + break; + default: + { + break; + } + } + + if (!found) + { + test_format = SDL_NextAudioFormat(); + } + } + + /* assumes test_format not 0 on success */ + if (test_format==0) + { + QSA_CloseDevice(this); + SDL_SetError("QSA: Couldn't find any hardware audio formats"); + return 0; + } + + this->spec.format=test_format; + + /* Set the audio format */ + cparams.format.format=format; + + /* Set mono/stereo/4ch/6ch/8ch audio */ + cparams.format.voices=this->spec.channels; + + /* Set rate */ + cparams.format.rate=this->spec.freq; + + /* Setup the transfer parameters according to cparams */ + status=snd_pcm_plugin_params(this->hidden->audio_handle, &cparams); + if (status<0) + { + QSA_CloseDevice(this); + QSA_SetError("snd_pcm_channel_params", status); + return 0; + } + + /* Make sure channel is setup right one last time */ + SDL_memset(&csetup, '\0', sizeof(csetup)); + if (!this->hidden->iscapture) + { + csetup.channel=SND_PCM_CHANNEL_PLAYBACK; + } + else + { + csetup.channel=SND_PCM_CHANNEL_CAPTURE; + } + + /* Setup an audio channel */ + if (snd_pcm_plugin_setup(this->hidden->audio_handle, &csetup) < 0) + { + QSA_CloseDevice(this); + SDL_SetError("QSA: Unable to setup channel\n"); + return 0; + } + + /* Calculate the final parameters for this audio specification */ + SDL_CalculateAudioSpec(&this->spec); + + this->hidden->pcm_len = this->spec.size; + + if (this->hidden->pcm_len==0) + { + this->hidden->pcm_len=csetup.buf.block.frag_size * this->spec.channels * + (snd_pcm_format_width(format) / 8); + } + + /* + * Allocate memory to the audio buffer and initialize with silence + * (Note that buffer size must be a multiple of fragment size, so find + * closest multiple) + */ + this->hidden->pcm_buf=(Uint8*)SDL_AllocAudioMem(this->hidden->pcm_len); + if (this->hidden->pcm_buf==NULL) + { + QSA_CloseDevice(this); + SDL_OutOfMemory(); + return 0; + } + SDL_memset(this->hidden->pcm_buf, this->spec.silence, this->hidden->pcm_len); + + /* get the file descriptor */ + if (!this->hidden->iscapture) + { + this->hidden->audio_fd=snd_pcm_file_descriptor(this->hidden->audio_handle, + SND_PCM_CHANNEL_PLAYBACK); + } + else + { + this->hidden->audio_fd=snd_pcm_file_descriptor(this->hidden->audio_handle, + SND_PCM_CHANNEL_CAPTURE); + } + + if (this->hidden->audio_fd<0) + { + QSA_CloseDevice(this); + QSA_SetError("snd_pcm_file_descriptor", status); + return 0; + } + + /* Prepare an audio channel */ + if (!this->hidden->iscapture) + { + /* Prepare audio playback */ + status=snd_pcm_plugin_prepare(this->hidden->audio_handle, SND_PCM_CHANNEL_PLAYBACK); + } + else + { + /* Prepare audio capture */ + status=snd_pcm_plugin_prepare(this->hidden->audio_handle, SND_PCM_CHANNEL_CAPTURE); + } + + if (status<0) + { + QSA_CloseDevice(this); + QSA_SetError("snd_pcm_plugin_prepare", status); + return 0; + } + + /* We're really ready to rock and roll. :-) */ + return 1; +} + +int QSA_DetectDevices(int iscapture) +{ + uint32_t it; + uint32_t cards; + uint32_t devices; + int32_t status; + + /* Detect amount of available devices */ + /* this value can be changed in the runtime */ + cards=snd_cards(); + + /* If io-audio manager is not running we will get 0 as number */ + /* of available audio devices */ + if (cards==0) + { + /* We have no any available audio devices */ + return 0; + } + + /* Find requested devices by type */ + if (!iscapture) + { + /* Playback devices enumeration requested */ + for(it=0; it=QSA_MAX_DEVICES) + { + break; + } + devices++; + } while(1); + + /* Check if we reached maximum devices count */ + if (qsa_playback_devices>=QSA_MAX_DEVICES) + { + break; + } + } + } + else + { + /* Capture devices enumeration requested */ + for(it=0; it=QSA_MAX_DEVICES) + { + break; + } + } + else + { + break; + } + devices++; + } while(1); + + /* Check if we reached maximum devices count */ + if (qsa_capture_devices>=QSA_MAX_DEVICES) + { + break; + } + } + } + + /* Return amount of available playback or capture devices */ + if (!iscapture) + { + return qsa_playback_devices; + } + else + { + return qsa_capture_devices; + } +} + +const char* QSA_GetDeviceName(int index, int iscapture) +{ + if (!iscapture) + { + if (index>=qsa_playback_devices) + { + return "No such playback device"; + } + + return qsa_playback_device[index].name; + } + else + { + if (index>=qsa_capture_devices) + { + return "No such capture device"; + } + + return qsa_capture_device[index].name; + } +} + +void QSA_WaitDone(_THIS) +{ + if (!this->hidden->iscapture) + { + if (this->hidden->audio_handle!=NULL) + { + /* Wait till last fragment is played and stop channel */ + snd_pcm_plugin_flush(this->hidden->audio_handle, SND_PCM_CHANNEL_PLAYBACK); + } + } + else + { + if (this->hidden->audio_handle!=NULL) + { + /* Discard all unread data and stop channel */ + snd_pcm_plugin_flush(this->hidden->audio_handle, SND_PCM_CHANNEL_CAPTURE); + } + } +} + +void QSA_Deinitialize(void) +{ + /* Clear devices array on shutdown */ + SDL_memset(qsa_playback_device, 0x00, sizeof(QSA_Device)*QSA_MAX_DEVICES); + SDL_memset(qsa_capture_device, 0x00, sizeof(QSA_Device)*QSA_MAX_DEVICES); + qsa_playback_devices=0; + qsa_capture_devices=0; +} + +static int QSA_Init(SDL_AudioDriverImpl* impl) +{ + snd_pcm_t* handle=NULL; + int32_t status=0; + + /* Clear devices array */ + SDL_memset(qsa_playback_device, 0x00, sizeof(QSA_Device)*QSA_MAX_DEVICES); + SDL_memset(qsa_capture_device, 0x00, sizeof(QSA_Device)*QSA_MAX_DEVICES); + qsa_playback_devices=0; + qsa_capture_devices=0; + + /* Set function pointers */ + /* DeviceLock and DeviceUnlock functions are used default, */ + /* provided by SDL, which uses pthread_mutex for lock/unlock */ + impl->DetectDevices=QSA_DetectDevices; + impl->GetDeviceName=QSA_GetDeviceName; + impl->OpenDevice=QSA_OpenDevice; + impl->ThreadInit=QSA_ThreadInit; + impl->WaitDevice=QSA_WaitDevice; + impl->PlayDevice=QSA_PlayDevice; + impl->GetDeviceBuf=QSA_GetDeviceBuf; + impl->CloseDevice=QSA_CloseDevice; + impl->WaitDone=QSA_WaitDone; + impl->Deinitialize=QSA_Deinitialize; + impl->LockDevice=NULL; + impl->UnlockDevice=NULL; + + impl->OnlyHasDefaultOutputDevice=0; + impl->ProvidesOwnCallbackThread=0; + impl->SkipMixerLock=0; + impl->HasCaptureSupport=1; + impl->OnlyHasDefaultOutputDevice=0; + impl->OnlyHasDefaultInputDevice=0; + + /* Check if io-audio manager is running or not */ + status=snd_cards(); + if (status==0) + { + /* if no, return immediately */ + return 1; + } + + /* At this point we are definitely has an audio device */ + return 2; +} + +AudioBootStrap QSAAUDIO_bootstrap= +{ + DRIVER_NAME, "QNX QSA Audio", QSA_Init, 0 +}; + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/audio/nto/SDL_nto_audio.h b/src/audio/qsa/SDL_qsa_audio.h similarity index 75% rename from src/audio/nto/SDL_nto_audio.h rename to src/audio/qsa/SDL_qsa_audio.h index e2a8531f1..00f3d772f 100644 --- a/src/audio/nto/SDL_nto_audio.h +++ b/src/audio/qsa/SDL_qsa_audio.h @@ -18,36 +18,45 @@ Sam Lantinga slouken@libsdl.org + + QNX Sound Architecture (QSA) SDL driver + Copyright (C) 2009 Mike Gorchak + (mike@malva.ua, lestat@i.com.ua) */ + #include "SDL_config.h" -#ifndef __SDL_NTO_AUDIO_H__ -#define __SDL_NTO_AUDIO_H__ +#ifndef __SDL_QSA_AUDIO_H__ +#define __SDL_QSA_AUDIO_H__ #include #include "../SDL_sysaudio.h" /* Hidden "this" pointer for the audio functions */ -#define _THIS SDL_AudioDevice *this +#define _THIS SDL_AudioDevice* this struct SDL_PrivateAudioData { + /* SDL capture state */ + int iscapture; + /* The audio device handle */ int cardno; int deviceno; - snd_pcm_t *audio_handle; + snd_pcm_t* audio_handle; /* The audio file descriptor */ int audio_fd; - /* The parent process id, to detect when application quits */ - pid_t parent; + /* Select timeout status */ + uint32_t timeout_on_wait; /* Raw mixing buffer */ - Uint8 *pcm_buf; + Uint8* pcm_buf; Uint32 pcm_len; }; -#endif /* __SDL_NTO_AUDIO_H__ */ +#endif /* __SDL_QSA_AUDIO_H__ */ + /* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/video/SDL_renderer_gles.c b/src/video/SDL_renderer_gles.c index fb4688e5f..4aec2ed11 100644 --- a/src/video/SDL_renderer_gles.c +++ b/src/video/SDL_renderer_gles.c @@ -30,6 +30,17 @@ #include "SDL_rect_c.h" #include "SDL_yuv_sw_c.h" +#ifdef __QNXNTO__ + +/* Empty function stub to get OpenGL ES 1.0 support without */ +/* OpenGL ES extension GL_OES_draw_texture_supported */ +GL_API void GL_APIENTRY glDrawTexiOES(GLint x, GLint y, GLint z, GLint width, GLint height) +{ + return; +} + +#endif /* __QNXNTO__ */ + /* OpenGL ES 1.1 renderer implementation, based on the OpenGL renderer */ static const float inv255f = 1.0f / 255.0f; @@ -349,6 +360,7 @@ GLES_CreateTexture(SDL_Renderer * renderer, SDL_Texture * texture) GLenum format, type; int texture_w, texture_h; GLenum result; + switch (texture->format) { case SDL_PIXELFORMAT_INDEX1LSB: case SDL_PIXELFORMAT_INDEX1MSB: @@ -479,8 +491,6 @@ static void SetupTextureUpdate(GLES_RenderData * renderdata, SDL_Texture * texture, int pitch) { - - GLES_TextureData *data = (GLES_TextureData *) texture->driverdata; renderdata->glBindTexture(data->type, data->texture); renderdata->glPixelStorei(GL_UNPACK_ALIGNMENT, 1); @@ -888,6 +898,6 @@ GLES_DestroyRenderer(SDL_Renderer * renderer) SDL_free(renderer); } -#endif /* SDL_VIDEO_RENDER_OGL */ +#endif /* SDL_VIDEO_RENDER_OGL_ES */ /* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/video/SDL_video.c b/src/video/SDL_video.c index 2b8b1d166..f2b259ac0 100644 --- a/src/video/SDL_video.c +++ b/src/video/SDL_video.c @@ -2711,12 +2711,23 @@ SDL_GL_GetAttribute(SDL_GLattr attr, int *value) { #if SDL_VIDEO_OPENGL || SDL_VIDEO_OPENGL_ES void (APIENTRY * glGetIntegervFunc) (GLenum pname, GLint * params); + GLenum (APIENTRY * glGetErrorFunc) (void); GLenum attrib = 0; + GLenum error = 0; glGetIntegervFunc = SDL_GL_GetProcAddress("glGetIntegerv"); if (!glGetIntegervFunc) { return -1; } + + glGetErrorFunc = SDL_GL_GetProcAddress("glGetError"); + if (!glGetErrorFunc) { + return -1; + } + + /* Clear value in any case */ + *value=0; + switch (attr) { case SDL_GL_RETAINED_BACKING: *value = _this->gl_config.retained_backing; @@ -2738,11 +2749,10 @@ SDL_GL_GetAttribute(SDL_GLattr attr, int *value) attrib = GL_DOUBLEBUFFER; break; #else - /* - * I believe double buffering is the only option in OpenGL ES - * -- in any case, GL_DOUBLEBUFFER doesn't exist - */ - *value = 1; + /* OpenGL ES 1.0 and above specifications have EGL_SINGLE_BUFFER */ + /* parameter which switches double buffer to single buffer. OpenGL ES */ + /* SDL driver must set proper value after initialization */ + *value = _this->gl_config.double_buffer; return 0; #endif case SDL_GL_DEPTH_SIZE: @@ -2824,6 +2834,29 @@ SDL_GL_GetAttribute(SDL_GLattr attr, int *value) } glGetIntegervFunc(attrib, (GLint *) value); + error=glGetErrorFunc(); + if (error!=GL_NO_ERROR) + { + switch (error) + { + case GL_INVALID_ENUM: + { + SDL_SetError("OpenGL error: GL_INVALID_ENUM"); + } + break; + case GL_INVALID_VALUE: + { + SDL_SetError("OpenGL error: GL_INVALID_VALUE"); + } + break; + default: + { + SDL_SetError("OpenGL error: %08X", error); + } + break; + } + return -1; + } return 0; #else SDL_Unsupported(); diff --git a/src/video/qnxgf/SDL_gf_opengles.c b/src/video/qnxgf/SDL_gf_opengles.c new file mode 100644 index 000000000..12b596275 --- /dev/null +++ b/src/video/qnxgf/SDL_gf_opengles.c @@ -0,0 +1,56 @@ +Date: Mon, 23 Mar 2009 09:17:24 +0200 +From: "Mike Gorchak" +To: "Sam Lantinga" +Subject: New QNX patches + +/* + SDL - Simple DirectMedia Layer + Copyright (C) 1997-2009 Sam Lantinga + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Sam Lantinga + slouken@libsdl.org + + QNX Graphics Framework SDL driver + Copyright (C) 2009 Mike Gorchak + (mike@malva.ua, lestat@i.com.ua) +*/ + +#include +#include + +/* This is OpenGL ES 1.0 helper functions from OpenGL ES 1.1 specification, */ +/* which could be implemented independently from hardware, just wrappers */ + +GLAPI void APIENTRY glTexParameteri(GLenum target, GLenum pname, GLint param) +{ + glTexParameterx(target, pname, (GLfixed)param); + return; +} + +GLAPI void APIENTRY glTexParameteriv(GLenum target, GLenum pname, const GLint* params) +{ + /* Retrieve one parameter only */ + glTexParameterx(target, pname, (GLfixed)*params); + return; +} + +GLAPI void APIENTRY glColor4ub(GLubyte red, GLubyte green, GLubyte blue, GLubyte alpha) +{ + glColor4f(((GLfloat)red)/255.f, ((GLfloat)green)/255.f, ((GLfloat)blue)/255.f, ((GLfloat)alpha)/255.f); + return; +} + diff --git a/src/video/qnxgf/SDL_gf_render.c b/src/video/qnxgf/SDL_gf_render.c index ac4307836..fbd32b76c 100644 --- a/src/video/qnxgf/SDL_gf_render.c +++ b/src/video/qnxgf/SDL_gf_render.c @@ -103,6 +103,13 @@ static SDL_Renderer* gf_createrenderer(SDL_Window* window, Uint32 flags) int32_t jt; int32_t status; + /* Check if it is OpenGL ES window */ + if ((window->flags & SDL_WINDOW_OPENGL)==SDL_WINDOW_OPENGL) + { + /* No error, just no need to create 2D renderer for OpenGL ES window */ + return NULL; + } + /* Allocate new renderer structure */ renderer=(SDL_Renderer*)SDL_calloc(1, sizeof(SDL_Renderer)); if (renderer==NULL) diff --git a/src/video/qnxgf/SDL_qnxgf.c b/src/video/qnxgf/SDL_qnxgf.c index 3745a0162..e94bd3735 100644 --- a/src/video/qnxgf/SDL_qnxgf.c +++ b/src/video/qnxgf/SDL_qnxgf.c @@ -29,6 +29,7 @@ #include "../SDL_sysvideo.h" #include "SDL_version.h" #include "SDL_syswm.h" +#include "SDL_loadso.h" /* Include QNX Graphics Framework declarations */ #include @@ -46,104 +47,132 @@ /******************************************************************************/ static SDL_DisplayMode generic_mode[]= { - {0, 320, 200, 70, NULL}, /* 320x200 modes are 70Hz and 85Hz */ - {0, 320, 200, 85, NULL}, - {0, 320, 240, 70, NULL}, /* 320x240 modes are 70Hz and 85Hz */ - {0, 320, 240, 85, NULL}, - {0, 512, 384, 60, NULL}, /* 512x384 modes are 60Hz and 70Hz */ - {0, 512, 384, 70, NULL}, - {0, 640, 480, 60, NULL}, /* 640x480 modes are 60Hz, 75Hz, 85Hz */ - {0, 640, 480, 75, NULL}, - {0, 640, 480, 85, NULL}, - {0, 800, 600, 60, NULL}, /* 800x600 modes are 60Hz, 75Hz, 85Hz */ - {0, 800, 600, 75, NULL}, - {0, 800, 600, 85, NULL}, - {0, 800, 480, 60, NULL}, /* 800x480 mode is 60Hz only */ - {0, 1024, 640, 60, NULL}, /* 1024x640 mode is 60Hz only */ - {0, 1024, 768, 60, NULL}, /* 1024x768 modes are 60Hz, 70Hz, 75Hz */ - {0, 1024, 768, 70, NULL}, - {0, 1024, 768, 75, NULL}, - {0, 1280, 720, 60, NULL}, /* 1280x720 mode is 60Hz only */ - {0, 1280, 768, 60, NULL}, /* 1280x768 mode is 60Hz only */ - {0, 1280, 800, 60, NULL}, /* 1280x800 mode is 60Hz only */ - {0, 1280, 960, 60, NULL}, /* 1280x960 mode is 60Hz only */ - {0, 1280, 1024, 60, NULL}, /* 1280x1024 modes are 60Hz, 75Hz, 85Hz and */ - {0, 1280, 1024, 75, NULL}, /* 100 Hz */ - {0, 1280, 1024, 85, NULL}, /* */ + {0, 320, 200, 70, NULL}, /* 320x200 modes are 70Hz and 85Hz */ + {0, 320, 200, 85, NULL}, + {0, 320, 240, 70, NULL}, /* 320x240 modes are 70Hz and 85Hz */ + {0, 320, 240, 85, NULL}, + {0, 512, 384, 60, NULL}, /* 512x384 modes are 60Hz and 70Hz */ + {0, 512, 384, 70, NULL}, + {0, 640, 480, 60, NULL}, /* 640x480 modes are 60Hz, 75Hz, 85Hz */ + {0, 640, 480, 75, NULL}, + {0, 640, 480, 85, NULL}, + {0, 800, 600, 60, NULL}, /* 800x600 modes are 60Hz, 75Hz, 85Hz */ + {0, 800, 600, 75, NULL}, + {0, 800, 600, 85, NULL}, + {0, 800, 480, 60, NULL}, /* 800x480 mode is 60Hz only */ + {0, 1024, 640, 60, NULL}, /* 1024x640 mode is 60Hz only */ + {0, 1024, 768, 60, NULL}, /* 1024x768 modes are 60Hz, 70Hz, 75Hz */ + {0, 1024, 768, 70, NULL}, + {0, 1024, 768, 75, NULL}, + {0, 1280, 720, 60, NULL}, /* 1280x720 mode is 60Hz only */ + {0, 1280, 768, 60, NULL}, /* 1280x768 mode is 60Hz only */ + {0, 1280, 800, 60, NULL}, /* 1280x800 mode is 60Hz only */ + {0, 1280, 960, 60, NULL}, /* 1280x960 mode is 60Hz only */ + {0, 1280, 1024, 60, NULL}, /* 1280x1024 modes are 60Hz, 75Hz, 85Hz and */ + {0, 1280, 1024, 75, NULL}, /* 100 Hz */ + {0, 1280, 1024, 85, NULL}, /* */ {0, 1280, 1024, 100, NULL}, /* */ - {0, 1400, 1050, 60, NULL}, /* 1400x1050 mode is 60Hz only */ - {0, 1440, 900, 60, NULL}, /* 1440x900 mode is 60Hz only */ - {0, 1440, 960, 60, NULL}, /* 1440x960 mode is 60Hz only */ - {0, 1600, 1200, 60, NULL}, /* 1600x1200 mode is 60Hz only */ - {0, 1680, 1050, 60, NULL}, /* 1680x1050 mode is 60Hz only */ - {0, 1920, 1080, 60, NULL}, /* 1920x1080 mode is 60Hz only */ - {0, 1920, 1200, 60, NULL}, /* 1920x1200 mode is 60Hz only */ - {0, 2048, 1536, 60, NULL}, /* 2048x1536 mode is 60Hz only */ - {0, 2048, 1080, 60, NULL}, /* 2048x1080 mode is 60Hz only */ - {0, 0, 0, 0, NULL} /* End of generic mode list */ + {0, 1400, 1050, 60, NULL}, /* 1400x1050 mode is 60Hz only */ + {0, 1440, 900, 60, NULL}, /* 1440x900 mode is 60Hz only */ + {0, 1440, 960, 60, NULL}, /* 1440x960 mode is 60Hz only */ + {0, 1600, 1200, 60, NULL}, /* 1600x1200 mode is 60Hz only */ + {0, 1680, 1050, 60, NULL}, /* 1680x1050 mode is 60Hz only */ + {0, 1920, 1080, 60, NULL}, /* 1920x1080 mode is 60Hz only */ + {0, 1920, 1200, 60, NULL}, /* 1920x1200 mode is 60Hz only */ + {0, 2048, 1536, 60, NULL}, /* 2048x1536 mode is 60Hz only */ + {0, 2048, 1080, 60, NULL}, /* 2048x1080 mode is 60Hz only */ + {0, 0, 0, 0, NULL} /* End of generic mode list */ }; /* Low level device graphics driver names, which they are reporting */ GF_DeviceCaps gf_devicename[]= { /* ATI Rage 128 graphics driver (devg-ati_rage128) */ - {"ati_rage128", SDL_GF_ACCELERATED}, + {"ati_rage128", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Fujitsu Carmine graphics driver (devg-carmine.so) */ - {"carmine", SDL_GF_ACCELERATED}, + {"carmine", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_ACCELERATED_3D}, /* C&T graphics driver (devg-chips.so) */ - {"chips", SDL_GF_ACCELERATED}, + {"chips", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Fujitsu Coral graphics driver (devg-coral.so) */ - {"coral", SDL_GF_ACCELERATED}, + {"coral", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_ACCELERATED_3D}, /* Intel integrated graphics driver (devg-extreme2.so) */ - {"extreme2", SDL_GF_ACCELERATED}, + {"extreme2", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_ACCELERATED_3D}, /* Unaccelerated FB driver (devg-flat.so) */ - {"flat", SDL_GF_UNACCELERATED}, + {"flat", SDL_GF_UNACCELERATED | SDL_GF_LOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* NS Geode graphics driver (devg-geode.so) */ - {"geode", SDL_GF_ACCELERATED}, + {"geode", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Geode LX graphics driver (devg-geodelx.so) */ - {"geodelx", SDL_GF_ACCELERATED}, + {"geodelx", SDL_GF_ACCELERATED | SDL_GF_LOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Intel integrated graphics driver (devg-gma9xx.so) */ - {"gma", SDL_GF_ACCELERATED}, + {"gma", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_ACCELERATED_3D}, /* Intel integrated graphics driver (devg-i810.so) */ - {"i810", SDL_GF_ACCELERATED}, + {"i810", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Intel integrated graphics driver (devg-i830.so) */ - {"i830", SDL_GF_ACCELERATED}, + {"i830", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Geode LX graphics driver (devg-lx800.so) */ - {"lx800", SDL_GF_ACCELERATED}, + {"lx800", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Matrox Gxx graphics driver (devg-matroxg.so) */ - {"matroxg", SDL_GF_ACCELERATED}, + {"matroxg", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Intel Poulsbo graphics driver (devg-poulsbo.so) */ - {"poulsbo", SDL_GF_ACCELERATED}, + {"poulsbo", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_ACCELERATED_3D}, /* ATI Radeon driver (devg-radeon.so) */ - {"radeon", SDL_GF_ACCELERATED}, + {"radeon", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* ATI Rage driver (devg-rage.so) */ - {"rage", SDL_GF_ACCELERATED}, + {"rage", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* S3 Savage graphics driver (devg-s3_savage.so) */ - {"s3_savage", SDL_GF_ACCELERATED}, + {"s3_savage", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* SiS630 integrated graphics driver (devg-sis630.so) */ - {"sis630", SDL_GF_ACCELERATED}, + {"sis630", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* PowerVR SGX 535 graphics driver (devg-poulsbo.so) */ - {"sgx", SDL_GF_ACCELERATED}, + {"sgx", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_ACCELERATED_3D}, /* SM Voyager GX graphics driver (devg-smi5xx.so) */ - {"smi5xx", SDL_GF_ACCELERATED}, + {"smi5xx", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* Silicon Motion graphics driver (devg-smi7xx.so) */ - {"smi7xx", SDL_GF_ACCELERATED}, + {"smi7xx", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* SVGA unaccelerated gfx driver (devg-svga.so) */ - {"svga", SDL_GF_UNACCELERATED}, + {"svga", SDL_GF_UNACCELERATED | SDL_GF_LOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* nVidia TNT graphics driver (devg-tnt.so) */ - {"tnt", SDL_GF_ACCELERATED}, + {"tnt", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* VIA integrated graphics driver (devg-tvia.so) */ - {"tvia", SDL_GF_ACCELERATED}, + {"tvia", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* VIA UniChrome graphics driver (devg-unichrome.so) */ - {"unichrome", SDL_GF_ACCELERATED}, + {"unichrome", SDL_GF_ACCELERATED | SDL_GF_NOLOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* VESA unaccelerated gfx driver (devg-vesa.so) */ - {"vesa", SDL_GF_UNACCELERATED}, + {"vesa", SDL_GF_UNACCELERATED | SDL_GF_LOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* VmWare graphics driver (devg-volari.so) */ - {"vmware", SDL_GF_ACCELERATED}, + {"vmware", SDL_GF_ACCELERATED | SDL_GF_LOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* XGI XP10 graphics driver (devg-volari.so) */ - {"volari", SDL_GF_ACCELERATED}, + {"volari", SDL_GF_ACCELERATED | SDL_GF_LOWRESOLUTION | + SDL_GF_UNACCELERATED_3D}, /* End of list */ - {NULL, 0x00000000} + {NULL, 0x00000000} }; /*****************************************************************************/ @@ -314,7 +343,7 @@ int qnxgf_videoinit(_THIS) { /* video initialization problem */ SDL_free(didata); - SDL_SetError("display query failed"); + SDL_SetError("GF: Display query failed"); return -1; } @@ -324,7 +353,7 @@ int qnxgf_videoinit(_THIS) { /* video initialization problem */ SDL_free(didata); - SDL_SetError("couldn't attach to display"); + SDL_SetError("GF: Couldn't attach to display"); return -1; } @@ -335,7 +364,7 @@ int qnxgf_videoinit(_THIS) status=gf_layer_attach(&didata->layer, didata->display, didata->display_info.main_layer_index, 0); if (status!=GF_ERR_OK) { - SDL_SetError("couldn't attach to main layer, it could be busy"); + SDL_SetError("GF: Couldn't attach to main layer, it could be busy"); /* Failed to attach to main layer */ return -1; @@ -432,6 +461,16 @@ void qnxgf_getdisplaymodes(_THIS) break; } + /* Check if driver do not supports doublescan video modes */ + if ((didata->caps & SDL_GF_LOWRESOLUTION)!=SDL_GF_LOWRESOLUTION) + { + if (generic_mode[jt].w<640) + { + jt++; + continue; + } + } + mode.w=generic_mode[jt].w; mode.h=generic_mode[jt].h; mode.refresh_rate=generic_mode[jt].refresh_rate; @@ -597,7 +636,7 @@ int qnxgf_setdisplaymode(_THIS, SDL_DisplayMode* mode) if (result!=GF_ERR_OK) { /* Display mode/resolution switch has been failed */ - SDL_SetError("mode is not supported by graphics driver"); + SDL_SetError("GF: Mode is not supported by graphics driver"); return -1; } else @@ -610,7 +649,7 @@ int qnxgf_setdisplaymode(_THIS, SDL_DisplayMode* mode) result=gf_layer_attach(&didata->layer, didata->display, didata->display_info.main_layer_index, 0); if (result!=GF_ERR_OK) { - SDL_SetError("couldn't attach to main layer, it could be busy"); + SDL_SetError("GF: Couldn't attach to main layer, it could be busy"); /* Failed to attach to main displayable layer */ return -1; @@ -674,8 +713,10 @@ int qnxgf_getdisplaygammaramp(_THIS, Uint16* ramp) int qnxgf_createwindow(_THIS, SDL_Window* window) { + SDL_VideoData* gfdata=(SDL_VideoData*)_this->driverdata; SDL_DisplayData* didata=(SDL_DisplayData*)SDL_CurrentDisplay.driverdata; SDL_WindowData* wdata; + int32_t status; /* QNX GF supports fullscreen window modes only */ if ((window->flags & SDL_WINDOW_FULLSCREEN)!=SDL_WINDOW_FULLSCREEN) @@ -705,7 +746,7 @@ int qnxgf_createwindow(_THIS, SDL_Window* window) /* Check if end of display list has been reached */ if (mode.refresh_rate==0x0000FFFF) { - SDL_SetError("desired video mode is not supported"); + SDL_SetError("GF: Desired video mode is not supported"); /* Failed to create new window */ return -1; @@ -716,7 +757,12 @@ int qnxgf_createwindow(_THIS, SDL_Window* window) window->flags|=SDL_WINDOW_FULLSCREEN; /* Setup fullscreen mode, bpp used from desktop mode in this case */ - qnxgf_setdisplaymode(_this, &mode); + status=qnxgf_setdisplaymode(_this, &mode); + if (status!=0) + { + /* Failed to swith fullscreen video mode */ + return -1; + } } } @@ -744,8 +790,37 @@ int qnxgf_createwindow(_THIS, SDL_Window* window) /* Check if window must support OpenGL ES rendering */ if ((window->flags & SDL_WINDOW_OPENGL)==SDL_WINDOW_OPENGL) { - /* Mark this window as OpenGL ES compatible */ - wdata->uses_gles=SDL_TRUE; + #if defined(SDL_VIDEO_OPENGL_ES) + EGLBoolean initstatus; + + /* Mark this window as OpenGL ES compatible */ + wdata->uses_gles=SDL_TRUE; + + /* Create connection to OpenGL ES */ + if (gfdata->egldisplay==EGL_NO_DISPLAY) + { + gfdata->egldisplay=eglGetDisplay(gfdata->gfdev); + if (gfdata->egldisplay==EGL_NO_DISPLAY) + { + SDL_SetError("GF: Can't get connection to OpenGL ES"); + return -1; + } + + /* Initialize OpenGL ES library, ignore EGL version */ + initstatus=eglInitialize(gfdata->egldisplay, NULL, NULL); + if (initstatus!=EGL_TRUE) + { + SDL_SetError("GF: Can't init OpenGL ES library"); + return -1; + } + } + + /* Increment GL ES reference count usage */ + gfdata->egl_refcount++; + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return -1; + #endif /* SDL_VIDEO_OPENGL_ES */ } /* Window has been successfully created */ @@ -804,11 +879,37 @@ void qnxgf_setwindowgrab(_THIS, SDL_Window* window) void qnxgf_destroywindow(_THIS, SDL_Window* window) { + SDL_VideoData* gfdata=(SDL_VideoData*)_this->driverdata; SDL_DisplayData* didata=(SDL_DisplayData*)SDL_CurrentDisplay.driverdata; SDL_WindowData* wdata=(SDL_WindowData*)window->driverdata; if (wdata!=NULL) { + #if defined(SDL_VIDEO_OPENGL_ES) + /* Destroy OpenGL ES surface if it was created */ + if (wdata->gles_surface!=EGL_NO_SURFACE) + { + eglDestroySurface(gfdata->egldisplay, wdata->gles_surface); + } + + /* Free any 3D target if it was created before */ + if (wdata->target_created==SDL_TRUE) + { + gf_3d_target_free(wdata->target); + } + + + gfdata->egl_refcount--; + if (gfdata->egl_refcount==0) + { + /* Terminate connection to OpenGL ES */ + if (gfdata->egldisplay!=EGL_NO_DISPLAY) + { + eglTerminate(gfdata->egldisplay); + gfdata->egldisplay=EGL_NO_DISPLAY; + } + } + #endif /* SDL_VIDEO_OPENGL_ES */ } } @@ -826,7 +927,7 @@ SDL_bool qnxgf_getwindowwminfo(_THIS, SDL_Window* window, struct SDL_SysWMinfo* } else { - SDL_SetError("application not compiled with SDL %d.%d\n", SDL_MAJOR_VERSION, SDL_MINOR_VERSION); + SDL_SetError("Application not compiled with SDL %d.%d\n", SDL_MAJOR_VERSION, SDL_MINOR_VERSION); return SDL_FALSE; } @@ -839,50 +940,382 @@ SDL_bool qnxgf_getwindowwminfo(_THIS, SDL_Window* window, struct SDL_SysWMinfo* /*****************************************************************************/ int qnxgf_gl_loadlibrary(_THIS, const char* path) { - /* Failed to load new GL library */ - return -1; + #if defined(SDL_VIDEO_OPENGL_ES) + /* Check if OpenGL ES library is specified for GF driver */ + if (path==NULL) + { + path=SDL_getenv("SDL_OPENGL_LIBRARY"); + if (path==NULL) + { + path=SDL_getenv("SDL_OPENGLES_LIBRARY"); + } + } + + /* Check if default library loading requested */ + if (path==NULL) + { + /* Already linked with GF library which provides egl* subset of */ + /* functions, use Common profile of OpenGL ES library by default */ + path="/usr/lib/libGLES_CM.so.1"; + } + + /* Load dynamic library */ + _this->gl_config.dll_handle=SDL_LoadObject(path); + if (!_this->gl_config.dll_handle) + { + /* Failed to load new GL ES library */ + SDL_SetError("GF: Failed to locate OpenGL ES library"); + return -1; + } + + /* Store OpenGL ES library path and name */ + SDL_strlcpy(_this->gl_config.driver_path, path, SDL_arraysize(_this->gl_config.driver_path)); + + /* New OpenGL ES library is loaded */ + return 0; + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return -1; + #endif /* SDL_VIDEO_OPENGL_ES */ } void* qnxgf_gl_getprocaddres(_THIS, const char* proc) { - /* Failed to get GL function address pointer */ - return NULL; + #if defined(SDL_VIDEO_OPENGL_ES) + void* function_address; + + /* Try to get function address through the egl interface */ + function_address=eglGetProcAddress(proc); + if (function_address!=NULL) + { + return function_address; + } + + /* Then try to get function in the OpenGL ES library */ + if (_this->gl_config.dll_handle) + { + function_address=SDL_LoadFunction(_this->gl_config.dll_handle, proc); + if (function_address!=NULL) + { + return function_address; + } + } + + /* Failed to get GL ES function address pointer */ + SDL_SetError("GF: Cannot locate given function name"); + return NULL; + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return NULL; + #endif /* SDL_VIDEO_OPENGL_ES */ } void qnxgf_gl_unloadlibrary(_THIS) { + #if defined(SDL_VIDEO_OPENGL_ES) + /* Unload OpenGL ES library */ + if (_this->gl_config.dll_handle) + { + SDL_UnloadObject(_this->gl_config.dll_handle); + _this->gl_config.dll_handle=NULL; + } + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return; + #endif /* SDL_VIDEO_OPENGL_ES */ } SDL_GLContext qnxgf_gl_createcontext(_THIS, SDL_Window* window) { - /* Failed to create GL context */ - return NULL; + #if defined(SDL_VIDEO_OPENGL_ES) + SDL_VideoData* gfdata=(SDL_VideoData*)_this->driverdata; + SDL_WindowData* wdata=(SDL_WindowData*)window->driverdata; + SDL_DisplayData* didata=(SDL_DisplayData*)SDL_CurrentDisplay.driverdata; + EGLBoolean status; + int32_t gfstatus; + EGLint configs; + uint32_t surfaces; + uint32_t attr_pos; + + /* Prepare attributes list to pass them to OpenGL ES */ + attr_pos=0; + wdata->gles_attributes[attr_pos++]=EGL_NATIVE_VISUAL_ID; + wdata->gles_attributes[attr_pos++]=qnxgf_sdl_to_gf_pixelformat(didata->current_mode.format); + wdata->gles_attributes[attr_pos++]=EGL_RED_SIZE; + wdata->gles_attributes[attr_pos++]=_this->gl_config.red_size; + wdata->gles_attributes[attr_pos++]=EGL_GREEN_SIZE; + wdata->gles_attributes[attr_pos++]=_this->gl_config.green_size; + wdata->gles_attributes[attr_pos++]=EGL_BLUE_SIZE; + wdata->gles_attributes[attr_pos++]=_this->gl_config.blue_size; + wdata->gles_attributes[attr_pos++]=EGL_ALPHA_SIZE; + if (_this->gl_config.alpha_size) + { + wdata->gles_attributes[attr_pos++]=_this->gl_config.alpha_size; + } + else + { + wdata->gles_attributes[attr_pos++]=EGL_DONT_CARE; + } + wdata->gles_attributes[attr_pos++]=EGL_DEPTH_SIZE; + wdata->gles_attributes[attr_pos++]=_this->gl_config.depth_size; + if (_this->gl_config.buffer_size) + { + wdata->gles_attributes[attr_pos++]=EGL_BUFFER_SIZE; + wdata->gles_attributes[attr_pos++]=_this->gl_config.buffer_size; + } + if (_this->gl_config.stencil_size) + { + wdata->gles_attributes[attr_pos++]=EGL_STENCIL_SIZE; + wdata->gles_attributes[attr_pos++]=_this->gl_config.buffer_size; + } + + /* OpenGL ES 1.0 uses double buffer by default, so if application */ + /* do not requested double buffering, switch to single buffer */ + if (!_this->gl_config.double_buffer) + { + wdata->gles_attributes[attr_pos++]=EGL_SINGLE_BUFFER; + wdata->gles_attributes[attr_pos++]=EGL_TRUE; + surfaces=1; + } + else + { + surfaces=2; + } + + /* Set number of samples in multisampling */ + if (_this->gl_config.multisamplesamples) + { + wdata->gles_attributes[attr_pos++]=EGL_SAMPLES; + wdata->gles_attributes[attr_pos++]=_this->gl_config.multisamplesamples; + } + + /* Multisample buffers, OpenGL ES 1.0 spec defines 0 or 1 buffer */ + if (_this->gl_config.multisamplebuffers) + { + wdata->gles_attributes[attr_pos++]=EGL_SAMPLE_BUFFERS; + wdata->gles_attributes[attr_pos++]=_this->gl_config.multisamplebuffers; + } + + /* Finish attributes list */ + wdata->gles_attributes[attr_pos]=EGL_NONE; + + /* Request first suitable framebuffer configuration */ + status=eglChooseConfig(gfdata->egldisplay, wdata->gles_attributes, &wdata->gles_config, 1, &configs); + if (status!=EGL_TRUE) + { + SDL_SetError("GF: Can't find closest configuration for OpenGL ES"); + return NULL; + } + + /* Create OpenGL ES context */ + wdata->gles_context=eglCreateContext(gfdata->egldisplay, wdata->gles_config, EGL_NO_CONTEXT, NULL); + if (wdata->gles_context==EGL_NO_CONTEXT) + { + SDL_SetError("GF: OpenGL ES context creation has been failed"); + return NULL; + } + + /* Free any 3D target if it was created before */ + if (wdata->target_created==SDL_TRUE) + { + gf_3d_target_free(wdata->target); + } + + /* Create surface(s) target for OpenGL ES */ + gfstatus=gf_3d_target_create(&wdata->target, didata->layer, NULL, + surfaces, didata->current_mode.w, didata->current_mode.h, + qnxgf_sdl_to_gf_pixelformat(didata->current_mode.format)); + + if (gfstatus!=GF_ERR_OK) + { + /* Destroy just created context */ + eglDestroyContext(gfdata->egldisplay, wdata->gles_context); + wdata->gles_context=EGL_NO_CONTEXT; + + /* Mark 3D target as unallocated */ + wdata->target_created=SDL_FALSE; + SDL_SetError("GF: OpenGL ES target could not be created"); + return NULL; + } + else + { + wdata->target_created=SDL_TRUE; + } + + /* Create target rendering surface on whole screen */ + wdata->gles_surface=eglCreateWindowSurface(gfdata->egldisplay, wdata->gles_config, wdata->target, NULL); + if (wdata->gles_surface==EGL_NO_SURFACE) + { + /* Destroy 3d target */ + gf_3d_target_free(wdata->target); + wdata->target_created=SDL_FALSE; + + /* Destroy OpenGL ES context */ + eglDestroyContext(gfdata->egldisplay, wdata->gles_context); + wdata->gles_context=EGL_NO_CONTEXT; + + SDL_SetError("GF: OpenGL ES surface could not be created"); + return NULL; + } + + /* Make just created context current */ + status=eglMakeCurrent(gfdata->egldisplay, wdata->gles_surface, wdata->gles_surface, wdata->gles_context); + if (status!=EGL_TRUE) + { + /* Destroy OpenGL ES surface */ + eglDestroySurface(gfdata->egldisplay, wdata->gles_surface); + + /* Destroy 3d target */ + gf_3d_target_free(wdata->target); + wdata->target_created=SDL_FALSE; + + /* Destroy OpenGL ES context */ + eglDestroyContext(gfdata->egldisplay, wdata->gles_context); + wdata->gles_context=EGL_NO_CONTEXT; + + /* Failed to set current GL ES context */ + SDL_SetError("GF: Can't set OpenGL ES context on creation"); + return NULL; + } + + /* Setup into SDL internals state of OpenGL ES: */ + /* it is accelerated or not */ + if ((didata->caps & SDL_GF_ACCELERATED_3D)==SDL_GF_ACCELERATED_3D) + { + _this->gl_config.accelerated=1; + } + else + { + _this->gl_config.accelerated=0; + } + + /* Always clear stereo enable, since OpenGL ES do not supports stereo */ + _this->gl_config.stereo=0; + + /* Failed to create GL ES context */ + return wdata->gles_context; + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return NULL; + #endif /* SDL_VIDEO_OPENGL_ES */ } int qnxgf_gl_makecurrent(_THIS, SDL_Window* window, SDL_GLContext context) { - /* Failed to set current GL context */ - return -1; + #if defined(SDL_VIDEO_OPENGL_ES) + SDL_VideoData* gfdata=(SDL_VideoData*)_this->driverdata; + SDL_WindowData* wdata; + EGLBoolean status; + + if ((window==NULL) && (context==NULL)) + { + status=eglMakeCurrent(gfdata->egldisplay, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT); + if (status!=EGL_TRUE) + { + /* Failed to set current GL ES context */ + SDL_SetError("GF: Can't set OpenGL ES context"); + return -1; + } + } + else + { + wdata=(SDL_WindowData*)window->driverdata; + status=eglMakeCurrent(gfdata->egldisplay, wdata->gles_surface, wdata->gles_surface, wdata->gles_context); + if (status!=EGL_TRUE) + { + /* Failed to set current GL ES context */ + SDL_SetError("GF: Can't set OpenGL ES context"); + return -1; + } + } + + return 0; + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return -1; + #endif /* SDL_VIDEO_OPENGL_ES */ } int qnxgf_gl_setswapinterval(_THIS, int interval) { - /* Failed to set swap interval */ - return -1; + #if defined(SDL_VIDEO_OPENGL_ES) + SDL_VideoData* gfdata=(SDL_VideoData*)_this->driverdata; + EGLBoolean status; + + /* Check if OpenGL ES connection has been initialized */ + if (gfdata->egldisplay!=EGL_NO_DISPLAY) + { + /* Set swap OpenGL ES interval */ + status=eglSwapInterval(gfdata->egldisplay, interval); + if (status==EGL_TRUE) + { + /* Return success to upper level */ + gfdata->swapinterval=interval; + return 0; + } + } + + /* Failed to set swap interval */ + SDL_SetError("GF: Cannot set swap interval"); + return -1; + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return -1; + #endif /* SDL_VIDEO_OPENGL_ES */ } int qnxgf_gl_getswapinterval(_THIS) { - /* Failed to get default swap interval */ - return -1; + #if defined(SDL_VIDEO_OPENGL_ES) + SDL_VideoData* gfdata=(SDL_VideoData*)_this->driverdata; + + /* Return default swap interval value */ + return gfdata->swapinterval; + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return -1; + #endif /* SDL_VIDEO_OPENGL_ES */ } void qnxgf_gl_swapwindow(_THIS, SDL_Window* window) { + #if defined(SDL_VIDEO_OPENGL_ES) + SDL_VideoData* gfdata=(SDL_VideoData*)_this->driverdata; + SDL_WindowData* wdata=(SDL_WindowData*)window->driverdata; + + eglSwapBuffers(gfdata->egldisplay, wdata->gles_surface); + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return; + #endif /* SDL_VIDEO_OPENGL_ES */ } void qnxgf_gl_deletecontext(_THIS, SDL_GLContext context) { + #if defined(SDL_VIDEO_OPENGL_ES) + SDL_VideoData* gfdata=(SDL_VideoData*)_this->driverdata; + EGLBoolean status; + + /* Check if OpenGL ES connection has been initialized */ + if (gfdata->egldisplay!=EGL_NO_DISPLAY) + { + if (context!=EGL_NO_CONTEXT) + { + status=eglDestroyContext(gfdata->egldisplay, context); + if (status!=EGL_TRUE) + { + /* Error during OpenGL ES context destroying */ + SDL_SetError("GF: OpenGL ES context destroy error"); + return; + } + } + } + + return; + #else + SDL_SetError("GF: OpenGL ES support is not compiled in"); + return; + #endif /* SDL_VIDEO_OPENGL_ES */ } /*****************************************************************************/ diff --git a/src/video/qnxgf/SDL_qnxgf.h b/src/video/qnxgf/SDL_qnxgf.h index 08814bf4b..b080ac145 100644 --- a/src/video/qnxgf/SDL_qnxgf.h +++ b/src/video/qnxgf/SDL_qnxgf.h @@ -30,12 +30,22 @@ #include "../SDL_sysvideo.h" #include +#include + +#if defined(SDL_VIDEO_OPENGL_ES) + #include +#endif /* SDL_VIDEO_OPENGL_ES */ typedef struct SDL_VideoData { gf_dev_t gfdev; /* GF device handle */ gf_dev_info_t gfdev_info; /* GF device information */ SDL_bool gfinitialized; /* GF device initialization status */ + #if defined(SDL_VIDEO_OPENGL_ES) + EGLDisplay egldisplay; /* OpenGL ES display connection */ + uint32_t egl_refcount; /* OpenGL ES reference count */ + uint32_t swapinterval; /* OpenGL ES default swap interval */ + #endif /* SDL_VIDEO_OPENGL_ES */ } SDL_VideoData; #define SDL_VIDEO_GF_DEVICENAME_MAX 257 @@ -55,9 +65,23 @@ typedef struct SDL_DisplayData typedef struct SDL_WindowData { - SDL_bool uses_gles; /* if true window must support OpenGL ES*/ + SDL_bool uses_gles; /* true if window support OpenGL ES */ + #if defined(SDL_VIDEO_OPENGL_ES) + gf_3d_target_t target; /* OpenGL ES window target */ + SDL_bool target_created; /* GF 3D target is created if true */ + EGLConfig gles_config; /* OpenGL ES framebuffer configuration*/ + EGLContext gles_context; /* OpenGL ES context */ + EGLint gles_attributes[256]; /* OpenGL ES attributes for context */ + EGLSurface gles_surface; /* OpenGL ES target rendering surface */ + #endif /* SDL_VIDEO_OPENGL_ES */ } SDL_WindowData; +typedef struct SDL_GLDriverData +{ + #if defined(SDL_VIDEO_OPENGL_ES) + #endif /* SDL_VIDEO_OPENGL_ES */ +} SDL_GLDriverData; + /****************************************************************************/ /* Low level GF graphics driver capabilities */ /****************************************************************************/ @@ -69,6 +93,10 @@ typedef struct GF_DeviceCaps #define SDL_GF_UNACCELERATED 0x00000000 #define SDL_GF_ACCELERATED 0x00000001 +#define SDL_GF_NOLOWRESOLUTION 0x00000000 +#define SDL_GF_LOWRESOLUTION 0x00000002 +#define SDL_GF_UNACCELERATED_3D 0x00000000 +#define SDL_GF_ACCELERATED_3D 0x00000004 /****************************************************************************/ /* SDL_VideoDevice functions declaration */ diff --git a/test/testdyngles.c b/test/testdyngles.c index e63d32179..2539363fc 100644 --- a/test/testdyngles.c +++ b/test/testdyngles.c @@ -65,7 +65,7 @@ typedef struct void (APIENTRY * glClear) (GLbitfield); void (APIENTRY * glDisable) (GLenum); void (APIENTRY * glEnable) (GLenum); - void (APIENTRY * glColor4ub) (GLubyte, GLubyte, GLubyte, GLubyte); + void (APIENTRY * glColor4f) (GLfloat, GLfloat, GLfloat, GLfloat); void (APIENTRY * glPointSize) (GLfloat); void (APIENTRY * glHint) (GLenum, GLenum); void (APIENTRY * glBlendFunc) (GLenum, GLenum); @@ -89,7 +89,7 @@ init_glfuncs(glfuncs * f) f->glClear = get_funcaddr("glClear"); f->glDisable = get_funcaddr("glDisable"); f->glEnable = get_funcaddr("glEnable"); - f->glColor4ub = get_funcaddr("glColor4ub"); + f->glColor4f = get_funcaddr("glColor4f"); f->glPointSize = get_funcaddr("glPointSize"); f->glHint = get_funcaddr("glHint"); f->glBlendFunc = get_funcaddr("glBlendFunc"); @@ -118,6 +118,10 @@ main(int argc, char *argv[]) /* you may want to change these according to the platform */ video_w = 320; video_h = 480; + #ifdef __QNXNTO__ + video_h = 640; + video_w = 480; + #endif /* __QNXNTO__ */ if (argv[1]) { gl_library = argv[1]; @@ -149,7 +153,11 @@ main(int argc, char *argv[]) pixels[3 * i + 2] = rand() % 250 - 125; } - f.glViewport(0, 0, video_w, video_h); + #ifdef __QNXNTO__ + f.glViewport(0, 0, video_h, video_w); + #else + f.glViewport(0, 0, video_w, video_h); + #endif /* __QNXNTO__ */ f.glMatrixMode(GL_PROJECTION); f.glLoadIdentity(); @@ -180,7 +188,7 @@ main(int argc, char *argv[]) f.glRotatef(2.0, 1.0, 1.0, 1.0); f.glRotatef(1.0, 0.0, 1.0, 1.0); - f.glColor4ub(255, 255, 255, 255); + f.glColor4f(1.0, 1.0, 1.0, 1.0); f.glEnableClientState(GL_VERTEX_ARRAY); f.glVertexPointer(3, GL_FLOAT, 0, pixels); @@ -189,6 +197,8 @@ main(int argc, char *argv[]) SDL_GL_SwapBuffers(); while (SDL_PollEvent(&event)) { + if (event.type == SDL_QUIT) + done = 1; if (event.type == SDL_KEYDOWN) done = 1; } diff --git a/test/testgl2.c b/test/testgl2.c index 2369b5659..d6a36b149 100644 --- a/test/testgl2.c +++ b/test/testgl2.c @@ -168,6 +168,7 @@ main(int argc, char *argv[]) SDL_DisplayMode mode; SDL_Event event; Uint32 then, now, frames; + int status; /* Initialize parameters */ fsaa = 0; @@ -241,26 +242,52 @@ main(int argc, char *argv[]) printf("Extensions : %s\n", glGetString(GL_EXTENSIONS)); printf("\n"); - SDL_GL_GetAttribute(SDL_GL_RED_SIZE, &value); - printf("SDL_GL_RED_SIZE: requested %d, got %d\n", 5, value); - SDL_GL_GetAttribute(SDL_GL_GREEN_SIZE, &value); - printf("SDL_GL_GREEN_SIZE: requested %d, got %d\n", 5, value); - SDL_GL_GetAttribute(SDL_GL_BLUE_SIZE, &value); - printf("SDL_GL_BLUE_SIZE: requested %d, got %d\n", 5, value); - SDL_GL_GetAttribute(SDL_GL_DEPTH_SIZE, &value); - printf("SDL_GL_DEPTH_SIZE: requested %d, got %d\n", 16, value); - SDL_GL_GetAttribute(SDL_GL_DOUBLEBUFFER, &value); - printf("SDL_GL_DOUBLEBUFFER: requested 1, got %d\n", value); + status=SDL_GL_GetAttribute(SDL_GL_RED_SIZE, &value); + if (!status) { + printf("SDL_GL_RED_SIZE: requested %d, got %d\n", 5, value); + } else { + printf("Failed to get SDL_GL_RED_SIZE: %s\n", SDL_GetError()); + } + status=SDL_GL_GetAttribute(SDL_GL_GREEN_SIZE, &value); + if (!status) { + printf("SDL_GL_GREEN_SIZE: requested %d, got %d\n", 5, value); + } else { + printf("Failed to get SDL_GL_GREEN_SIZE: %s\n", SDL_GetError()); + } + status=SDL_GL_GetAttribute(SDL_GL_BLUE_SIZE, &value); + if (!status) { + printf("SDL_GL_BLUE_SIZE: requested %d, got %d\n", 5, value); + } else { + printf("Failed to get SDL_GL_BLUE_SIZE: %s\n", SDL_GetError()); + } + status=SDL_GL_GetAttribute(SDL_GL_DEPTH_SIZE, &value); + if (!status) { + printf("SDL_GL_DEPTH_SIZE: requested %d, got %d\n", 16, value); + } else { + printf("Failed to get SDL_GL_DEPTH_SIZE: %s\n", SDL_GetError()); + } if (fsaa) { - SDL_GL_GetAttribute(SDL_GL_MULTISAMPLEBUFFERS, &value); - printf("SDL_GL_MULTISAMPLEBUFFERS: requested 1, got %d\n", value); - SDL_GL_GetAttribute(SDL_GL_MULTISAMPLESAMPLES, &value); - printf("SDL_GL_MULTISAMPLESAMPLES: requested %d, got %d\n", fsaa, - value); + status=SDL_GL_GetAttribute(SDL_GL_MULTISAMPLEBUFFERS, &value); + if (!status) { + printf("SDL_GL_MULTISAMPLEBUFFERS: requested 1, got %d\n", value); + } else { + printf("Failed to get SDL_GL_MULTISAMPLEBUFFERS: %s\n", SDL_GetError()); + } + status=SDL_GL_GetAttribute(SDL_GL_MULTISAMPLESAMPLES, &value); + if (!status) { + printf("SDL_GL_MULTISAMPLESAMPLES: requested %d, got %d\n", fsaa, value); + } else { + printf("Failed to get SDL_GL_MULTISAMPLESAMPLES: %s\n", SDL_GetError()); + } } if (accel) { - SDL_GL_GetAttribute(SDL_GL_ACCELERATED_VISUAL, &value); - printf("SDL_GL_ACCELERATED_VISUAL: requested 1, got %d\n", value); + status=SDL_GL_GetAttribute(SDL_GL_ACCELERATED_VISUAL, &value); + if (!status) + { + printf("SDL_GL_ACCELERATED_VISUAL: requested 1, got %d\n", value); + } else { + printf("Failed to get SDL_GL_ACCELERATED_VISUAL: %s\n", SDL_GetError()); + } } /* Set rendering settings */ diff --git a/test/testgles.c b/test/testgles.c index 3b539ef85..fb33afcb2 100644 --- a/test/testgles.c +++ b/test/testgles.c @@ -88,6 +88,7 @@ main(int argc, char *argv[]) SDL_DisplayMode mode; SDL_Event event; Uint32 then, now, frames; + int status; /* Initialize parameters */ fsaa = 0; @@ -160,24 +161,52 @@ main(int argc, char *argv[]) printf("Extensions : %s\n", glGetString(GL_EXTENSIONS)); printf("\n"); - SDL_GL_GetAttribute(SDL_GL_RED_SIZE, &value); - printf("SDL_GL_RED_SIZE: requested %d, got %d\n", 5, value); - SDL_GL_GetAttribute(SDL_GL_GREEN_SIZE, &value); - printf("SDL_GL_GREEN_SIZE: requested %d, got %d\n", 5, value); - SDL_GL_GetAttribute(SDL_GL_BLUE_SIZE, &value); - printf("SDL_GL_BLUE_SIZE: requested %d, got %d\n", 5, value); - SDL_GL_GetAttribute(SDL_GL_DEPTH_SIZE, &value); - printf("SDL_GL_DEPTH_SIZE: requested %d, got %d\n", 16, value); + status=SDL_GL_GetAttribute(SDL_GL_RED_SIZE, &value); + if (!status) { + printf("SDL_GL_RED_SIZE: requested %d, got %d\n", 5, value); + } else { + printf("Failed to get SDL_GL_RED_SIZE: %s\n", SDL_GetError()); + } + status=SDL_GL_GetAttribute(SDL_GL_GREEN_SIZE, &value); + if (!status) { + printf("SDL_GL_GREEN_SIZE: requested %d, got %d\n", 5, value); + } else { + printf("Failed to get SDL_GL_GREEN_SIZE: %s\n", SDL_GetError()); + } + status=SDL_GL_GetAttribute(SDL_GL_BLUE_SIZE, &value); + if (!status) { + printf("SDL_GL_BLUE_SIZE: requested %d, got %d\n", 5, value); + } else { + printf("Failed to get SDL_GL_BLUE_SIZE: %s\n", SDL_GetError()); + } + status=SDL_GL_GetAttribute(SDL_GL_DEPTH_SIZE, &value); + if (!status) { + printf("SDL_GL_DEPTH_SIZE: requested %d, got %d\n", 16, value); + } else { + printf("Failed to get SDL_GL_DEPTH_SIZE: %s\n", SDL_GetError()); + } if (fsaa) { - SDL_GL_GetAttribute(SDL_GL_MULTISAMPLEBUFFERS, &value); - printf("SDL_GL_MULTISAMPLEBUFFERS: requested 1, got %d\n", value); - SDL_GL_GetAttribute(SDL_GL_MULTISAMPLESAMPLES, &value); - printf("SDL_GL_MULTISAMPLESAMPLES: requested %d, got %d\n", fsaa, - value); + status=SDL_GL_GetAttribute(SDL_GL_MULTISAMPLEBUFFERS, &value); + if (!status) { + printf("SDL_GL_MULTISAMPLEBUFFERS: requested 1, got %d\n", value); + } else { + printf("Failed to get SDL_GL_MULTISAMPLEBUFFERS: %s\n", SDL_GetError()); + } + status=SDL_GL_GetAttribute(SDL_GL_MULTISAMPLESAMPLES, &value); + if (!status) { + printf("SDL_GL_MULTISAMPLESAMPLES: requested %d, got %d\n", fsaa, value); + } else { + printf("Failed to get SDL_GL_MULTISAMPLESAMPLES: %s\n", SDL_GetError()); + } } if (accel) { - SDL_GL_GetAttribute(SDL_GL_ACCELERATED_VISUAL, &value); - printf("SDL_GL_ACCELERATED_VISUAL: requested 1, got %d\n", value); + status=SDL_GL_GetAttribute(SDL_GL_ACCELERATED_VISUAL, &value); + if (!status) + { + printf("SDL_GL_ACCELERATED_VISUAL: requested 1, got %d\n", value); + } else { + printf("Failed to get SDL_GL_ACCELERATED_VISUAL: %s\n", SDL_GetError()); + } } /* Set rendering settings */ diff --git a/test/testmultiaudio.c b/test/testmultiaudio.c index 3c86dc19f..5d6fc04bf 100644 --- a/test/testmultiaudio.c +++ b/test/testmultiaudio.c @@ -55,7 +55,7 @@ test_multi_audio(int devcount) spec.userdata = &cbd[0]; cbd[0].dev = SDL_OpenAudioDevice(devname, 0, &spec, NULL, 0); if (cbd[0].dev == 0) { - printf("Open device failed: %s\n", SDL_GetError()); + printf("\nOpen device failed: %s\n", SDL_GetError()); } else { SDL_PauseAudioDevice(cbd[0].dev, 0); while (!cbd[0].done)