README-porting.txt
changeset 7222 2435b221d77d
parent 6987 7084af936d82
equal deleted inserted replaced
7221:122c97a210bc 7222:2435b221d77d
       
     1 
       
     2 * Porting To A New Platform
       
     3 
       
     4   The first thing you have to do when porting to a new platform, is look at
       
     5 include/SDL_platform.h and create an entry there for your operating system.
       
     6 The standard format is __PLATFORM__, where PLATFORM is the name of the OS.
       
     7 Ideally SDL_platform.h will be able to auto-detect the system it's building
       
     8 on based on C preprocessor symbols.
       
     9 
       
    10 There are two basic ways of building SDL at the moment:
       
    11 
       
    12 1. The "UNIX" way:  ./configure; make; make install
       
    13 
       
    14    If you have a GNUish system, then you might try this.  Edit configure.in,
       
    15    take a look at the large section labelled:
       
    16 	"Set up the configuration based on the target platform!"
       
    17    Add a section for your platform, and then re-run autogen.sh and build!
       
    18 
       
    19 2. Using an IDE:
       
    20 
       
    21    If you're using an IDE or other non-configure build system, you'll probably
       
    22    want to create a custom SDL_config.h for your platform.  Edit SDL_config.h,
       
    23    add a section for your platform, and create a custom SDL_config_{platform}.h,
       
    24    based on SDL_config.h.minimal and SDL_config.h.in
       
    25 
       
    26    Add the top level include directory to the header search path, and then add
       
    27    the following sources to the project:
       
    28 	src/*.c
       
    29 	src/atomic/*.c
       
    30 	src/audio/*.c
       
    31 	src/cpuinfo/*.c
       
    32 	src/events/*.c
       
    33 	src/file/*.c
       
    34 	src/haptic/*.c
       
    35 	src/joystick/*.c
       
    36 	src/power/*.c
       
    37 	src/render/*.c
       
    38 	src/stdlib/*.c
       
    39 	src/thread/*.c
       
    40 	src/timer/*.c
       
    41 	src/video/*.c
       
    42 	src/audio/disk/*.c
       
    43 	src/audio/dummy/*.c
       
    44 	src/video/dummy/*.c
       
    45 	src/haptic/dummy/*.c
       
    46 	src/joystick/dummy/*.c
       
    47 	src/main/dummy/*.c
       
    48 	src/thread/generic/*.c
       
    49 	src/timer/dummy/*.c
       
    50 	src/loadso/dummy/*.c
       
    51 
       
    52 
       
    53 Once you have a working library without any drivers, you can go back to each
       
    54 of the major subsystems and start implementing drivers for your platform.
       
    55 
       
    56 If you have any questions, don't hesitate to ask on the SDL mailing list:
       
    57 	http://www.libsdl.org/mailing-list.php
       
    58 
       
    59 Enjoy!
       
    60 	Sam Lantinga				(slouken@libsdl.org)
       
    61