This repository has been archived by the owner on Feb 11, 2021. It is now read-only.
/
SDL_audio.c
1236 lines (1079 loc) · 35.6 KB
1
2
/*
SDL - Simple DirectMedia Layer
3
Copyright (C) 1997-2009 Sam Lantinga
4
5
This library is free software; you can redistribute it and/or
6
modify it under the terms of the GNU Lesser General Public
7
License as published by the Free Software Foundation; either
8
version 2.1 of the License, or (at your option) any later version.
9
10
11
12
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13
Lesser General Public License for more details.
14
15
16
17
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
18
19
Sam Lantinga
20
slouken@libsdl.org
21
*/
22
#include "SDL_config.h"
23
24
25
26
27
28
29
30
/* Allow access to a raw mixing buffer */
#include "SDL.h"
#include "SDL_audio_c.h"
#include "SDL_audiomem.h"
#include "SDL_sysaudio.h"
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
#define _THIS SDL_AudioDevice *this
static SDL_AudioDriver current_audio;
static SDL_AudioDevice *open_devices[16];
/* !!! FIXME: These are wordy and unlocalized... */
#define DEFAULT_OUTPUT_DEVNAME "System audio output device"
#define DEFAULT_INPUT_DEVNAME "System audio capture device"
/*
* Not all of these will be compiled and linked in, but it's convenient
* to have a complete list here and saves yet-another block of #ifdefs...
* Please see bootstrap[], below, for the actual #ifdef mess.
*/
extern AudioBootStrap BSD_AUDIO_bootstrap;
extern AudioBootStrap DSP_bootstrap;
extern AudioBootStrap DMA_bootstrap;
extern AudioBootStrap ALSA_bootstrap;
50
extern AudioBootStrap PULSEAUDIO_bootstrap;
51
52
53
54
55
56
57
extern AudioBootStrap QNXNTOAUDIO_bootstrap;
extern AudioBootStrap SUNAUDIO_bootstrap;
extern AudioBootStrap DMEDIA_bootstrap;
extern AudioBootStrap ARTS_bootstrap;
extern AudioBootStrap ESD_bootstrap;
extern AudioBootStrap NAS_bootstrap;
extern AudioBootStrap DSOUND_bootstrap;
58
extern AudioBootStrap WINWAVEOUT_bootstrap;
59
60
61
extern AudioBootStrap PAUDIO_bootstrap;
extern AudioBootStrap BEOSAUDIO_bootstrap;
extern AudioBootStrap COREAUDIO_bootstrap;
62
extern AudioBootStrap COREAUDIOIPHONE_bootstrap;
63
64
65
66
67
68
69
70
71
72
73
extern AudioBootStrap SNDMGR_bootstrap;
extern AudioBootStrap MINTAUDIO_GSXB_bootstrap;
extern AudioBootStrap MINTAUDIO_MCSN_bootstrap;
extern AudioBootStrap MINTAUDIO_STFA_bootstrap;
extern AudioBootStrap MINTAUDIO_XBIOS_bootstrap;
extern AudioBootStrap MINTAUDIO_DMA8_bootstrap;
extern AudioBootStrap DISKAUD_bootstrap;
extern AudioBootStrap DUMMYAUD_bootstrap;
extern AudioBootStrap DCAUD_bootstrap;
extern AudioBootStrap MMEAUDIO_bootstrap;
extern AudioBootStrap DART_bootstrap;
74
extern AudioBootStrap NDSAUD_bootstrap;
75
76
77
78
/* Available audio drivers */
static AudioBootStrap *bootstrap[] = {
79
#if SDL_AUDIO_DRIVER_BSD
80
&BSD_AUDIO_bootstrap,
81
#endif
82
83
#if SDL_AUDIO_DRIVER_PULSEAUDIO
&PULSEAUDIO_bootstrap,
84
#endif
85
#if SDL_AUDIO_DRIVER_ALSA
86
&ALSA_bootstrap,
87
#endif
88
89
90
#if SDL_AUDIO_DRIVER_OSS
&DSP_bootstrap,
&DMA_bootstrap,
91
#endif
92
#if SDL_AUDIO_DRIVER_QNXNTO
93
&QNXNTOAUDIO_bootstrap,
94
#endif
95
#if SDL_AUDIO_DRIVER_SUNAUDIO
96
&SUNAUDIO_bootstrap,
97
#endif
98
#if SDL_AUDIO_DRIVER_DMEDIA
99
&DMEDIA_bootstrap,
100
#endif
101
#if SDL_AUDIO_DRIVER_ARTS
102
&ARTS_bootstrap,
103
#endif
104
#if SDL_AUDIO_DRIVER_ESD
105
&ESD_bootstrap,
106
#endif
107
#if SDL_AUDIO_DRIVER_NAS
108
&NAS_bootstrap,
109
#endif
110
#if SDL_AUDIO_DRIVER_DSOUND
111
&DSOUND_bootstrap,
112
#endif
113
114
#if SDL_AUDIO_DRIVER_WINWAVEOUT
&WINWAVEOUT_bootstrap,
115
#endif
116
117
#if SDL_AUDIO_DRIVER_PAUDIO
&PAUDIO_bootstrap,
118
#endif
119
120
#if SDL_AUDIO_DRIVER_BEOSAUDIO
&BEOSAUDIO_bootstrap,
121
#endif
122
#if SDL_AUDIO_DRIVER_COREAUDIO
123
&COREAUDIO_bootstrap,
124
#endif
125
126
127
#if SDL_AUDIO_DRIVER_COREAUDIOIPHONE
&COREAUDIOIPHONE_bootstrap,
#endif
128
#if SDL_AUDIO_DRIVER_SNDMGR
129
&SNDMGR_bootstrap,
130
#endif
131
#if SDL_AUDIO_DRIVER_MINT
132
133
134
135
136
&MINTAUDIO_GSXB_bootstrap,
&MINTAUDIO_MCSN_bootstrap,
&MINTAUDIO_STFA_bootstrap,
&MINTAUDIO_XBIOS_bootstrap,
&MINTAUDIO_DMA8_bootstrap,
137
#endif
138
#if SDL_AUDIO_DRIVER_DISK
139
&DISKAUD_bootstrap,
140
#endif
141
#if SDL_AUDIO_DRIVER_DUMMY
142
&DUMMYAUD_bootstrap,
143
#endif
144
#if SDL_AUDIO_DRIVER_DC
145
&DCAUD_bootstrap,
146
#endif
147
#if SDL_AUDIO_DRIVER_MMEAUDIO
148
&MMEAUDIO_bootstrap,
149
150
#endif
#if SDL_AUDIO_DRIVER_DART
151
&DART_bootstrap,
152
153
154
#endif
#if SDL_AUDIO_DRIVER_NDS
&NDSAUD_bootstrap,
155
#endif
156
NULL
157
158
};
159
160
static SDL_AudioDevice *
get_audio_device(SDL_AudioDeviceID id)
161
162
{
id--;
163
if ((id >= SDL_arraysize(open_devices)) || (open_devices[id] == NULL)) {
164
165
166
167
168
169
170
171
172
SDL_SetError("Invalid audio device ID");
return NULL;
}
return open_devices[id];
}
/* stubs for audio drivers that don't need a specific entry point... */
173
174
175
176
177
static int
SDL_AudioDetectDevices_Default(int iscapture)
{
return -1;
}
178
179
180
181
182
static void
SDL_AudioThreadInit_Default(_THIS)
{ /* no-op. */
}
183
184
185
186
187
static void
SDL_AudioWaitDevice_Default(_THIS)
{ /* no-op. */
}
188
189
190
191
192
static void
SDL_AudioPlayDevice_Default(_THIS)
{ /* no-op. */
}
193
194
195
196
197
198
static Uint8 *
SDL_AudioGetDeviceBuf_Default(_THIS)
{
return NULL;
}
199
200
201
202
203
static void
SDL_AudioWaitDone_Default(_THIS)
{ /* no-op. */
}
204
205
206
207
208
static void
SDL_AudioCloseDevice_Default(_THIS)
{ /* no-op. */
}
209
210
211
212
213
static void
SDL_AudioDeinitialize_Default(void)
{ /* no-op. */
}
214
215
216
217
218
219
220
static int
SDL_AudioOpenDevice_Default(_THIS, const char *devname, int iscapture)
{
return 0;
}
221
222
static const char *
SDL_AudioGetDeviceName_Default(int index, int iscapture)
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
{
SDL_SetError("No such device");
return NULL;
}
static void
SDL_AudioLockDevice_Default(SDL_AudioDevice * device)
{
if (device->thread && (SDL_ThreadID() == device->threadid)) {
return;
}
SDL_mutexP(device->mixer_lock);
}
static void
SDL_AudioUnlockDevice_Default(SDL_AudioDevice * device)
{
if (device->thread && (SDL_ThreadID() == device->threadid)) {
return;
}
SDL_mutexV(device->mixer_lock);
}
247
248
static void
finalize_audio_entry_points(void)
249
250
251
252
253
254
{
/*
* Fill in stub functions for unused driver entry points. This lets us
* blindly call them without having to check for validity first.
*/
255
#define FILL_STUB(x) \
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
if (current_audio.impl.x == NULL) { \
current_audio.impl.x = SDL_Audio##x##_Default; \
}
FILL_STUB(DetectDevices);
FILL_STUB(GetDeviceName);
FILL_STUB(OpenDevice);
FILL_STUB(ThreadInit);
FILL_STUB(WaitDevice);
FILL_STUB(PlayDevice);
FILL_STUB(GetDeviceBuf);
FILL_STUB(WaitDone);
FILL_STUB(CloseDevice);
FILL_STUB(LockDevice);
FILL_STUB(UnlockDevice);
FILL_STUB(Deinitialize);
271
#undef FILL_STUB
272
}
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
/* Streaming functions (for when the input and output buffer sizes are different) */
/* Write [length] bytes from buf into the streamer */
void
SDL_StreamWrite(SDL_AudioStreamer * stream, Uint8 * buf, int length)
{
int i;
for (i = 0; i < length; ++i) {
stream->buffer[stream->write_pos] = buf[i];
++stream->write_pos;
}
}
/* Read [length] bytes out of the streamer into buf */
void
SDL_StreamRead(SDL_AudioStreamer * stream, Uint8 * buf, int length)
{
int i;
for (i = 0; i < length; ++i) {
buf[i] = stream->buffer[stream->read_pos];
++stream->read_pos;
}
}
int
SDL_StreamLength(SDL_AudioStreamer * stream)
{
return (stream->write_pos - stream->read_pos) % stream->max_len;
}
/* Initialize the stream by allocating the buffer and setting the read/write heads to the beginning */
int
SDL_StreamInit(SDL_AudioStreamer * stream, int max_len, Uint8 silence)
{
/* First try to allocate the buffer */
310
stream->buffer = (Uint8 *) SDL_malloc(max_len);
311
312
313
314
315
316
317
318
319
if (stream->buffer == NULL) {
return -1;
}
stream->max_len = max_len;
stream->read_pos = 0;
stream->write_pos = 0;
/* Zero out the buffer */
320
321
322
SDL_memset(stream->buffer, silence, max_len);
return 0;
323
324
325
326
327
328
329
}
/* Deinitialize the stream simply by freeing the buffer */
void
SDL_StreamDeinit(SDL_AudioStreamer * stream)
{
if (stream->buffer != NULL) {
330
SDL_free(stream->buffer);
331
332
333
}
}
334
335
/* The general mixing thread function */
336
int SDLCALL
337
SDL_RunAudio(void *devicep)
338
{
339
SDL_AudioDevice *device = (SDL_AudioDevice *) devicep;
340
341
342
343
344
Uint8 *stream;
int stream_len;
void *udata;
void (SDLCALL * fill) (void *userdata, Uint8 * stream, int len);
int silence;
345
346
347
348
349
int stream_max_len;
/* For streaming when the buffer sizes don't match up */
Uint8 *istream;
int istream_len;
350
351
/* Perform any thread setup */
352
353
device->threadid = SDL_ThreadID();
current_audio.impl.ThreadInit(device);
354
355
/* Set up the mixing function */
356
357
fill = device->spec.callback;
udata = device->spec.userdata;
358
359
360
361
/* By default do not stream */
device->use_streamer = 0;
362
363
if (device->convert.needed) {
if (device->convert.src_format == AUDIO_U8) {
364
365
366
367
silence = 0x80;
} else {
silence = 0;
}
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
/* If the result of the conversion alters the length, i.e. resampling is being used, use the streamer */
if (device->convert.len_mult != 1 || device->convert.len_div != 1) {
/* The streamer's maximum length should be twice whichever is larger: spec.size or len_cvt */
stream_max_len = 2 * device->spec.size;
if (device->convert.len_mult > device->convert.len_div) {
stream_max_len *= device->convert.len_mult;
stream_max_len /= device->convert.len_div;
}
if (SDL_StreamInit(&device->streamer, stream_max_len, silence) <
0)
return -1;
device->use_streamer = 1;
/* istream_len should be the length of what we grab from the callback and feed to conversion,
so that we get close to spec_size. I.e. we want device.spec_size = istream_len * u / d
*/
istream_len =
device->spec.size * device->convert.len_div /
device->convert.len_mult;
}
/* stream_len = device->convert.len; */
stream_len = device->spec.size;
392
} else {
393
394
silence = device->spec.silence;
stream_len = device->spec.size;
395
}
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
/* Determine if the streamer is necessary here */
if (device->use_streamer == 1) {
/* This code is almost the same as the old code. The difference is, instead of reding
directly from the callback into "stream", then converting and sending the audio off,
we go: callback -> "istream" -> (conversion) -> streamer -> stream -> device.
However, reading and writing with streamer are done separately:
- We only call the callback and write to the streamer when the streamer does not
contain enough samples to output to the device.
- We only read from the streamer and tell the device to play when the streamer
does have enough samples to output.
This allows us to perform resampling in the conversion step, where the output of the
resampling process can be any number. We will have to see what a good size for the
stream's maximum length is, but I suspect 2*max(len_cvt, stream_len) is a good figure.
*/
while (device->enabled) {
/* Only read in audio if the streamer doesn't have enough already (if it does not have enough samples to output) */
if (SDL_StreamLength(&device->streamer) < stream_len) {
/* Set up istream */
if (device->convert.needed) {
if (device->convert.buf) {
istream = device->convert.buf;
} else {
continue;
}
} else {
istream = current_audio.impl.GetDeviceBuf(device);
if (istream == NULL) {
istream = device->fake_stream;
}
}
/* Read from the callback into the _input_ stream */
if (!device->paused) {
SDL_mutexP(device->mixer_lock);
(*fill) (udata, istream, istream_len);
SDL_mutexV(device->mixer_lock);
}
/* Convert the audio if necessary and write to the streamer */
if (device->convert.needed) {
SDL_ConvertAudio(&device->convert);
if (istream == NULL) {
istream = device->fake_stream;
}
/*SDL_memcpy(istream, device->convert.buf, device->convert.len_cvt); */
SDL_StreamWrite(&device->streamer, device->convert.buf,
device->convert.len_cvt);
} else {
SDL_StreamWrite(&device->streamer, istream, istream_len);
}
447
}
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
/* Only output audio if the streamer has enough to output */
if (SDL_StreamLength(&device->streamer) >= stream_len) {
/* Set up the output stream */
if (device->convert.needed) {
if (device->convert.buf) {
stream = device->convert.buf;
} else {
continue;
}
} else {
stream = current_audio.impl.GetDeviceBuf(device);
if (stream == NULL) {
stream = device->fake_stream;
}
}
/* Now read from the streamer */
SDL_StreamRead(&device->streamer, stream, stream_len);
/* Ready current buffer for play and change current buffer */
if (stream != device->fake_stream) {
current_audio.impl.PlayDevice(device);
}
/* Wait for an audio buffer to become available */
if (stream == device->fake_stream) {
SDL_Delay((device->spec.samples * 1000) /
device->spec.freq);
} else {
current_audio.impl.WaitDevice(device);
}
480
}
481
482
}
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
} else {
/* Otherwise, do not use the streamer. This is the old code. */
/* Loop, filling the audio buffers */
while (device->enabled) {
/* Fill the current buffer with sound */
if (device->convert.needed) {
if (device->convert.buf) {
stream = device->convert.buf;
} else {
continue;
}
} else {
stream = current_audio.impl.GetDeviceBuf(device);
if (stream == NULL) {
stream = device->fake_stream;
}
}
502
503
504
505
506
if (!device->paused) {
SDL_mutexP(device->mixer_lock);
(*fill) (udata, stream, stream_len);
SDL_mutexV(device->mixer_lock);
507
508
}
509
510
511
512
513
514
515
516
517
518
/* Convert the audio if necessary */
if (device->convert.needed) {
SDL_ConvertAudio(&device->convert);
stream = current_audio.impl.GetDeviceBuf(device);
if (stream == NULL) {
stream = device->fake_stream;
}
SDL_memcpy(stream, device->convert.buf,
device->convert.len_cvt);
}
519
520
521
522
523
524
525
526
527
528
529
530
/* Ready current buffer for play and change current buffer */
if (stream != device->fake_stream) {
current_audio.impl.PlayDevice(device);
}
/* Wait for an audio buffer to become available */
if (stream == device->fake_stream) {
SDL_Delay((device->spec.samples * 1000) / device->spec.freq);
} else {
current_audio.impl.WaitDevice(device);
}
531
532
533
534
}
}
/* Wait for the audio to drain.. */
535
current_audio.impl.WaitDone(device);
536
537
538
539
540
/* If necessary, deinit the streamer */
if (device->use_streamer == 1)
SDL_StreamDeinit(&device->streamer);
541
return (0);
542
543
}
544
545
static SDL_AudioFormat
546
SDL_ParseAudioFormat(const char *string)
547
{
548
#define CHECK_FMT_STRING(x) if (SDL_strcmp(string, #x) == 0) return AUDIO_##x
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
CHECK_FMT_STRING(U8);
CHECK_FMT_STRING(S8);
CHECK_FMT_STRING(U16LSB);
CHECK_FMT_STRING(S16LSB);
CHECK_FMT_STRING(U16MSB);
CHECK_FMT_STRING(S16MSB);
CHECK_FMT_STRING(U16SYS);
CHECK_FMT_STRING(S16SYS);
CHECK_FMT_STRING(U16);
CHECK_FMT_STRING(S16);
CHECK_FMT_STRING(S32LSB);
CHECK_FMT_STRING(S32MSB);
CHECK_FMT_STRING(S32SYS);
CHECK_FMT_STRING(S32);
CHECK_FMT_STRING(F32LSB);
CHECK_FMT_STRING(F32MSB);
CHECK_FMT_STRING(F32SYS);
CHECK_FMT_STRING(F32);
567
#undef CHECK_FMT_STRING
568
return 0;
569
570
}
571
572
int
SDL_GetNumAudioDrivers(void)
573
{
574
575
return (SDL_arraysize(bootstrap) - 1);
}
576
577
578
579
580
581
582
583
584
585
586
587
588
const char *
SDL_GetAudioDriver(int index)
{
if (index >= 0 && index < SDL_GetNumAudioDrivers()) {
return (bootstrap[index]->name);
}
return (NULL);
}
int
SDL_AudioInit(const char *driver_name)
{
589
590
591
int i = 0;
int initialized = 0;
int tried_to_init = 0;
592
593
int rc = 0;
int best_choice = -1;
594
595
if (SDL_WasInit(SDL_INIT_AUDIO)) {
596
SDL_AudioQuit(); /* shutdown driver if already running. */
597
598
}
599
600
SDL_memset(¤t_audio, '\0', sizeof(current_audio));
SDL_memset(open_devices, '\0', sizeof(open_devices));
601
602
/* Select the proper audio driver */
603
604
605
if (driver_name == NULL) {
driver_name = SDL_getenv("SDL_AUDIODRIVER");
}
606
607
608
609
for (i = 0; (!initialized) && (bootstrap[i]); ++i) {
/* make sure we should even try this driver before doing so... */
const AudioBootStrap *backend = bootstrap[i];
610
611
if (((driver_name) && (SDL_strcasecmp(backend->name, driver_name))) ||
((!driver_name) && (backend->demand_only))) {
612
continue;
613
}
614
615
tried_to_init = 1;
616
SDL_memset(¤t_audio, 0, sizeof(current_audio));
617
618
current_audio.name = backend->name;
current_audio.desc = backend->desc;
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
rc = backend->init(¤t_audio.impl);
if (rc == 2) { /* init'd, and devices available. Take it! */
initialized = 1;
best_choice = i;
} else if (rc == 1) { /* init'd, but can't see any devices. */
current_audio.impl.Deinitialize();
if (best_choice == -1) {
best_choice = i;
}
}
}
/* No definite choice. Pick one that works but can't promise a device. */
if ((!initialized) && (best_choice != -1)) {
const AudioBootStrap *backend = bootstrap[best_choice];
SDL_memset(¤t_audio, 0, sizeof(current_audio));
current_audio.name = backend->name;
current_audio.desc = backend->desc;
initialized = (backend->init(¤t_audio.impl) > 0);
638
}
639
640
641
642
if (!initialized) {
/* specific drivers will set the error message if they fail... */
if (!tried_to_init) {
643
644
645
646
647
648
if (driver_name) {
SDL_SetError("%s not available", driver_name);
} else {
SDL_SetError("No available audio device");
}
}
649
650
651
SDL_memset(¤t_audio, 0, sizeof(current_audio));
return (-1); /* No driver was available, so fail. */
652
}
653
654
655
finalize_audio_entry_points();
656
return (0);
657
658
}
659
660
661
662
663
/*
* Get the current audio driver name
*/
const char *
SDL_GetCurrentAudioDriver()
664
{
665
return current_audio.name;
666
667
}
668
669
int
670
SDL_GetNumAudioDevices(int iscapture)
671
{
672
673
674
675
676
677
if (!SDL_WasInit(SDL_INIT_AUDIO)) {
return -1;
}
if ((iscapture) && (!current_audio.impl.HasCaptureSupport)) {
return 0;
}
678
679
680
if ((iscapture) && (current_audio.impl.OnlyHasDefaultInputDevice)) {
return 1;
681
682
}
683
684
if ((!iscapture) && (current_audio.impl.OnlyHasDefaultOutputDevice)) {
return 1;
685
686
}
687
688
689
690
691
692
693
694
695
696
return current_audio.impl.DetectDevices(iscapture);
}
const char *
SDL_GetAudioDeviceName(int index, int iscapture)
{
if (!SDL_WasInit(SDL_INIT_AUDIO)) {
SDL_SetError("Audio subsystem is not initialized");
return NULL;
697
}
698
699
700
701
if ((iscapture) && (!current_audio.impl.HasCaptureSupport)) {
SDL_SetError("No capture support");
return NULL;
702
}
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
if (index < 0) {
SDL_SetError("No such device");
return NULL;
}
if ((iscapture) && (current_audio.impl.OnlyHasDefaultInputDevice)) {
return DEFAULT_INPUT_DEVNAME;
}
if ((!iscapture) && (current_audio.impl.OnlyHasDefaultOutputDevice)) {
return DEFAULT_OUTPUT_DEVNAME;
}
return current_audio.impl.GetDeviceName(index, iscapture);
}
static void
722
close_audio_device(SDL_AudioDevice * device)
723
724
725
726
727
728
729
{
device->enabled = 0;
if (device->thread != NULL) {
SDL_WaitThread(device->thread, NULL);
}
if (device->mixer_lock != NULL) {
SDL_DestroyMutex(device->mixer_lock);
730
}
731
732
if (device->fake_stream != NULL) {
SDL_FreeAudioMem(device->fake_stream);
733
}
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
if (device->convert.needed) {
SDL_FreeAudioMem(device->convert.buf);
}
if (device->opened) {
current_audio.impl.CloseDevice(device);
device->opened = 0;
}
SDL_FreeAudioMem(device);
}
/*
* Sanity check desired AudioSpec for SDL_OpenAudio() in (orig).
* Fills in a sanitized copy in (prepared).
* Returns non-zero if okay, zero on fatal parameters in (orig).
*/
static int
751
prepare_audiospec(const SDL_AudioSpec * orig, SDL_AudioSpec * prepared)
752
{
753
SDL_memcpy(prepared, orig, sizeof(SDL_AudioSpec));
754
755
756
757
758
759
760
761
if (orig->callback == NULL) {
SDL_SetError("SDL_OpenAudio() passed a NULL callback");
return 0;
}
if (orig->freq == 0) {
const char *env = SDL_getenv("SDL_AUDIO_FREQUENCY");
762
763
if ((!env) || ((prepared->freq = SDL_atoi(env)) == 0)) {
prepared->freq = 22050; /* a reasonable default */
764
765
}
}
766
767
768
769
if (orig->format == 0) {
const char *env = SDL_getenv("SDL_AUDIO_FORMAT");
if ((!env) || ((prepared->format = SDL_ParseAudioFormat(env)) == 0)) {
770
prepared->format = AUDIO_S16; /* a reasonable default */
771
772
773
774
}
}
switch (orig->channels) {
775
776
case 0:{
const char *env = SDL_getenv("SDL_AUDIO_CHANNELS");
777
if ((!env) || ((prepared->channels = (Uint8) SDL_atoi(env)) == 0)) {
778
779
780
prepared->channels = 2; /* a reasonable default */
}
break;
781
}
782
783
784
785
786
787
case 1: /* Mono */
case 2: /* Stereo */
case 4: /* surround */
case 6: /* surround with center and lfe */
break;
default:
788
789
SDL_SetError("Unsupported number of audio channels.");
return 0;
790
}
791
792
793
if (orig->samples == 0) {
const char *env = SDL_getenv("SDL_AUDIO_SAMPLES");
794
if ((!env) || ((prepared->samples = (Uint16) SDL_atoi(env)) == 0)) {
795
796
797
798
799
800
801
802
/* Pick a default of ~46 ms at desired frequency */
/* !!! FIXME: remove this when the non-Po2 resampling is in. */
const int samples = (prepared->freq / 1000) * 46;
int power2 = 1;
while (power2 < samples) {
power2 *= 2;
}
prepared->samples = power2;
803
804
}
}
805
806
807
808
809
810
811
812
813
814
/* Calculate the silence and size of the audio specification */
SDL_CalculateAudioSpec(prepared);
return 1;
}
static SDL_AudioDeviceID
open_audio_device(const char *devname, int iscapture,
815
816
const SDL_AudioSpec * desired, SDL_AudioSpec * obtained,
int allowed_changes, int min_id)
817
818
{
SDL_AudioDeviceID id = 0;
819
SDL_AudioSpec _obtained;
820
SDL_AudioDevice *device;
821
SDL_bool build_cvt;
822
823
824
825
826
int i = 0;
if (!SDL_WasInit(SDL_INIT_AUDIO)) {
SDL_SetError("Audio subsystem is not initialized");
return 0;
827
}
828
829
830
831
if ((iscapture) && (!current_audio.impl.HasCaptureSupport)) {
SDL_SetError("No capture support");
return 0;
832
}
833
834
835
836
837
if (!obtained) {
obtained = &_obtained;
}
if (!prepare_audiospec(desired, obtained)) {
838
839
return 0;
}
840
841
842
843
844
/* If app doesn't care about a specific device, let the user override. */
if (devname == NULL) {
devname = SDL_getenv("SDL_AUDIO_DEVICE_NAME");
}
845
846
847
848
849
850
851
852
853
854
/*
* Catch device names at the high level for the simple case...
* This lets us have a basic "device enumeration" for systems that
* don't have multiple devices, but makes sure the device name is
* always NULL when it hits the low level.
*
* Also make sure that the simple case prevents multiple simultaneous
* opens of the default system device.
*/
855
856
857
858
859
860
861
if ((iscapture) && (current_audio.impl.OnlyHasDefaultInputDevice)) {
if ((devname) && (SDL_strcmp(devname, DEFAULT_INPUT_DEVNAME) != 0)) {
SDL_SetError("No such device");
return 0;
}
devname = NULL;
862
863
864
865
866
867
868
for (i = 0; i < SDL_arraysize(open_devices); i++) {
if ((open_devices[i]) && (open_devices[i]->iscapture)) {
SDL_SetError("Audio device already open");
return 0;
}
}
869
870
}
871
872
873
874
875
876
if ((!iscapture) && (current_audio.impl.OnlyHasDefaultOutputDevice)) {
if ((devname) && (SDL_strcmp(devname, DEFAULT_OUTPUT_DEVNAME) != 0)) {
SDL_SetError("No such device");
return 0;
}
devname = NULL;
877
878
879
880
881
882
883
884
for (i = 0; i < SDL_arraysize(open_devices); i++) {
if ((open_devices[i]) && (!open_devices[i]->iscapture)) {
SDL_SetError("Audio device already open");
return 0;
}
}
}
885
886
device = (SDL_AudioDevice *) SDL_AllocAudioMem(sizeof(SDL_AudioDevice));
887
888
889
if (device == NULL) {
SDL_OutOfMemory();
return 0;
890
}
891
SDL_memset(device, '\0', sizeof(SDL_AudioDevice));
892
device->spec = *obtained;
893
894
895
device->enabled = 1;
device->paused = 1;
device->iscapture = iscapture;
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
/* Create a semaphore for locking the sound buffers */
if (!current_audio.impl.SkipMixerLock) {
device->mixer_lock = SDL_CreateMutex();
if (device->mixer_lock == NULL) {
close_audio_device(device);
SDL_SetError("Couldn't create mixer lock");
return 0;
}
}
if (!current_audio.impl.OpenDevice(device, devname, iscapture)) {
close_audio_device(device);
return 0;
}
device->opened = 1;
912
913
/* Allocate a fake audio memory buffer */
914
915
916
device->fake_stream = SDL_AllocAudioMem(device->spec.size);
if (device->fake_stream == NULL) {
close_audio_device(device);
917
SDL_OutOfMemory();
918
return 0;
919
920
}
921
922
923
924
925
926
/* If the audio driver changes the buffer size, accept it */
if (device->spec.samples != obtained->samples) {
obtained->samples = device->spec.samples;
SDL_CalculateAudioSpec(obtained);
}
927
/* See if we need to do any conversion */
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
build_cvt = SDL_FALSE;
if (obtained->freq != device->spec.freq) {
if (allowed_changes & SDL_AUDIO_ALLOW_FREQUENCY_CHANGE) {
obtained->freq = device->spec.freq;
} else {
build_cvt = SDL_TRUE;
}
}
if (obtained->format != device->spec.format) {
if (allowed_changes & SDL_AUDIO_ALLOW_FORMAT_CHANGE) {
obtained->format = device->spec.format;
} else {
build_cvt = SDL_TRUE;
}
}
if (obtained->channels != device->spec.channels) {
if (allowed_changes & SDL_AUDIO_ALLOW_CHANNELS_CHANGE) {
obtained->channels = device->spec.channels;
} else {
build_cvt = SDL_TRUE;
}
}
if (build_cvt) {
951
/* Build an audio conversion block */
952
if (SDL_BuildAudioCVT(&device->convert,
953
954
obtained->format, obtained->channels,
obtained->freq,
955
956
957
958
device->spec.format, device->spec.channels,
device->spec.freq) < 0) {
close_audio_device(device);
return 0;
959
}
960
if (device->convert.needed) {
961
device->convert.len = (int) (((double) obtained->size) /
962
device->convert.len_ratio);
963
964
965
966
967
968
device->convert.buf =
(Uint8 *) SDL_AllocAudioMem(device->convert.len *
device->convert.len_mult);
if (device->convert.buf == NULL) {
close_audio_device(device);
969
SDL_OutOfMemory();
970
return 0;
971
972
973
}
}
}
974
975
/* Find an available device ID and store the structure... */
976
for (id = min_id - 1; id < SDL_arraysize(open_devices); id++) {
977
978
979
980
981
982
983
984
985
986
987
988
if (open_devices[id] == NULL) {
open_devices[id] = device;
break;
}
}
if (id == SDL_arraysize(open_devices)) {
SDL_SetError("Too many open audio devices");
close_audio_device(device);
return 0;
}
989
/* Start the audio thread if necessary */
990
if (!current_audio.impl.ProvidesOwnCallbackThread) {
991
/* Start the audio thread */
992
/* !!! FIXME: this is nasty. */
993
#if (defined(__WIN32__) && !defined(_WIN32_WCE)) && !defined(HAVE_LIBC)
994
#undef SDL_CreateThread
995
device->thread = SDL_CreateThread(SDL_RunAudio, device, NULL, NULL);
996
#else
997
device->thread = SDL_CreateThread(SDL_RunAudio, device);
998
#endif
999
if (device->thread == NULL) {
1000
SDL_CloseAudioDevice(id + 1);