/* Simple DirectMedia Layer Copyright (C) 1997-2013 Sam Lantinga This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. */ /** * \file SDL_hints.h * * Official documentation for SDL configuration variables * * This file contains functions to set and get configuration hints, * as well as listing each of them alphabetically. * * The convention for naming hints is SDL_HINT_X, where "SDL_X" is * the environment variable that can be used to override the default. * * In general these hints are just that - they may or may not be * supported or applicable on any given platform, but they provide * a way for an application or user to give the library a hint as * to how they would like the library to work. */ #ifndef _SDL_hints_h #define _SDL_hints_h #include "SDL_stdinc.h" #include "begin_code.h" /* Set up for C function definitions, even when using C++ */ #ifdef __cplusplus extern "C" { #endif /** * \brief A variable controlling how 3D acceleration is used to accelerate the SDL screen surface. * * SDL can try to accelerate the SDL screen surface by using streaming * textures with a 3D rendering engine. This variable controls whether and * how this is done. * * This variable can be set to the following values: * "0" - Disable 3D acceleration * "1" - Enable 3D acceleration, using the default renderer. * "X" - Enable 3D acceleration, using X where X is one of the valid rendering drivers. (e.g. "direct3d", "opengl", etc.) * * By default SDL tries to make a best guess for each platform whether * to use acceleration or not. */ #define SDL_HINT_FRAMEBUFFER_ACCELERATION "SDL_FRAMEBUFFER_ACCELERATION" /** * \brief A variable specifying which render driver to use. * * If the application doesn't pick a specific renderer to use, this variable * specifies the name of the preferred renderer. If the preferred renderer * can't be initialized, the normal default renderer is used. * * This variable is case insensitive and can be set to the following values: * "direct3d" * "opengl" * "opengles2" * "opengles" * "software" * * The default varies by platform, but it's the first one in the list that * is available on the current platform. */ #define SDL_HINT_RENDER_DRIVER "SDL_RENDER_DRIVER" /** * \brief A variable controlling whether the OpenGL render driver uses shaders if they are available. * * This variable can be set to the following values: * "0" - Disable shaders * "1" - Enable shaders * * By default shaders are used if OpenGL supports them. */ #define SDL_HINT_RENDER_OPENGL_SHADERS "SDL_RENDER_OPENGL_SHADERS" /** * \brief A variable controlling whether the Direct3D device is initialized for thread-safe operations. * * This variable can be set to the following values: * "0" - Thread-safety is not enabled (faster) * "1" - Thread-safety is enabled * * By default the Direct3D device is created with thread-safety disabled. */ #define SDL_HINT_RENDER_DIRECT3D_THREADSAFE "SDL_RENDER_DIRECT3D_THREADSAFE" /** * \brief A variable controlling the scaling quality * * This variable can be set to the following values: * "0" or "nearest" - Nearest pixel sampling * "1" or "linear" - Linear filtering (supported by OpenGL and Direct3D) * "2" or "best" - Currently this is the same as "linear" * * By default nearest pixel sampling is used */ #define SDL_HINT_RENDER_SCALE_QUALITY "SDL_RENDER_SCALE_QUALITY" /** * \brief A variable controlling whether updates to the SDL screen surface should be synchronized with the vertical refresh, to avoid tearing. * * This variable can be set to the following values: * "0" - Disable vsync * "1" - Enable vsync * * By default SDL does not sync screen surface updates with vertical refresh. */ #define SDL_HINT_RENDER_VSYNC "SDL_RENDER_VSYNC" /** * \brief A variable controlling whether to enable Direct3D 11+'s Debug Layer. * * This variable does not have any effect on the Direct3D 9 based renderer, * which is used in Win32-based (aka Windows Desktop) apps. * * This variable can be set to the following values: * "0" - Disable Debug Layer use * "1" - Enable Debug Layer use * * By default, SDL does not use Direct3D Debug Layer. */ #define SDL_HINT_RENDER_DIRECT3D11_DEBUG "SDL_HINT_RENDER_DIRECT3D11_DEBUG" /** * \brief A variable controlling whether the X11 VidMode extension should be used. * * This variable can be set to the following values: * "0" - Disable XVidMode * "1" - Enable XVidMode * * By default SDL will use XVidMode if it is available. */ #define SDL_HINT_VIDEO_X11_XVIDMODE "SDL_VIDEO_X11_XVIDMODE" /** * \brief A variable controlling whether the X11 Xinerama extension should be used. * * This variable can be set to the following values: * "0" - Disable Xinerama * "1" - Enable Xinerama * * By default SDL will use Xinerama if it is available. */ #define SDL_HINT_VIDEO_X11_XINERAMA "SDL_VIDEO_X11_XINERAMA" /** * \brief A variable controlling whether the X11 XRandR extension should be used. * * This variable can be set to the following values: * "0" - Disable XRandR * "1" - Enable XRandR * * By default SDL will not use XRandR because of window manager issues. */ #define SDL_HINT_VIDEO_X11_XRANDR "SDL_VIDEO_X11_XRANDR" /** * \brief A variable controlling whether grabbing input grabs the keyboard * * This variable can be set to the following values: * "0" - Grab will affect only the mouse * "1" - Grab will affect mouse and keyboard * * By default SDL will not grab the keyboard so system shortcuts still work. */ #define SDL_HINT_GRAB_KEYBOARD "SDL_GRAB_KEYBOARD" /** * \brief Minimize your SDL_Window if it loses key focus when in Fullscreen mode. Defaults to true. * */ #define SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS "SDL_VIDEO_MINIMIZE_ON_FOCUS_LOSS" /** * \brief Set whether windows go fullscreen in their own spaces on Mac OS X * * This variable can be set to the following values: * "0" - Fullscreen windows will use the classic fullscreen mode * "1" - Fullscreen windows will use fullscreen spaces * * By default SDL will use the classic fullscreen mode. */ #define SDL_HINT_VIDEO_FULLSCREEN_SPACES "SDL_VIDEO_FULLSCREEN_SPACES" /** * \brief A variable controlling whether the idle timer is disabled on iOS. * * When an iOS app does not receive touches for some time, the screen is * dimmed automatically. For games where the accelerometer is the only input * this is problematic. This functionality can be disabled by setting this * hint. * * This variable can be set to the following values: * "0" - Enable idle timer * "1" - Disable idle timer */ #define SDL_HINT_IDLE_TIMER_DISABLED "SDL_IOS_IDLE_TIMER_DISABLED" /** * \brief A variable controlling which orientations are allowed on iOS. * * In some circumstances it is necessary to be able to explicitly control * which UI orientations are allowed. * * This variable is a space delimited list of the following values: * "LandscapeLeft", "LandscapeRight", "Portrait" "PortraitUpsideDown" */ #define SDL_HINT_ORIENTATIONS "SDL_IOS_ORIENTATIONS" /** * \brief A variable controlling whether an Android built-in accelerometer should be * listed as a joystick device, rather than listing actual joysticks only. * * This variable can be set to the following values: * "0" - List only real joysticks and accept input from them * "1" - List real joysticks along with the accelerometer as if it were a 3 axis joystick (the default). */ #define SDL_HINT_ACCEL_AS_JOY "SDL_ACCEL_AS_JOY" /** * \brief A variable that lets you disable the detection and use of Xinput gamepad devices * * The variable can be set to the following values: * "0" - Disable XInput timer (only uses direct input) * "1" - Enable XInput timer (the default) */ #define SDL_HINT_XINPUT_ENABLED "SDL_XINPUT_ENABLED" /** * \brief A variable that lets you manually hint extra gamecontroller db entries * * The variable should be newline delimited rows of gamecontroller config data, see SDL_gamecontroller.h * * This hint must be set before calling SDL_Init(SDL_INIT_GAMECONTROLLER) * You can update mappings after the system is initialized with SDL_GameControllerMappingForGUID() and SDL_GameControllerAddMapping() */ #define SDL_HINT_GAMECONTROLLERCONFIG "SDL_GAMECONTROLLERCONFIG" /** * \brief A variable that lets you enable joystick (and gamecontroller) events even when your app is in the background. * * The variable can be set to the following values: * "0" - Disable joystick & gamecontroller input events when the * application is in the background. * "1" - Enable joystick & gamecontroller input events when the * application is in the backgroumd. * * The default value is "0". This hint may be set at any time. */ #define SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS "SDL_JOYSTICK_ALLOW_BACKGROUND_EVENTS" /** * \brief If set to 0 then never set the top most bit on a SDL Window, even if the video mode expects it. * This is a debugging aid for developers and not expected to be used by end users. The default is "1" * * This variable can be set to the following values: * "0" - don't allow topmost * "1" - allow topmost */ #define SDL_HINT_ALLOW_TOPMOST "SDL_ALLOW_TOPMOST" /** * \brief A variable that controls the timer resolution, in milliseconds. * * The higher resolution the timer, the more frequently the CPU services * timer interrupts, and the more precise delays are, but this takes up * power and CPU time. This hint is only used on Windows 7 and earlier. * * See this blog post for more information: * http://randomascii.wordpress.com/2013/07/08/windows-timer-resolution-megawatts-wasted/ * * If this variable is set to "0", the system timer resolution is not set. * * The default value is "1". This hint may be set at any time. */ #define SDL_HINT_TIMER_RESOLUTION "SDL_TIMER_RESOLUTION" /** * \brief If set to 1, then do not allow high-DPI windows. ("Retina" on Mac) */ #define SDL_HINT_VIDEO_HIGHDPI_DISABLED "SDL_VIDEO_HIGHDPI_DISABLED" /** * \brief A variable that determines whether ctrl+click should generate a right-click event on Mac * * If present, holding ctrl while left clicking will generate a right click * event when on Mac. */ #define SDL_HINT_MAC_CTRL_CLICK_EMULATE_RIGHT_CLICK "SDL_MAC_CTRL_CLICK_EMULATE_RIGHT_CLICK" /** * \brief A variable specifying which shader compiler to preload when using the Chrome ANGLE binaries * * SDL has EGL and OpenGL ES2 support on Windows via the ANGLE project. It * can use two different sets of binaries, those compiled by the user from source * or those provided by the Chrome browser. In the later case, these binaries require * that SDL loads * * This variable can be set to the following values: * "d3dcompiler_46.dll" - default, best for Vista or later. * "d3dcompiler_43.dll" - for XP support. * "none" - do not load any library, useful if you compiled ANGLE from source and included the compiler in your binaries. * */ #define SDL_HINT_VIDEO_WIN_D3DCOMPILER "SDL_VIDEO_WIN_D3DCOMPILER" /** * \brief A URL to a WinRT app's privacy policy * * All network-enabled WinRT apps must make a privacy policy available to its * users. On Windows 8, 8.1, and RT, Microsoft mandates that this policy be * be available in the Windows Settings charm, as accessed from within the app. * SDL provides code to add a URL-based link there, which can point to the app's * privacy policy. * * To setup a URL to an app's privacy policy, set SDL_HINT_WINRT_PRIVACY_POLICY_URL * before calling any SDL_Init functions. The contents of the hint should * be a valid URL. For example, "http://www.example.com". * * The default value is "", which will prevent SDL from adding a privacy policy * link to the Settings charm. This hint should only be set during app init. * * The label text of an app's "Privacy Policy" link may be customized via another * hint, SDL_HINT_WINRT_PRIVACY_POLICY_LABEL. * * Please note that on Windows Phone, Microsoft does not provide standard UI * for displaying a privacy policy link, and as such, SDL_HINT_WINRT_PRIVACY_POLICY_URL * will not get used on that platform. Network-enabled phone apps should display * their privacy policy through some other, in-app means. */ #define SDL_HINT_WINRT_PRIVACY_POLICY_URL "SDL_HINT_WINRT_PRIVACY_POLICY_URL" /** \brief Label text for a WinRT app's privacy policy link * * Network-enabled WinRT apps must include a privacy policy. On Windows 8, 8.1, and RT, * Microsoft mandates that this policy be available via the Windows Settings charm. * SDL provides code to add a link there, with it's label text being set via the * optional hint, SDL_HINT_WINRT_PRIVACY_POLICY_LABEL. * * Please note that a privacy policy's contents are not set via this hint. A separate * hint, SDL_HINT_WINRT_PRIVACY_POLICY_URL, is used to link to the actual text of the * policy. * * The contents of this hint should be encoded as a UTF8 string. * * The default value is "Privacy Policy". This hint should only be set during app * initialization, preferably before any calls to SDL_Init. * * For additional information on linking to a privacy policy, see the documentation for * SDL_HINT_WINRT_PRIVACY_POLICY_URL. */ #define SDL_HINT_WINRT_PRIVACY_POLICY_LABEL "SDL_HINT_WINRT_PRIVACY_POLICY_LABEL" /** \brief If set to 1, back button press events on Windows Phone 8+ will be marked as handled. * * TODO, WinRT: document SDL_HINT_WINRT_HANDLE_BACK_BUTTON need and use * For now, more details on why this is needed can be found at the * beginning of the following web page: * http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj247550(v=vs.105).aspx */ #define SDL_HINT_WINRT_HANDLE_BACK_BUTTON "SDL_HINT_WINRT_HANDLE_BACK_BUTTON" /** * \brief An enumeration of hint priorities */ typedef enum { SDL_HINT_DEFAULT, SDL_HINT_NORMAL, SDL_HINT_OVERRIDE } SDL_HintPriority; /** * \brief Set a hint with a specific priority * * The priority controls the behavior when setting a hint that already * has a value. Hints will replace existing hints of their priority and * lower. Environment variables are considered to have override priority. * * \return SDL_TRUE if the hint was set, SDL_FALSE otherwise */ extern DECLSPEC SDL_bool SDLCALL SDL_SetHintWithPriority(const char *name, const char *value, SDL_HintPriority priority); /** * \brief Set a hint with normal priority * * \return SDL_TRUE if the hint was set, SDL_FALSE otherwise */ extern DECLSPEC SDL_bool SDLCALL SDL_SetHint(const char *name, const char *value); /** * \brief Get a hint * * \return The string value of a hint variable. */ extern DECLSPEC const char * SDLCALL SDL_GetHint(const char *name); /** * \brief Add a function to watch a particular hint * * \param name The hint to watch * \param callback The function to call when the hint value changes * \param userdata A pointer to pass to the callback function */ typedef void (*SDL_HintCallback)(void *userdata, const char *name, const char *oldValue, const char *newValue); extern DECLSPEC void SDLCALL SDL_AddHintCallback(const char *name, SDL_HintCallback callback, void *userdata); /** * \brief Remove a function watching a particular hint * * \param name The hint being watched * \param callback The function being called when the hint value changes * \param userdata A pointer being passed to the callback function */ extern DECLSPEC void SDLCALL SDL_DelHintCallback(const char *name, SDL_HintCallback callback, void *userdata); /** * \brief Clear all hints * * This function is called during SDL_Quit() to free stored hints. */ extern DECLSPEC void SDLCALL SDL_ClearHints(void); /* Ends C function definitions when using C++ */ #ifdef __cplusplus } #endif #include "close_code.h" #endif /* _SDL_hints_h */ /* vi: set ts=4 sw=4 expandtab: */