This repository has been archived by the owner on Feb 11, 2021. It is now read-only.
/
SDL_audio.c
1208 lines (1050 loc) · 34.6 KB
1
2
/*
SDL - Simple DirectMedia Layer
3
Copyright (C) 1997-2010 Sam Lantinga
4
5
This library is free software; you can redistribute it and/or
6
modify it under the terms of the GNU Lesser General Public
7
License as published by the Free Software Foundation; either
8
version 2.1 of the License, or (at your option) any later version.
9
10
11
12
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13
Lesser General Public License for more details.
15
16
17
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
18
19
Sam Lantinga
20
slouken@libsdl.org
21
*/
22
#include "SDL_config.h"
23
24
25
26
/* Allow access to a raw mixing buffer */
#include "SDL.h"
27
#include "SDL_audio.h"
28
29
30
31
#include "SDL_audio_c.h"
#include "SDL_audiomem.h"
#include "SDL_sysaudio.h"
32
#define _THIS SDL_AudioDevice *this
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
static SDL_AudioDriver current_audio;
static SDL_AudioDevice *open_devices[16];
/* !!! FIXME: These are wordy and unlocalized... */
#define DEFAULT_OUTPUT_DEVNAME "System audio output device"
#define DEFAULT_INPUT_DEVNAME "System audio capture device"
/*
* Not all of these will be compiled and linked in, but it's convenient
* to have a complete list here and saves yet-another block of #ifdefs...
* Please see bootstrap[], below, for the actual #ifdef mess.
*/
extern AudioBootStrap BSD_AUDIO_bootstrap;
extern AudioBootStrap DSP_bootstrap;
extern AudioBootStrap DMA_bootstrap;
extern AudioBootStrap ALSA_bootstrap;
51
extern AudioBootStrap PULSEAUDIO_bootstrap;
52
extern AudioBootStrap QSAAUDIO_bootstrap;
53
54
55
56
57
58
extern AudioBootStrap SUNAUDIO_bootstrap;
extern AudioBootStrap DMEDIA_bootstrap;
extern AudioBootStrap ARTS_bootstrap;
extern AudioBootStrap ESD_bootstrap;
extern AudioBootStrap NAS_bootstrap;
extern AudioBootStrap DSOUND_bootstrap;
59
extern AudioBootStrap WINWAVEOUT_bootstrap;
60
61
62
extern AudioBootStrap PAUDIO_bootstrap;
extern AudioBootStrap BEOSAUDIO_bootstrap;
extern AudioBootStrap COREAUDIO_bootstrap;
63
extern AudioBootStrap COREAUDIOIPHONE_bootstrap;
64
65
66
67
68
69
extern AudioBootStrap SNDMGR_bootstrap;
extern AudioBootStrap DISKAUD_bootstrap;
extern AudioBootStrap DUMMYAUD_bootstrap;
extern AudioBootStrap DCAUD_bootstrap;
extern AudioBootStrap MMEAUDIO_bootstrap;
extern AudioBootStrap DART_bootstrap;
70
extern AudioBootStrap NDSAUD_bootstrap;
71
extern AudioBootStrap FUSIONSOUND_bootstrap;
74
/* Available audio drivers */
75
static const AudioBootStrap *const bootstrap[] = {
76
#if SDL_AUDIO_DRIVER_BSD
77
&BSD_AUDIO_bootstrap,
79
80
#if SDL_AUDIO_DRIVER_PULSEAUDIO
&PULSEAUDIO_bootstrap,
81
#endif
82
#if SDL_AUDIO_DRIVER_ALSA
83
&ALSA_bootstrap,
84
#endif
85
86
87
#if SDL_AUDIO_DRIVER_OSS
&DSP_bootstrap,
&DMA_bootstrap,
89
90
#if SDL_AUDIO_DRIVER_QSA
&QSAAUDIO_bootstrap,
92
#if SDL_AUDIO_DRIVER_SUNAUDIO
93
&SUNAUDIO_bootstrap,
95
#if SDL_AUDIO_DRIVER_DMEDIA
96
&DMEDIA_bootstrap,
98
#if SDL_AUDIO_DRIVER_ARTS
99
&ARTS_bootstrap,
100
#endif
101
#if SDL_AUDIO_DRIVER_ESD
102
&ESD_bootstrap,
103
#endif
104
#if SDL_AUDIO_DRIVER_NAS
105
&NAS_bootstrap,
106
#endif
107
#if SDL_AUDIO_DRIVER_DSOUND
108
&DSOUND_bootstrap,
109
#endif
110
111
#if SDL_AUDIO_DRIVER_WINWAVEOUT
&WINWAVEOUT_bootstrap,
112
#endif
113
114
#if SDL_AUDIO_DRIVER_PAUDIO
&PAUDIO_bootstrap,
116
117
#if SDL_AUDIO_DRIVER_BEOSAUDIO
&BEOSAUDIO_bootstrap,
118
#endif
119
#if SDL_AUDIO_DRIVER_COREAUDIO
120
&COREAUDIO_bootstrap,
122
123
124
#if SDL_AUDIO_DRIVER_COREAUDIOIPHONE
&COREAUDIOIPHONE_bootstrap,
#endif
125
#if SDL_AUDIO_DRIVER_DISK
126
&DISKAUD_bootstrap,
128
#if SDL_AUDIO_DRIVER_DUMMY
129
&DUMMYAUD_bootstrap,
130
#endif
131
#if SDL_AUDIO_DRIVER_MMEAUDIO
132
&MMEAUDIO_bootstrap,
134
135
#if SDL_AUDIO_DRIVER_NDS
&NDSAUD_bootstrap,
136
137
138
#endif
#if SDL_AUDIO_DRIVER_FUSIONSOUND
&FUSIONSOUND_bootstrap,
141
142
};
143
144
static SDL_AudioDevice *
get_audio_device(SDL_AudioDeviceID id)
147
if ((id >= SDL_arraysize(open_devices)) || (open_devices[id] == NULL)) {
148
149
150
151
152
153
154
155
156
SDL_SetError("Invalid audio device ID");
return NULL;
}
return open_devices[id];
}
/* stubs for audio drivers that don't need a specific entry point... */
157
158
159
160
161
static int
SDL_AudioDetectDevices_Default(int iscapture)
{
return -1;
}
163
164
165
166
static void
SDL_AudioThreadInit_Default(_THIS)
{ /* no-op. */
}
168
169
170
171
static void
SDL_AudioWaitDevice_Default(_THIS)
{ /* no-op. */
}
173
174
175
176
static void
SDL_AudioPlayDevice_Default(_THIS)
{ /* no-op. */
}
178
179
180
181
182
static Uint8 *
SDL_AudioGetDeviceBuf_Default(_THIS)
{
return NULL;
}
184
185
186
187
static void
SDL_AudioWaitDone_Default(_THIS)
{ /* no-op. */
}
189
190
191
192
static void
SDL_AudioCloseDevice_Default(_THIS)
{ /* no-op. */
}
194
195
196
197
static void
SDL_AudioDeinitialize_Default(void)
{ /* no-op. */
}
198
199
200
201
202
203
204
static int
SDL_AudioOpenDevice_Default(_THIS, const char *devname, int iscapture)
{
return 0;
}
205
206
static const char *
SDL_AudioGetDeviceName_Default(int index, int iscapture)
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
{
SDL_SetError("No such device");
return NULL;
}
static void
SDL_AudioLockDevice_Default(SDL_AudioDevice * device)
{
if (device->thread && (SDL_ThreadID() == device->threadid)) {
return;
}
SDL_mutexP(device->mixer_lock);
}
static void
SDL_AudioUnlockDevice_Default(SDL_AudioDevice * device)
{
if (device->thread && (SDL_ThreadID() == device->threadid)) {
return;
}
SDL_mutexV(device->mixer_lock);
}
231
232
static void
finalize_audio_entry_points(void)
233
234
235
236
237
238
{
/*
* Fill in stub functions for unused driver entry points. This lets us
* blindly call them without having to check for validity first.
*/
239
#define FILL_STUB(x) \
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
if (current_audio.impl.x == NULL) { \
current_audio.impl.x = SDL_Audio##x##_Default; \
}
FILL_STUB(DetectDevices);
FILL_STUB(GetDeviceName);
FILL_STUB(OpenDevice);
FILL_STUB(ThreadInit);
FILL_STUB(WaitDevice);
FILL_STUB(PlayDevice);
FILL_STUB(GetDeviceBuf);
FILL_STUB(WaitDone);
FILL_STUB(CloseDevice);
FILL_STUB(LockDevice);
FILL_STUB(UnlockDevice);
FILL_STUB(Deinitialize);
255
#undef FILL_STUB
258
259
/* Streaming functions (for when the input and output buffer sizes are different) */
/* Write [length] bytes from buf into the streamer */
260
static void
261
262
263
264
265
266
267
268
269
270
271
SDL_StreamWrite(SDL_AudioStreamer * stream, Uint8 * buf, int length)
{
int i;
for (i = 0; i < length; ++i) {
stream->buffer[stream->write_pos] = buf[i];
++stream->write_pos;
}
}
/* Read [length] bytes out of the streamer into buf */
272
static void
273
274
275
276
277
278
279
280
281
282
SDL_StreamRead(SDL_AudioStreamer * stream, Uint8 * buf, int length)
{
int i;
for (i = 0; i < length; ++i) {
buf[i] = stream->buffer[stream->read_pos];
++stream->read_pos;
}
}
283
static int
284
285
286
287
288
289
SDL_StreamLength(SDL_AudioStreamer * stream)
{
return (stream->write_pos - stream->read_pos) % stream->max_len;
}
/* Initialize the stream by allocating the buffer and setting the read/write heads to the beginning */
290
static int
291
292
293
SDL_StreamInit(SDL_AudioStreamer * stream, int max_len, Uint8 silence)
{
/* First try to allocate the buffer */
294
stream->buffer = (Uint8 *) SDL_malloc(max_len);
295
296
297
298
299
300
301
302
303
if (stream->buffer == NULL) {
return -1;
}
stream->max_len = max_len;
stream->read_pos = 0;
stream->write_pos = 0;
/* Zero out the buffer */
304
305
306
SDL_memset(stream->buffer, silence, max_len);
return 0;
307
308
309
}
/* Deinitialize the stream simply by freeing the buffer */
310
static void
311
312
313
SDL_StreamDeinit(SDL_AudioStreamer * stream)
{
if (stream->buffer != NULL) {
314
SDL_free(stream->buffer);
318
319
/* The general mixing thread function */
321
SDL_RunAudio(void *devicep)
322
{
323
SDL_AudioDevice *device = (SDL_AudioDevice *) devicep;
324
325
326
327
328
Uint8 *stream;
int stream_len;
void *udata;
void (SDLCALL * fill) (void *userdata, Uint8 * stream, int len);
int silence;
330
331
332
333
/* For streaming when the buffer sizes don't match up */
Uint8 *istream;
int istream_len;
335
/* Perform any thread setup */
336
337
device->threadid = SDL_ThreadID();
current_audio.impl.ThreadInit(device);
339
/* Set up the mixing function */
340
341
fill = device->spec.callback;
udata = device->spec.userdata;
343
344
345
/* By default do not stream */
device->use_streamer = 0;
346
347
if (device->convert.needed) {
if (device->convert.src_format == AUDIO_U8) {
348
349
350
351
silence = 0x80;
} else {
silence = 0;
}
353
#if 0 /* !!! FIXME: I took len_div out of the structure. Use rate_incr instead? */
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
/* If the result of the conversion alters the length, i.e. resampling is being used, use the streamer */
if (device->convert.len_mult != 1 || device->convert.len_div != 1) {
/* The streamer's maximum length should be twice whichever is larger: spec.size or len_cvt */
stream_max_len = 2 * device->spec.size;
if (device->convert.len_mult > device->convert.len_div) {
stream_max_len *= device->convert.len_mult;
stream_max_len /= device->convert.len_div;
}
if (SDL_StreamInit(&device->streamer, stream_max_len, silence) <
0)
return -1;
device->use_streamer = 1;
/* istream_len should be the length of what we grab from the callback and feed to conversion,
so that we get close to spec_size. I.e. we want device.spec_size = istream_len * u / d
*/
istream_len =
device->spec.size * device->convert.len_div /
device->convert.len_mult;
}
375
376
377
/* stream_len = device->convert.len; */
stream_len = device->spec.size;
379
380
silence = device->spec.silence;
stream_len = device->spec.size;
383
384
385
/* Calculate the delay while paused */
delay = ((device->spec.samples * 1000) / device->spec.freq);
386
387
/* Determine if the streamer is necessary here */
if (device->use_streamer == 1) {
388
/* This code is almost the same as the old code. The difference is, instead of reading
389
390
391
392
393
394
395
396
397
398
399
400
directly from the callback into "stream", then converting and sending the audio off,
we go: callback -> "istream" -> (conversion) -> streamer -> stream -> device.
However, reading and writing with streamer are done separately:
- We only call the callback and write to the streamer when the streamer does not
contain enough samples to output to the device.
- We only read from the streamer and tell the device to play when the streamer
does have enough samples to output.
This allows us to perform resampling in the conversion step, where the output of the
resampling process can be any number. We will have to see what a good size for the
stream's maximum length is, but I suspect 2*max(len_cvt, stream_len) is a good figure.
*/
while (device->enabled) {
401
402
403
404
405
406
if (device->paused) {
SDL_Delay(delay);
continue;
}
407
408
409
410
411
412
413
414
415
416
/* Only read in audio if the streamer doesn't have enough already (if it does not have enough samples to output) */
if (SDL_StreamLength(&device->streamer) < stream_len) {
/* Set up istream */
if (device->convert.needed) {
if (device->convert.buf) {
istream = device->convert.buf;
} else {
continue;
}
} else {
417
418
419
/* FIXME: Ryan, this is probably wrong. I imagine we don't want to get
* a device buffer both here and below in the stream output.
*/
420
421
422
423
424
425
426
istream = current_audio.impl.GetDeviceBuf(device);
if (istream == NULL) {
istream = device->fake_stream;
}
}
/* Read from the callback into the _input_ stream */
427
428
429
SDL_mutexP(device->mixer_lock);
(*fill) (udata, istream, istream_len);
SDL_mutexV(device->mixer_lock);
430
431
432
433
434
435
436
437
438
439
440
441
442
/* Convert the audio if necessary and write to the streamer */
if (device->convert.needed) {
SDL_ConvertAudio(&device->convert);
if (istream == NULL) {
istream = device->fake_stream;
}
/*SDL_memcpy(istream, device->convert.buf, device->convert.len_cvt); */
SDL_StreamWrite(&device->streamer, device->convert.buf,
device->convert.len_cvt);
} else {
SDL_StreamWrite(&device->streamer, istream, istream_len);
}
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
/* Only output audio if the streamer has enough to output */
if (SDL_StreamLength(&device->streamer) >= stream_len) {
/* Set up the output stream */
if (device->convert.needed) {
if (device->convert.buf) {
stream = device->convert.buf;
} else {
continue;
}
} else {
stream = current_audio.impl.GetDeviceBuf(device);
if (stream == NULL) {
stream = device->fake_stream;
}
}
/* Now read from the streamer */
SDL_StreamRead(&device->streamer, stream, stream_len);
/* Ready current buffer for play and change current buffer */
465
if (stream != device->fake_stream) {
466
current_audio.impl.PlayDevice(device);
467
/* Wait for an audio buffer to become available */
468
current_audio.impl.WaitDevice(device);
469
} else {
470
SDL_Delay(delay);
475
476
477
478
479
480
} else {
/* Otherwise, do not use the streamer. This is the old code. */
/* Loop, filling the audio buffers */
while (device->enabled) {
481
482
483
484
485
if (device->paused) {
SDL_Delay(delay);
continue;
}
486
487
488
489
490
491
492
493
494
495
496
497
498
/* Fill the current buffer with sound */
if (device->convert.needed) {
if (device->convert.buf) {
stream = device->convert.buf;
} else {
continue;
}
} else {
stream = current_audio.impl.GetDeviceBuf(device);
if (stream == NULL) {
stream = device->fake_stream;
}
}
500
501
502
SDL_mutexP(device->mixer_lock);
(*fill) (udata, stream, stream_len);
SDL_mutexV(device->mixer_lock);
504
505
506
507
508
509
510
511
512
513
/* Convert the audio if necessary */
if (device->convert.needed) {
SDL_ConvertAudio(&device->convert);
stream = current_audio.impl.GetDeviceBuf(device);
if (stream == NULL) {
stream = device->fake_stream;
}
SDL_memcpy(stream, device->convert.buf,
device->convert.len_cvt);
}
515
/* Ready current buffer for play and change current buffer */
516
if (stream != device->fake_stream) {
517
current_audio.impl.PlayDevice(device);
518
/* Wait for an audio buffer to become available */
519
current_audio.impl.WaitDevice(device);
520
} else {
521
SDL_Delay(delay);
523
524
525
526
}
}
/* Wait for the audio to drain.. */
527
current_audio.impl.WaitDone(device);
529
530
531
532
/* If necessary, deinit the streamer */
if (device->use_streamer == 1)
SDL_StreamDeinit(&device->streamer);
534
535
}
537
static SDL_AudioFormat
538
SDL_ParseAudioFormat(const char *string)
539
{
540
#define CHECK_FMT_STRING(x) if (SDL_strcmp(string, #x) == 0) return AUDIO_##x
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
CHECK_FMT_STRING(U8);
CHECK_FMT_STRING(S8);
CHECK_FMT_STRING(U16LSB);
CHECK_FMT_STRING(S16LSB);
CHECK_FMT_STRING(U16MSB);
CHECK_FMT_STRING(S16MSB);
CHECK_FMT_STRING(U16SYS);
CHECK_FMT_STRING(S16SYS);
CHECK_FMT_STRING(U16);
CHECK_FMT_STRING(S16);
CHECK_FMT_STRING(S32LSB);
CHECK_FMT_STRING(S32MSB);
CHECK_FMT_STRING(S32SYS);
CHECK_FMT_STRING(S32);
CHECK_FMT_STRING(F32LSB);
CHECK_FMT_STRING(F32MSB);
CHECK_FMT_STRING(F32SYS);
CHECK_FMT_STRING(F32);
559
#undef CHECK_FMT_STRING
561
562
}
563
564
int
SDL_GetNumAudioDrivers(void)
565
{
566
567
return (SDL_arraysize(bootstrap) - 1);
}
569
570
571
572
573
574
575
576
577
578
579
580
const char *
SDL_GetAudioDriver(int index)
{
if (index >= 0 && index < SDL_GetNumAudioDrivers()) {
return (bootstrap[index]->name);
}
return (NULL);
}
int
SDL_AudioInit(const char *driver_name)
{
581
582
583
int i = 0;
int initialized = 0;
int tried_to_init = 0;
585
if (SDL_WasInit(SDL_INIT_AUDIO)) {
586
SDL_AudioQuit(); /* shutdown driver if already running. */
589
590
SDL_memset(¤t_audio, '\0', sizeof(current_audio));
SDL_memset(open_devices, '\0', sizeof(open_devices));
592
/* Select the proper audio driver */
593
594
595
if (driver_name == NULL) {
driver_name = SDL_getenv("SDL_AUDIODRIVER");
}
596
597
598
599
for (i = 0; (!initialized) && (bootstrap[i]); ++i) {
/* make sure we should even try this driver before doing so... */
const AudioBootStrap *backend = bootstrap[i];
600
601
if (((driver_name) && (SDL_strcasecmp(backend->name, driver_name))) ||
((!driver_name) && (backend->demand_only))) {
604
605
tried_to_init = 1;
606
SDL_memset(¤t_audio, 0, sizeof(current_audio));
607
608
current_audio.name = backend->name;
current_audio.desc = backend->desc;
609
initialized = backend->init(¤t_audio.impl);
611
612
613
614
if (!initialized) {
/* specific drivers will set the error message if they fail... */
if (!tried_to_init) {
615
if (driver_name) {
616
SDL_SetError("Audio target '%s' not available", driver_name);
617
618
619
620
} else {
SDL_SetError("No available audio device");
}
}
622
623
SDL_memset(¤t_audio, 0, sizeof(current_audio));
return (-1); /* No driver was available, so fail. */
625
626
627
finalize_audio_entry_points();
629
630
}
631
632
633
634
635
/*
* Get the current audio driver name
*/
const char *
SDL_GetCurrentAudioDriver()
636
{
637
return current_audio.name;
638
639
}
642
SDL_GetNumAudioDevices(int iscapture)
643
{
644
645
646
647
648
649
if (!SDL_WasInit(SDL_INIT_AUDIO)) {
return -1;
}
if ((iscapture) && (!current_audio.impl.HasCaptureSupport)) {
return 0;
}
651
652
if ((iscapture) && (current_audio.impl.OnlyHasDefaultInputDevice)) {
return 1;
655
656
if ((!iscapture) && (current_audio.impl.OnlyHasDefaultOutputDevice)) {
return 1;
659
660
661
662
663
664
665
666
667
668
return current_audio.impl.DetectDevices(iscapture);
}
const char *
SDL_GetAudioDeviceName(int index, int iscapture)
{
if (!SDL_WasInit(SDL_INIT_AUDIO)) {
SDL_SetError("Audio subsystem is not initialized");
return NULL;
670
671
672
673
if ((iscapture) && (!current_audio.impl.HasCaptureSupport)) {
SDL_SetError("No capture support");
return NULL;
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
if (index < 0) {
SDL_SetError("No such device");
return NULL;
}
if ((iscapture) && (current_audio.impl.OnlyHasDefaultInputDevice)) {
return DEFAULT_INPUT_DEVNAME;
}
if ((!iscapture) && (current_audio.impl.OnlyHasDefaultOutputDevice)) {
return DEFAULT_OUTPUT_DEVNAME;
}
return current_audio.impl.GetDeviceName(index, iscapture);
}
static void
694
close_audio_device(SDL_AudioDevice * device)
695
696
697
698
699
700
701
{
device->enabled = 0;
if (device->thread != NULL) {
SDL_WaitThread(device->thread, NULL);
}
if (device->mixer_lock != NULL) {
SDL_DestroyMutex(device->mixer_lock);
703
704
if (device->fake_stream != NULL) {
SDL_FreeAudioMem(device->fake_stream);
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
if (device->convert.needed) {
SDL_FreeAudioMem(device->convert.buf);
}
if (device->opened) {
current_audio.impl.CloseDevice(device);
device->opened = 0;
}
SDL_FreeAudioMem(device);
}
/*
* Sanity check desired AudioSpec for SDL_OpenAudio() in (orig).
* Fills in a sanitized copy in (prepared).
* Returns non-zero if okay, zero on fatal parameters in (orig).
*/
static int
723
prepare_audiospec(const SDL_AudioSpec * orig, SDL_AudioSpec * prepared)
725
SDL_memcpy(prepared, orig, sizeof(SDL_AudioSpec));
726
727
728
729
730
731
732
733
if (orig->callback == NULL) {
SDL_SetError("SDL_OpenAudio() passed a NULL callback");
return 0;
}
if (orig->freq == 0) {
const char *env = SDL_getenv("SDL_AUDIO_FREQUENCY");
734
735
if ((!env) || ((prepared->freq = SDL_atoi(env)) == 0)) {
prepared->freq = 22050; /* a reasonable default */
738
739
740
741
if (orig->format == 0) {
const char *env = SDL_getenv("SDL_AUDIO_FORMAT");
if ((!env) || ((prepared->format = SDL_ParseAudioFormat(env)) == 0)) {
742
prepared->format = AUDIO_S16; /* a reasonable default */
743
744
745
746
}
}
switch (orig->channels) {
747
748
case 0:{
const char *env = SDL_getenv("SDL_AUDIO_CHANNELS");
749
if ((!env) || ((prepared->channels = (Uint8) SDL_atoi(env)) == 0)) {
750
751
752
prepared->channels = 2; /* a reasonable default */
}
break;
754
755
756
757
758
759
case 1: /* Mono */
case 2: /* Stereo */
case 4: /* surround */
case 6: /* surround with center and lfe */
break;
default:
760
761
SDL_SetError("Unsupported number of audio channels.");
return 0;
763
764
765
if (orig->samples == 0) {
const char *env = SDL_getenv("SDL_AUDIO_SAMPLES");
766
if ((!env) || ((prepared->samples = (Uint16) SDL_atoi(env)) == 0)) {
767
768
769
770
771
772
773
774
/* Pick a default of ~46 ms at desired frequency */
/* !!! FIXME: remove this when the non-Po2 resampling is in. */
const int samples = (prepared->freq / 1000) * 46;
int power2 = 1;
while (power2 < samples) {
power2 *= 2;
}
prepared->samples = power2;
777
778
779
780
781
782
783
784
785
786
/* Calculate the silence and size of the audio specification */
SDL_CalculateAudioSpec(prepared);
return 1;
}
static SDL_AudioDeviceID
open_audio_device(const char *devname, int iscapture,
787
788
const SDL_AudioSpec * desired, SDL_AudioSpec * obtained,
int allowed_changes, int min_id)
789
790
{
SDL_AudioDeviceID id = 0;
791
SDL_AudioSpec _obtained;
792
SDL_AudioDevice *device;
793
SDL_bool build_cvt;
794
795
796
797
798
int i = 0;
if (!SDL_WasInit(SDL_INIT_AUDIO)) {
SDL_SetError("Audio subsystem is not initialized");
return 0;
800
801
802
803
if ((iscapture) && (!current_audio.impl.HasCaptureSupport)) {
SDL_SetError("No capture support");
return 0;
806
807
808
809
if (!obtained) {
obtained = &_obtained;
}
if (!prepare_audiospec(desired, obtained)) {
810
811
return 0;
}
813
814
815
816
/* If app doesn't care about a specific device, let the user override. */
if (devname == NULL) {
devname = SDL_getenv("SDL_AUDIO_DEVICE_NAME");
}
818
819
820
821
822
823
824
825
826
/*
* Catch device names at the high level for the simple case...
* This lets us have a basic "device enumeration" for systems that
* don't have multiple devices, but makes sure the device name is
* always NULL when it hits the low level.
*
* Also make sure that the simple case prevents multiple simultaneous
* opens of the default system device.
*/
828
829
830
831
832
833
if ((iscapture) && (current_audio.impl.OnlyHasDefaultInputDevice)) {
if ((devname) && (SDL_strcmp(devname, DEFAULT_INPUT_DEVNAME) != 0)) {
SDL_SetError("No such device");
return 0;
}
devname = NULL;
835
836
837
838
839
840
for (i = 0; i < SDL_arraysize(open_devices); i++) {
if ((open_devices[i]) && (open_devices[i]->iscapture)) {
SDL_SetError("Audio device already open");
return 0;
}
}
843
844
845
846
847
848
if ((!iscapture) && (current_audio.impl.OnlyHasDefaultOutputDevice)) {
if ((devname) && (SDL_strcmp(devname, DEFAULT_OUTPUT_DEVNAME) != 0)) {
SDL_SetError("No such device");
return 0;
}
devname = NULL;
850
851
852
853
854
855
856
for (i = 0; i < SDL_arraysize(open_devices); i++) {
if ((open_devices[i]) && (!open_devices[i]->iscapture)) {
SDL_SetError("Audio device already open");
return 0;
}
}
}
858
device = (SDL_AudioDevice *) SDL_AllocAudioMem(sizeof(SDL_AudioDevice));
859
860
861
if (device == NULL) {
SDL_OutOfMemory();
return 0;
863
SDL_memset(device, '\0', sizeof(SDL_AudioDevice));
864
device->spec = *obtained;
865
866
867
device->enabled = 1;
device->paused = 1;
device->iscapture = iscapture;
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
/* Create a semaphore for locking the sound buffers */
if (!current_audio.impl.SkipMixerLock) {
device->mixer_lock = SDL_CreateMutex();
if (device->mixer_lock == NULL) {
close_audio_device(device);
SDL_SetError("Couldn't create mixer lock");
return 0;
}
}
if (!current_audio.impl.OpenDevice(device, devname, iscapture)) {
close_audio_device(device);
return 0;
}
device->opened = 1;
884
885
/* Allocate a fake audio memory buffer */
886
887
888
device->fake_stream = SDL_AllocAudioMem(device->spec.size);
if (device->fake_stream == NULL) {
close_audio_device(device);
889
SDL_OutOfMemory();
893
894
895
896
897
898
/* If the audio driver changes the buffer size, accept it */
if (device->spec.samples != obtained->samples) {
obtained->samples = device->spec.samples;
SDL_CalculateAudioSpec(obtained);
}
899
/* See if we need to do any conversion */
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
build_cvt = SDL_FALSE;
if (obtained->freq != device->spec.freq) {
if (allowed_changes & SDL_AUDIO_ALLOW_FREQUENCY_CHANGE) {
obtained->freq = device->spec.freq;
} else {
build_cvt = SDL_TRUE;
}
}
if (obtained->format != device->spec.format) {
if (allowed_changes & SDL_AUDIO_ALLOW_FORMAT_CHANGE) {
obtained->format = device->spec.format;
} else {
build_cvt = SDL_TRUE;
}
}
if (obtained->channels != device->spec.channels) {
if (allowed_changes & SDL_AUDIO_ALLOW_CHANNELS_CHANGE) {
obtained->channels = device->spec.channels;
} else {
build_cvt = SDL_TRUE;
}
}
if (build_cvt) {
923
/* Build an audio conversion block */
924
if (SDL_BuildAudioCVT(&device->convert,
925
926
obtained->format, obtained->channels,
obtained->freq,
927
928
929
930
device->spec.format, device->spec.channels,
device->spec.freq) < 0) {
close_audio_device(device);
return 0;
932
if (device->convert.needed) {
933
device->convert.len = (int) (((double) obtained->size) /
934
device->convert.len_ratio);
936
937
938
939
940
device->convert.buf =
(Uint8 *) SDL_AllocAudioMem(device->convert.len *
device->convert.len_mult);
if (device->convert.buf == NULL) {
close_audio_device(device);
941
SDL_OutOfMemory();
946
947
/* Find an available device ID and store the structure... */
948
for (id = min_id - 1; id < SDL_arraysize(open_devices); id++) {
949
950
951
952
953
954
955
956
957
958
959
960
if (open_devices[id] == NULL) {
open_devices[id] = device;
break;
}
}
if (id == SDL_arraysize(open_devices)) {
SDL_SetError("Too many open audio devices");
close_audio_device(device);
return 0;
}
961
/* Start the audio thread if necessary */
962
if (!current_audio.impl.ProvidesOwnCallbackThread) {
963
/* Start the audio thread */
964
/* !!! FIXME: this is nasty. */
965
#if (defined(__WIN32__) && !defined(_WIN32_WCE)) && !defined(HAVE_LIBC)
966
#undef SDL_CreateThread
967
device->thread = SDL_CreateThread(SDL_RunAudio, device, NULL, NULL);
969
device->thread = SDL_CreateThread(SDL_RunAudio, device);
971
if (device->thread == NULL) {
972
SDL_CloseAudioDevice(id + 1);
973
SDL_SetError("Couldn't create audio thread");
974
975
976
977
return 0;
}
}
978
return id + 1;
983
SDL_OpenAudio(SDL_AudioSpec * desired, SDL_AudioSpec * obtained)
984
985
986
987
988
989
{
SDL_AudioDeviceID id = 0;
/* Start up the audio driver, if necessary. This is legacy behaviour! */
if (!SDL_WasInit(SDL_INIT_AUDIO)) {
if (SDL_InitSubSystem(SDL_INIT_AUDIO) < 0) {
990
991
return (-1);
}
994
995
996
997
/* SDL_OpenAudio() is legacy and can only act on Device ID #1. */
if (open_devices[0] != NULL) {
SDL_SetError("Audio device is already opened");
return (-1);
1000
if (obtained) {